|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] loosing lines in received fax
Hi,
I'm fighting with one problem with hylafax 4.2.1 - receiving
side gets fax with some lines missing (like it skipped few one).
It's repeatable.
My modem (pentagram) is identified as:
MODEM VENUS V.90 KFAV173 SERIAL S090799AV Venus V.90 kfav173 Serial s090799aV/
and right now it works as class=1 fax.
One interesting thing in a log is
kwi 26 16:42:14.77: [26871]: REMOTE best vres 15.4 line/mm
and then
kwi 26 16:42:14.77: [26871]: USE 7.7 line/mm
It doesn't use best one (can this be a reason for my problem?).
log attached belov
kwi 26 16:41:56.01: [26871]: SESSION BEGIN 000000233 48525840924
kwi 26 16:41:56.01: [26871]: HylaFAX (tm) Version 4.2.1
kwi 26 16:41:56.01: [26871]: SEND FAX: JOB 103 DEST 5840924 COMMID 000000233 DEVICE '/dev/ttyS0'
kwi 26 16:41:56.01: [26871]: <-- [12:AT+FCLASS=1\r]
kwi 26 16:41:56.12: [26871]: --> [2:OK]
kwi 26 16:41:56.14: [26871]: DIAL 0,5840924
kwi 26 16:41:56.14: [26871]: <-- [14:ATDT0,5840924\r]
kwi 26 16:42:11.52: [26871]: --> [7:CONNECT]
kwi 26 16:42:13.65: [26871]: --> [2:OK]
kwi 26 16:42:13.65: [26871]: REMOTE NSF "00 00 0E 00 00 00 96 0F 01 03 00 10 05 02 95 C8 08 01 49 02 44 4F 4D 41 49 4E 41 5
3 53 49 53 54 41 4E 43 45 03"
kwi 26 16:42:13.65: [26871]: NSF remote fax equipment: Panasonic KX-F230 or KX-FT21 or ...
kwi 26 16:42:13.65: [26871]: NSF remote station ID: "..."
kwi 26 16:42:13.65: [26871]: <-- [9:AT+FRH=3\r]
kwi 26 16:42:13.67: [26871]: --> [7:CONNECT]
kwi 26 16:42:14.39: [26871]: --> [2:OK]
kwi 26 16:42:14.39: [26871]: REMOTE CSI "525840924"
kwi 26 16:42:14.39: [26871]: <-- [9:AT+FRH=3\r]
kwi 26 16:42:14.41: [26871]: --> [7:CONNECT]
kwi 26 16:42:14.77: [26871]: --> [2:OK]
kwi 26 16:42:14.77: [26871]: REMOTE best rate 9600 bit/s
kwi 26 16:42:14.77: [26871]: REMOTE max A4 page width (215 mm)
kwi 26 16:42:14.77: [26871]: REMOTE max unlimited page length
kwi 26 16:42:14.77: [26871]: REMOTE best vres 15.4 line/mm
kwi 26 16:42:14.77: [26871]: REMOTE best format 2-D MR
kwi 26 16:42:14.77: [26871]: REMOTE best 20 ms, 10 ms/scanline
kwi 26 16:42:14.77: [26871]: USE 9600 bit/s
kwi 26 16:42:14.77: [26871]: USE 20 ms, 10 ms/scanline
kwi 26 16:42:14.77: [26871]: SEND file "docq/doc106.ps;41"
kwi 26 16:42:14.77: [26871]: USE A4 page width (215 mm)
kwi 26 16:42:14.77: [26871]: USE unlimited page length
kwi 26 16:42:14.77: [26871]: USE 7.7 line/mm
kwi 26 16:42:14.77: [26871]: USE 2-D MR
kwi 26 16:42:14.77: [26871]: SEND training at v.29 9600 bit/s
kwi 26 16:42:14.77: [26871]: <-- [9:AT+FTH=3\r]
kwi 26 16:42:15.71: [26871]: --> [7:CONNECT]
kwi 26 16:42:15.71: [26871]: <-- data [23]
kwi 26 16:42:15.71: [26871]: <-- data [2]
kwi 26 16:42:15.73: [26871]: --> [7:CONNECT]
kwi 26 16:42:15.73: [26871]: <-- data [6]
kwi 26 16:42:15.73: [26871]: <-- data [2]
kwi 26 16:42:16.83: [26871]: --> [2:OK]
kwi 26 16:42:16.83: [26871]: <-- [9:AT+FTS=7\r]
kwi 26 16:42:16.91: [26871]: --> [2:OK]
kwi 26 16:42:16.91: [26871]: <-- [10:AT+FTM=96\r]
kwi 26 16:42:16.93: [26871]: --> [7:CONNECT]
kwi 26 16:42:16.93: [26871]: <-- data [1024]
kwi 26 16:42:16.93: [26871]: <-- data [776]
kwi 26 16:42:16.93: [26871]: <-- data [2]
kwi 26 16:42:18.72: [26871]: --> [2:OK]
kwi 26 16:42:18.72: [26871]: <-- [9:AT+FRH=3\r]
kwi 26 16:42:19.22: [26871]: --> [7:CONNECT]
kwi 26 16:42:20.45: [26871]: --> [2:OK]
kwi 26 16:42:20.45: [26871]: TRAINING succeeded
kwi 26 16:42:20.45: [26871]: DELAY 200 ms
kwi 26 16:42:20.65: [26871]: <-- [10:AT+FTM=96\r]
kwi 26 16:42:20.74: [26871]: --> [7:CONNECT]
kwi 26 16:42:20.74: [26871]: SEND begin page
kwi 26 16:42:20.74: [26871]: <-- data [1030]
kwi 26 16:42:20.74: [26871]: <-- data [1027]
kwi 26 16:42:20.74: [26871]: <-- data [1026]
kwi 26 16:42:20.74: [26871]: <-- data [1028]
kwi 26 16:42:20.74: [26871]: <-- data [1026]
kwi 26 16:42:22.74: [26871]: <-- data [1030]
kwi 26 16:42:22.74: [26871]: <-- data [1029]
kwi 26 16:42:22.74: [26871]: <-- data [1028]
kwi 26 16:42:24.73: [26871]: <-- data [1029]
kwi 26 16:42:24.73: [26871]: <-- data [1026]
kwi 26 16:42:24.73: [26871]: <-- data [1030]
kwi 26 16:42:24.73: [26871]: <-- data [1029]
kwi 26 16:42:26.73: [26871]: <-- data [902]
kwi 26 16:42:26.73: [26871]: SENT 13184 bytes of data
kwi 26 16:42:26.73: [26871]: SEND 2D RTC
kwi 26 16:42:26.73: [26871]: <-- data [30]
kwi 26 16:42:26.73: [26871]: <-- data [2]
kwi 26 16:42:26.73: [26871]: SEND end page
kwi 26 16:42:30.00: [26871]: --> [2:OK]
kwi 26 16:42:30.00: [26871]: <-- [9:AT+FTS=9\r]
kwi 26 16:42:30.11: [26871]: --> [2:OK]
kwi 26 16:42:30.11: [26871]: SEND send EOP (no more pages or documents)
kwi 26 16:42:30.11: [26871]: <-- [9:AT+FTH=3\r]
kwi 26 16:42:30.97: [26871]: --> [7:CONNECT]
kwi 26 16:42:30.97: [26871]: <-- data [3]
kwi 26 16:42:30.97: [26871]: <-- data [2]
kwi 26 16:42:31.29: [26871]: --> [2:OK]
kwi 26 16:42:31.29: [26871]: <-- [9:AT+FRH=3\r]
kwi 26 16:42:31.86: [26871]: --> [7:CONNECT]
kwi 26 16:42:33.08: [26871]: --> [2:OK]
kwi 26 16:42:33.08: [26871]: SEND recv MCF (message confirmation)
kwi 26 16:42:33.09: [26871]: SEND FAX (000000233): FROM arekm@something TO 5840924 (page 1 of 1 sent in 0:19)
kwi 26 16:42:33.09: [26871]: <-- [9:AT+FRS=7\r]
kwi 26 16:42:33.24: [26871]: --> [2:OK]
kwi 26 16:42:33.24: [26871]: SEND FAX (000000233): FROM arekm@something TO 5840924 (docq/doc106.ps;41 sent in 0:19)
kwi 26 16:42:34.09: [26871]: <-- [9:AT+FTH=3\r]
kwi 26 16:42:34.96: [26871]: --> [7:CONNECT]
kwi 26 16:42:34.96: [26871]: <-- data [3]
kwi 26 16:42:34.96: [26871]: <-- data [2]
kwi 26 16:42:35.28: [26871]: --> [2:OK]
kwi 26 16:42:35.28: [26871]: <-- [5:ATH0\r]
kwi 26 16:42:36.41: [26871]: --> [2:OK]
kwi 26 16:42:36.41: [26871]: SESSION END
Thanks,
--
Arkadiusz Miśkiewicz PLD/Linux Team
http://www.t17.ds.pwr.wroc.pl/~misiek/ http://ftp.pld-linux.org/
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
