|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Faxgetty cannot send fax and always say LOCKWAIT
I am using HylaFAX v4.2.1 under Linux RedHat 7.3 with gcc 2.96 MODEM
ROCKWELL RC288DPi/ACF3_V1.900E-V90_P21_FSH
For receiving fax, no problem.
But when I try to send fax (I am using WHFC v1.2.3 on Win2000), the
server won't send.
I get the see /var/log/messages and it always tells me "LOCKWAIT" for a
lot of times
it doesn't dial and report any error.
I have try to reboot the server, modem.
And even try to reinstall the whole program, but no help.
Who can help me??
Aug 1 19:56:58 icsl FaxQueuer[2452]: SUBMIT JOB 5
Aug 1 19:56:58 icsl FaxGetty[2464]: LOCKWAIT
Aug 1 19:56:58 icsl last message repeated 36 times
Aug 1 19:57:30 icsl FaxGetty[2464]: MODEM set DTR OFF
Aug 1 19:57:30 icsl FaxGetty[2464]: DELAY 75 ms
Aug 1 19:57:30 icsl FaxGetty[2464]: MODEM set DTR ON
Aug 1 19:57:30 icsl FaxGetty[2464]: DELAY 2600 ms
Aug 1 19:57:33 icsl FaxGetty[2464]: MODEM set baud rate: 19200 baud,
input flow RTS/CTS, output flow RTS/CTS
Aug 1 19:57:33 icsl FaxGetty[2464]: DELAY 10 ms
Aug 1 19:57:33 icsl FaxGetty[2464]: MODEM flush i/o
Aug 1 19:57:33 icsl FaxGetty[2464]: <-- [4:ATZ\r]
Aug 1 19:57:33 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:33 icsl FaxGetty[2464]: DELAY 3000 ms
Aug 1 19:57:36 icsl FaxGetty[2464]: MODEM flush i/o
Aug 1 19:57:36 icsl FaxGetty[2464]: <-- [7:ATS0=0\r]
Aug 1 19:57:36 icsl FaxGetty[2464]: --> [6:ATS0=0]
Aug 1 19:57:36 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:36 icsl FaxGetty[2464]: <-- [5:ATE0\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [4:ATE0]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [5:ATV1\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [5:ATQ0\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [7:ATS8=2\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [8:ATS7=60\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [6:AT&K3\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [6:AT&D2\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [6:AT&C1\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [12:AT+FCLASS=?\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [12:0,1,1.0,8,10]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [12:AT+FCLASS=1\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [5:ATI3\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [24:ACF3_V1.900E-V90_P21_FSH]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [9:AT+FTM=?\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [9:AT+FRM=?\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: MODEM ROCKWELL
RC288DPi/ACF3_V1.900E-V90_P21_FSH
Aug 1 19:57:37 icsl FaxGetty[2464]: <-- [5:ATM0\r]
Aug 1 19:57:37 icsl FaxGetty[2464]: --> [2:OK]
Aug 1 19:57:37 icsl FaxGetty[2464]: MODEM input buffering disabled
config.ttyS0 --------------------------------------------
CountryCode: 852
FAXNumber: 21161234
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 0x4f
SessionTracing: 0x4f
RecvFileMode: 0666
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: Innotech
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use this to supply a hint
ModemRate: 19200 # rate for DCE-DTE communication
ModemFlowControl: rtscts # default
#
ModemNoFlowCmd: AT&K0 # setup no flow control
ModemHardFlowCmd: AT&K3 # setup hardware flow control
ModemSoftFlowCmd: AT&K4 # setup software flow control
ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier
(or not)
#
ModemMfrQueryCmd: !Rockwell
ModemModelQueryCmd: !RC288DPi
ModemRevQueryCmd: ATI3 # product information
#
ModemDialCmd: ATDT%s # T for tone dialing
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
