Re: [hylafax-users] Login error 530 with hylafax 4.2.1

["offman@xxxxxxxxxxxxxxxx" <offman@xxxxxxxxxxxxxxxx>]

just a quick tip Frank,

you might not want to do  this:

> ^frank@xxxxxxxxxxxx:1000:kIe1KgFAVL1t2
> ^katharina@xxxxxxxxxxxx:1001:7URNTzO5a0pCg
> ^katharina@xxxxxxxxxxxx$::SFOahcYRKpozU
> ^katharina@xxxxxxxxxxxx$::/Fc7GSBIRf/4k
> ^katharina@xxxxxxxxxxxx$::d4JnYYgEP6S6s
> ^frank@xxxxxxxxxxxx$::sT6A7gyzwuBhM
> ^frank@xxxxxxxxxxxx$::3WAHEcwvbiYks
> ^frank@xxxxxxxxxxxx$::8Fm4lgA4uP9

as it gives all your password hashes  away.

try something simple first.
1. you seem to have a duplicate IPaddress for your server &  2 of  
your clients?
192.168.0.18

anyway
2. empty your hosts file ( back it up first)

then enter something simple

such as
faxadduser -p XXXXXXX -u faxusers

now from the server try to send a fax.
if that works :
log into a client and using the above password & user , send a fax.

that should work, you don't need the ipaddresses, we can add them later.

what it may be is that you are running a dhcp server and that is  
issuing different ip addresses for the clients.
if that is the case, then your system is 100% correctly rejecting the  
logins.




On Jul 29, 2005, at 3:37 PM, Frank Geschner wrote:

> Hello everybody,
>
> a few days ago I already submitted this request. But there was no
> response. Most likely, the problem is too simple to deal with it. If
> this is the cause I would appreciate it if anybody could point me out
> the problem. Also, I could not solve the problem by reading the FAQ.
>
> After updating to hylafax version is 4.2.1 at the server  
> 192.168.0.18. I
> want to access to hylafax by Windows and Linux clients whfc and pyla.
> But it doesn't work.
>
> I Added the follwing users by faxaddusers:
>
> kaefer:~# faxadduser -p xxxxxxx -h 192.168.0.16 katharina
> kaefer:~# faxadduser -p xxxxxxx -h 192.168.0.17 katharina
> kaefer:~# faxadduser -p xxxxxxx -h 192.168.0.18 katharina
> kaefer:~# faxadduser -p yyyyyy -h 192.168.0.16 frank
> kaefer:~# faxadduser -p yyyyyy -h 192.168.0.17 frank
> kaefer:~# faxadduser -p yyyyyy -h 192.168.0.18 frank
>
> The used passwords are simultaneously the login passwords. After
> restarting hylafax I have expected that I can access to hylafax by  
> using
> the above defined passwords. But far from it. At the server  
> 192.168.0.18
> I entered the following command as the user frank to get the status of
> hylafax. Afterwards I entered the according password and I got the  
> below
> displayed error message:
>
> frank@kaefer:~$ faxstat
> Password:
> Login failed: 530 Login incorrect.
>
> The same input as root results in:
>
> kaefer:~# faxstat
> Password:
> HylaFAX scheduler on kaefer.akw: Running
> Modem ttyS1 (+49.AAAAA.BBBB): Running and idle
> kaefer:~#
>
> The hosts file contains the following:
>
> kaefer:~# cat /etc/hylafax/hosts.hfaxd
> localhost:21::
> ^frank@xxxxxxxxxxxx:1000:kIe1KgFAVL1t2
> ^katharina@xxxxxxxxxxxx:1001:7URNTzO5a0pCg
> ^katharina@xxxxxxxxxxxx$::SFOahcYRKpozU
> ^katharina@xxxxxxxxxxxx$::/Fc7GSBIRf/4k
> ^katharina@xxxxxxxxxxxx$::d4JnYYgEP6S6s
> ^frank@xxxxxxxxxxxx$::sT6A7gyzwuBhM
> ^frank@xxxxxxxxxxxx$::3WAHEcwvbiYks
> ^frank@xxxxxxxxxxxx$::8Fm4lgA4uP99A
>
> I have tried a lot of combinations but nothing helps to solve my
> problem. Can anybody of you give me an advice what I can do.
>
> I would be very very grateful of every little help. Thanks in advance.
>
> Regards
> Frank
>
>
> ____________________ HylaFAX(tm) Users Mailing List  
> _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/ 
> lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < / 
> dev/null
>   *To learn about commercial HylaFAX(tm) support, mail  
> sales@xxxxxxxxx*



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*