Re: [hylafax-users] FaxQueuer[10128]: NOTIFY: bin/notify "doneq/q 12" "killed" ""

[Andreas Moser <A.Moser@xxxxxx>]

Guido Hecken schrieb:

Hello list,

I have a fresh new installed Debian System (Kernelversion 2.6.8-2-686),
one FRITZ!CARD PCI ISDN device and want to build on this system an new
faxserver. I've installed the hylafax-server, hylafax-client and
capi4hylafax packages. At the moment it is possible to call a telephone
with c2faxsend (cmd=  c2faxsend -f G3 -d 49109 /root/test). If I answer
the phone I can hear the faxing sound. And if I call the faxserver with
my telephone, I'll get the faxing sound too.

On my windows System I've installed the Hylafax Client WHFC. I tried to
send a textfile to my telephonenumber, but got no call. I checked the
log files (/var/log/syslog) and there where the following entries:

Sep 2 15:39:10 alpha FaxQueuer[9656]: SUBMIT JOB 9
Sep 2 15:39:10 alpha FaxQueuer[9656]: NOTIFY: bin/notify "doneq/q9"
"failed" "0:00"
Sep 2 15:39:11 alpha FaxQueuer[9656]: NOTIFY exit status: 0 (9761)

To see the whole logging script, I enabled the option ServerTracing in
the /etc/hylafax/config file. I tried to send a fax again and got the
following entries:
    

....

 
  

Thx for help.
Best regards Andreas

/etc/hylafax/config

#ContCoverPage:         "etc/cover.templ"
#DestControls:          "etc/destctrls"
#DialStringRules:       "etc/dialrules"
#QualifyCID:            "etc/cid"
#QualifyTSI:            "etc/tsi"
#ServerTracing:         0x08501
#InternationalPrefix:   00
    

Shouldn't it be
SendFaxCmd: 	"/usr/bin/c2faxsend" 

  

SendFaxCmd: /usr/bin/c2faxsend	
ServerTracing:          0xFFFFFFFFFF


/etc/hylafax/config.faxCAPI

SpoolDir:               /var/spool/hylafax
FaxRcvdCmd:
PollRcvdCmd:             /var/spool/hylafax/bin/pollrcvd
FaxReceiveUser:         uucp
FaxReceiveGroup:        dialout
LogFile:                /var/spool/hylafax/log/capi4hylafax
LogTraceLevel:          4
LogFileMode:            0600
{
    HylafaxDeviceName:          faxCAPI
    RecvFileMode:               0644
    FAXNumber:                  "+49.xxxx.xxxxxx"
    LocalIdentifier:            "Andreas"
    MaxConcurrentRecvs:         1
    OutgoingController:         1
    OutgoingMSN:               "xxxxxx"
    SuppressMSN:                0
    NumberPrefix:
    UseISDNFaxService:          0
    RingingDuration:            0
    {
        Controller:             1
        AcceptSpeech:           1
        UseDDI:                 0
        DDIOffset:              "12345"
        DDILength:              3
        IncomingDDIs:
        IncomingMSNs: "xxxxxx"
        AcceptGlobalCall:   1
    }
}

    

I had similar problems with capi4hylafax and the c2faxsend prog.

Perhaps, try the contents of this mail I sent before a few days to the list 


The problem was, a wrapper-script. Since AVM has a bug in it's c2sendfax
script or in the capi implemantation, I had to use a wrapper-script to
bypass this bug.
The bug is, that facsimiles are marked as unsuccessfull sent even though
they were sent successfull. The script I used, was from Gerhard Brauer and
found on the debian-user-german list. But there was a little problem in it,
as it moves the qfile! I think after moving the qfile, the
permissions/ownership of the qfile were set from those of the faxuser to
those of uucp. 
By using an edit in place with the 'operatingsystem vi' ;-) the file
maintains it permissions.

Here is a wrapper wrapper-script:

#!/bin/sh

# name it c2sendfax.wrap and place it with rx permissions for uucp:dialout
under #/usr/local/bin 
# don't forget a line in /var/spool/hylafax/config and/or config.c2fax like
# SendFaxCmd:             "/usr/local/bin/c2faxsend.wrap"

/usr/bin/c2faxsend "$@"
rc=$?
eval qfile=\$$#
# in place editing by Guido Hecken
vi -c '%s/^returned:0$/returned:'${rc}'/' -c 'wq' ${qfile}
exit $rc

Did you check that the fax you tried to send was really not sent?
Have a close look in the qfile in doneq at the value "returned:"
If there is a "returned:1" and the fax was recieved sucessfully, you seem to
have the same bug as I had. Then the wrapper-script might help.

BTW AVM states, that there is no problem with c2faxsend!

Hope, I could help a little bit

Regards

Guido Hecken


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


  

Hello Guido,
hello list,

thx for answering my mail. I changed the script and implemented yours.
I've restarted the hylafax-server and tried to send a facsimile again. Now I got the following messages. But I can't explain what those messages mean.

Sep  4 18:52:34 alpha FaxQueuer[3637]: FIFO SEND client/3820 msg "S*"
Sep  4 18:52:34 alpha FaxQueuer[3637]: JOB 28 (ready dest 49109 pri 127 tts 0:00 killtime 1:00:00): PROCESS
Sep  4 18:52:34 alpha FaxQueuer[3637]: JOB 28 (active dest 49109 pri 127 tts 0:00 killtime 1:00:00): ACTIVE
Sep  4 18:52:34 alpha FaxQueuer[3637]: JOB 28 (active dest 49109 pri 127 tts 0:00 killtime 1:00:00): PREPARE START
Sep  4 18:52:34 alpha FaxQueuer[3821]: JOB 28 (active dest 49109 pri 127 tts 0:00 killtime 1:00:00): CONVERT DOCUMENT: bin/tiff2fax -o docq/doc27.ps;01 -r 196 -w 1728 -l 297 -m 4294967295 -1 docq/doc27.ps.28
Sep  4 18:52:35 alpha FaxQueuer[3637]: JOB 28 (active dest 49109 pri 127 tts 0:00 killtime 59:59): PREPARE DONE
Sep  4 18:52:35 alpha FaxQueuer[3637]: JOB 28 (active dest 49109 pri 127 tts 0:00 killtime 59:59): CMD START /usr/local/bin/c2faxsend.wrap -m faxCAPI sendq/q28 (PID 3834)
Sep  4 18:52:45 alpha FaxQueuer[3637]: JOB 28 (active dest 49109 pri 127 tts 0:00 killtime 59:49): CMD DONE: exit status 0
Sep  4 18:52:45 alpha FaxQueuer[3637]: JOB 28 (sleeping dest 49109 pri 126 tts 0:00 killtime 59:49): SEND INCOMPLETE: requeue for 4:25;
Sep  4 18:52:45 alpha FaxQueuer[3637]: JOB 28 (sleeping dest 49109 pri 126 tts 0:00 killtime 59:49): SLEEP FOR 4:25
Sep  4 18:57:10 alpha FaxQueuer[3637]: JOB 28 (ready dest 49109 pri 126 tts 0:00 killtime 55:24): READY
Sep  4 18:57:10 alpha FaxQueuer[3637]: JOB 28 (ready dest 49109 pri 126 tts 0:00 killtime 55:24): PROCESS
Sep  4 18:57:10 alpha FaxQueuer[3637]: JOB 28 (active dest 49109 pri 126 tts 0:00 killtime 55:24): ACTIVE
Sep  4 18:57:10 alpha FaxQueuer[3637]: JOB 28 (active dest 49109 pri 126 tts 0:00 killtime 55:24): CMD START /usr/local/bin/c2faxsend.wrap -m faxCAPI sendq/q28 (PID 3840)
Sep  4 18:57:20 alpha FaxQueuer[3637]: JOB 28 (active dest 49109 pri 126 tts 0:00 killtime 55:14): CMD DONE: exit status 0
Sep  4 18:57:20 alpha FaxQueuer[3637]: JOB 28 (sleeping dest 49109 pri 125 tts 0:00 killtime 55:14): SEND INCOMPLETE: requeue for 7:23;
Sep  4 18:57:20 alpha FaxQueuer[3637]: JOB 28 (sleeping dest 49109 pri 125 tts 0:00 killtime 55:14): SLEEP FOR 7:23

After 5 minutes waiting I've killed the job:

Sep  4 18:57:38 alpha FaxQueuer[3637]: FIFO RECV "Kclient/3842:28"
Sep  4 18:57:38 alpha FaxQueuer[3637]: KILL JOB 28
Sep  4 18:57:38 alpha FaxQueuer[3637]: DOC UNREF: docq/doc27.ps;01 files docq/doc27.ps;01
Sep  4 18:57:38 alpha FaxQueuer[3637]: DOC UNREF: expunge imaged files
Sep  4 18:57:38 alpha FaxQueuer[3637]: NOTIFY: bin/notify "doneq/q28" "killed" ""
Sep  4 18:57:38 alpha FaxQueuer[3637]: JOB 28 (failed dest 49109 pri 125 tts 7:05 killtime 54:56): DEAD
Sep  4 18:57:38 alpha FaxQueuer[3637]: FIFO SEND client/3842 msg "K*"
Sep  4 18:57:38 alpha FaxQueuer[3637]: JOB 28 (failed dest 49109 pri 125 tts 7:05 killtime 54:56): DELETE
Sep  4 18:57:38 alpha FaxQueuer[3637]: NOTIFY exit status: 0 (3843)

Can you explain where my problem is? I got no call at number 49109.

The receiving of a facsmile from web.de is working. Only the delivery is still not working.

Thx for help
Best regards Andreas