Re: [hylafax-users] Use2D on Solaris with Hylafax 4.2.1

["Support" <support@xxxxxxxxxxxx>]

Hi James.

We've had customers who've used our products under Solaris by using the
generic serial driver.  I don't have the details to hand, but if you're
interested then drop me an email and I'll look up the details.

Regards

ANDREW RINALDI
Mainpine Support Manager
USA +1 718 701 2422 | Asia/Europe +44 1225 436137 
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com 

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Roberts-Thomson,
James
Sent: 21 September 2005 22:34
To: Aidan Van Dyk
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Use2D on Solaris with Hylafax 4.2.1

> Is this happening to *all* receivers, or just a particular receiver?

Well, technically "all", but since my testing currently consists of sending
to a single fax machine..... :-)

> If it's *all* receivers, then it looks like there is a more serious 
> problem somewhere...

I'm using "Digi AccelePort RAS" cards (previously purchased), which
according to the mailing list archives are known to be dodge; and this
probably isn't helping.  Sigh.

Would the list like to suggest a better PCI multi-port card for use in Sun
Solaris hardware (i.e. must have proper Solaris driver support!) ?

>If you need to disable 2-D MR/MMR, you will need to disable the 
>software
RTFCC.

OK, not obvious to my mind, but thanks, will try this.

>And if the problem isn't with all receivers, but just a particular 
>number you can set these in destctrls to only disable 2D-MR/MMR for a 
>particular receiver.

Well, it worked OK with HylaFAX 4.1.8 on the same receiving machine.....

Anyway, thanks for the help, and will see how far I get now.

James Roberts-Thomson
Senior Systems Engineer (Unix)
IM Solution Design
ANZ National Bank Limited
Tel: +64 4 470-5360 


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*