Re: [hylafax-users] modem ACL per user

[Martin Vit <vit@xxxxxx>]

Aidan Van Dyk wrote:

> * Lee Howard <faxguy@xxxxxxxxxxxxxxxx> [051003 09:58]:
>  
>
> > If all you're trying to do is to set the Caller*ID information then you 
> > can do that in your Asterisk PBX.  Think about prefixing your dialstring 
> > with a specific code per-user... the PBX uses this information to set 
> > Caller*ID and to produce a true dialstring.
> >
> > Most modems don't have a way to set the Caller*ID values, so for the 
> > most part you'll have to do something similar to the above in order to 
> > reuse modems with different users.  IAXmodem will eventually have the 
> > capability to set the Caller*ID information with AT commands, but most 
> > modems don't and won't ever likely.
> >    
>
> Other devices (like t38modem) are using a cid@did format for the "dial
> string"...  Using something like that, it would be easy to use a faxsend
> wrapper which would specify a different "ModemDialCmd" based on who the
> job owner is, and make your device "dial" something like:
> 	ATDTcid@1NXXNXXXXXX
>  
how to extract job owner? i've looked into job.h and there is no 
user/uid structure.
If i can modify dialstring based on job's owner (hylafax username) it 
would solve my problem.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*