Re: [hylafax-users] Hylafax and egetty

[Branko Markovic <bramar@xxxxxxxx>]

	We we started solving this problem, I said that my modem perfectly
works with vgetty only. AT+FCLASS=8 returns OK, and, AT+FCLASS=? returns
0,1,8. It supports voice. I will try to solve the problem by myself,
but, if you can help me, I will be very happy. The secont thing is that
this is Serbia and Montenegro, where can I get Multitech modem
here. :)))))

On Fri, 2005-06-03 at 09:40 -0400, George Bell wrote:
> On Fri, 2005-06-03 at 08:26 +0200, Branko Markovic wrote:
> > 	Thanx George,
> > but egetty.pl won't answer the line again. The thing that you sent me as
> > reply solved the problem with locking modem. I didn't
> > put /usr/local/bin/vm in PATHEGETTY. Symlink solved the problem. Anyway,
> > the line is not aswering. Here is log of /var/log/vm.log:
> > 
> > 06/03 08:02:40  reading program vm configuration from config
> > file /usr/local/etc
> > /mgetty+sendfax/voice.conf
> > 06/03 08:02:40  opening voice modem device
> > 06/03 08:02:40  we *have* the line!
> > 06/03 08:02:40  opened voice modem device /dev/ttySL0
> > 06/03 08:02:40  reading port ttySL0 configuration from config
> > file /usr/local/et
> > c/mgetty+sendfax/voice.conf
> > 06/03 08:02:40  detecting voice modem type
> > 06/03 08:02:42  Rockwell detected
> > 06/03 08:02:42  initializing ROCKWELL voice modem
> > 06/03 08:02:44  vm: Executing shell script /bin/egetty.pl with
> > shell /usr/local/bin/perl
> > --- This line below is strange to me. Do you maybe know what's this?
> > 06/03 08:02:46  vm: Nested command in shell script
> > --- The welcome.rmd message should be played after answering, but...
> > 06/03 08:02:46  playing voice file /var/spool/voice/messages/welcome.rmd
> > ---
> > 06/03 08:03:34  vm: timeout while reading character from voice modem
> > 06/03 08:03:34  vm: start_play_file command failed
> > 06/03 08:03:34  Rockwell: Unknown output device (9)
> > 06/03 08:03:34  vm: Modem returned ERROR
> > 06/03 08:03:34  recording voice file /var/spool/voice/incoming/temp.rmd
> > 06/03 08:03:46  vm: timeout while reading character from voice modem
> > 
> 
> egetty.pl works flawlessly on my MT5634-ZPX-PCI modem.  My initial guess
> is that your ROCKWELL modem doesn't even support voice.  Have you
> verified it?  If not, turn off faxgetty and/or vgetty(comment out/init
> q) and open minicom on /dev/ttySL0.  Enter FCLASS=?.  If 8 is among the
> modes listed, then the modem purports to support voice.
> 
> Either the modem doesn't support voice or not very well.  In the latter
> case you'll be in for some debugging at least.  If you prefer something
> that works out of the box, then I recommend replacing with a Multitech
> modem.
> 
> George
>  
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
-- 
---------------
Branko Markovic
bramar@xxxxxxxx
ICQ#: 132044291



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*