Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] batching almost there




On Jul 29, 2005, at 5:13 PM, Bodo Meissner wrote:


Am 2005.07.29 08:15 schrieb(en) Lee Howard:


The original author seems to have wanted that "jitter" there to prevent the same events from happening over time... I guess he believed that by randomizing the reschedule time that some time- related problems could be avoided.



Think of two Hylafax systems with default (or otherwise identical) settings and only one modem line each.
Assume system A has a job for receiver X that always fails and will be re-scheduled until a limit is reached.
Further assume System B wants to send a fax to system A and just tries to send it when A is trying to send to X.
A's job to X fails and A re-schedules the job.
B will get a busy signal and re-schedule the job.
With identical settings and without jitter it may be possible that several or all retries on System B will get a busy signal because A is retrying in the same interval. With jitter this is very unlikely.



but the whole point is that argument goes out of the window, because you can schedule the time of say 50 faxes without 'jitter', just by setting them to the same "TTS"


also the fact is that , because the "TTS" is at a milisecond level on the submitting of jobs, the chance of 2 remote hylafax systems :
1. having exactly the same "TTS"
2. having the same "retry time"
3. triggering the jobs at exactly the same time.


is going to be fairly remote.

The other thing is i think the "jitter" is a myth!!! ( see the last job)



As a point on how good this is looking, here is 3 recent jobs!! 1+1+2:

Your facsimile job to 0-86449887 was completed successfully.

           Pages: 1
        Receiver: <UNSPECIFIED>
         Quality: Fine
      Page Width: 210 (mm)
     Page Length: 297 (mm)
     Signal Rate: 14400 bit/s
     Data Format: 2-D MMR
Remote Equipment: Canon
  Remote Station:
  Submitted From: 192.168.2.65
           JobID: 38
         GroupID: 38
          CommID: c000000065

Processing time was 2:15.

Your facsimile job to 0-86449887 was completed successfully.

           Pages: 1
        Receiver: <UNSPECIFIED>
         Quality: Fine
      Page Width: 210 (mm)
     Page Length: 297 (mm)
     Signal Rate: 14400 bit/s
     Data Format: 2-D MMR
Remote Equipment: Canon
  Remote Station:
  Submitted From: 192.168.2.65
           JobID: 37
         GroupID: 37
          CommID: c000000065

Processing time was 2:15.

Your facsimile job to 0-86449887 was completed successfully.

           Pages: 2
        Receiver: <UNSPECIFIED>
         Quality: Fine
      Page Width: 210 (mm)
     Page Length: 297 (mm)
     Signal Rate: 14400 bit/s
     Data Format: 2-D MMR
Remote Equipment: Canon
  Remote Station:
  Submitted From: 192.168.2.65
           JobID: 39
         GroupID: 39
          CommID: c000000065

Processing time was 2:15.

I sent 4 pages on 3 separate jobs for the cost of 1 phone call, and a reduction in tied up phone lines & modems. this has to be a good way to go , for batching anyway.
but see the next 2 jobs as well, the last one is the most interesting



and again!!



Your facsimile job to 0-86777432 was completed successfully.


           Pages: 1
        Receiver:
         Quality: Fine
      Page Width: 210 (mm)
     Page Length: 297 (mm)
     Signal Rate: 9600 bit/s
     Data Format: 2-D MR
Remote Equipment: Sharp/Olivetti Sharp UX-460
  Remote Station:
  Submitted From: 192.168.2.65
           JobID: 41
         GroupID: 41
          CommID: c000000064

Processing time was 3:53.

Your facsimile job to 0-86777432 was completed successfully.

           Pages: 1
        Receiver:
         Quality: Fine
      Page Width: 210 (mm)
     Page Length: 297 (mm)
     Signal Rate: 9600 bit/s
     Data Format: 2-D MR
Remote Equipment: Sharp/Olivetti Sharp UX-460
  Remote Station:
  Submitted From: 192.168.2.65
           JobID: 40
         GroupID: 40
          CommID: c000000064

Processing time was 3:53.

Your facsimile job to 0-86777432 was completed successfully.

           Pages: 2
        Receiver:
         Quality: Fine
      Page Width: 210 (mm)
     Page Length: 297 (mm)
     Signal Rate: 9600 bit/s
     Data Format: 2-D MR
Remote Equipment: Sharp/Olivetti Sharp UX-460
  Remote Station:
  Submitted From: 192.168.2.65
           JobID: 42
         GroupID: 42
          CommID: c000000064

Processing time was 3:53.
*****************************************************

now here is the real interesting one!!!, note the RETRY TIME!! 18:01


Your facsimile job to 00769-2671302 was not sent because: Busy signal detected

The job will be retried at 18:01.

---- Transcript of session follows ----

Jul 29 17:43:21.82: [22760]: SESSION BEGIN 000000063 7692671302
Jul 29 17:43:21.82: [22760]: HylaFAX (tm) Version 4.2.2beta1
Jul 29 17:43:21.82: [22760]: SEND FAX: JOB 35 DEST 00769-2671302 COMMID 000000063 DEVICE '/dev/ttyS1'
Jul 29 17:43:21.82: [22760]: <-- [12:AT+FCLASS=1\r]
Jul 29 17:43:21.83: [22760]: --> [2:OK]
Jul 29 17:43:21.83: [22760]: DIAL 007692671302
Jul 29 17:43:21.83: [22760]: <-- [17:ATDT007692671302\r]
Jul 29 17:43:29.29: [22760]: --> [4:BUSY]
Jul 29 17:43:29.29: [22760]: SEND FAILED: JOB 35 DEST 00769-2671302 ERR Busy signal detected
Jul 29 17:43:29.29: [22760]: <-- [5:ATH0\r]
Jul 29 17:43:29.30: [22760]: --> [2:OK]
Jul 29 17:43:29.30: [22760]: SESSION END


( not sent because the last job was busy)

Your facsimile job to 00769-2671302 was not sent because:
    <no reason recorded>

The job will be retried at 18:01.

---- Transcript of session follows ----

No transcript available.


Your facsimile job to 00769-2671302 was not sent because: <no reason recorded>

The job will be retried at 18:01.

---- Transcript of session follows ----

No transcript available.


**** THIS IS THE RE-TRY******* ****IT ACTUALLY EVEN BATCHED THE RETRIES******* 1+1+1

Your facsimile job to 00769-2671302 was completed successfully.

           Pages: 1
        Receiver: 2671302
         Quality: Fine
      Page Width: 210 (mm)
     Page Length: 297 (mm)
     Signal Rate: 14400 bit/s
     Data Format: 2-D MMR
Remote Equipment: Canon Laser Class 9000 Series
  Remote Station: NEWSHENGDA
  Submitted From: 192.168.2.65
           JobID: 34
         GroupID: 34
          CommID: c000000066

Processing time was 1:57.

Your facsimile job to 00769-2671302 was completed successfully.

           Pages: 1
        Receiver: 2671302
         Quality: Fine
      Page Width: 210 (mm)
     Page Length: 297 (mm)
     Signal Rate: 14400 bit/s
     Data Format: 2-D MMR
Remote Equipment: Canon Laser Class 9000 Series
  Remote Station: NEWSHENGDA
  Submitted From: 192.168.2.65
           JobID: 36
         GroupID: 36
          CommID: c000000066

Processing time was 1:57.

Your facsimile job to 00769-2671302 was completed successfully.

           Pages: 1
        Receiver: 2671302
         Quality: Fine
      Page Width: 210 (mm)
     Page Length: 297 (mm)
     Signal Rate: 14400 bit/s
     Data Format: 2-D MMR
Remote Equipment: Canon Laser Class 9000 Series
  Remote Station: NEWSHENGDA
           Calls: 2 (total phone calls placed)
  Submitted From: 192.168.2.65
           JobID: 35
         GroupID: 35
          CommID: c000000066

Processing time was 1:57.

WOW!!
 I think we can say batching is definatly here!!

Bodo


____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/ lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < / dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*








____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services