Re: [hylafax-users] can send but cant receive

[-CDRW- <cdrw.fedora@xxxxxxxxx>]

Hi Lee I dont know the modem chipset, how can I know?
I havent the modem manuals :( any idea?

Today I tested the whcf to send a fax to hylafax and the reply was:
Busy signal detected. any sugestion?

thx very much

2005/4/15, Lee Howard <faxguy@xxxxxxxxxxxxxxxx>:
> Wow, another Davicom modem.  I had a 33.6 Davicom modem once (maybe I
> still do in my drawer full of ISA modems), but it only did Class 2.  I'm
> sure that the chipset was different.
> 
> Is the chipset on the modem also Davicom?
> 
> When you run faxaddmodem it's not going to pick up a prototype so you're
> going to need to make your own.
> 
> Anyway, as far as the blacklisting, you'll need to read the modem manual
> about how to manipulate that.
> 
> Lee.
> 
> 
> -CDRW- wrote:
> 
> >Ok, Giulioo now I paste the probemodem reply:
> >
> >Probing for best speed to talk to modem: 38400 OK.
> >
> >This looks like a Class 1 modem.
> >
> >ATI0    RESULT = "OK"   RESPONSE = "560"
> >ATI1    RESULT = "OK"   RESPONSE = "V3.00"
> >ATI2    RESULT = "OK"   RESPONSE = "TEST OK"
> >ATI3    RESULT = "OK"   RESPONSE = "DAVICOM V.90
> >DATA/FAX/VOICE/SPEAKERPHONE MOD EM,Ver:1.02H"
> >ATI4    RESULT = "OK"   RESPONSE = "DAVICOM
> >V.90/V.34+/FAX/VOICE/SPEAKERPHONE MO DEM, Date: 2000-07-11A"
> >ATI5    RESULT = "OK"   RESPONSE = "OK"
> >ATI6    RESULT = "OK"   RESPONSE = "OK"
> >ATI7    RESULT = "OK"   RESPONSE = "CTR-21 VERSION"
> >ATI8    RESULT = "OK"   RESPONSE = "OK"
> >ATI9    RESULT = "OK"   RESPONSE = "OK"
> >
> >Class 1 stuff...
> >
> >AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,8"
> >AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
> >AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
> >AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
> >AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
> >AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
> >AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
> >AT+FAA=?        RESULT = "ERROR"        RESPONSE = "ERROR"
> >AT+FAA? RESULT = "ERROR"        RESPONSE = "ERROR"
> >AT+FAE=?        RESULT = "ERROR"        RESPONSE = "ERROR"
> >AT+FAE? RESULT = "ERROR"        RESPONSE = "ERROR"
> >AT+FTH=?        RESULT = "OK"   RESPONSE = "3"
> >AT+FRH=?        RESULT = "OK"   RESPONSE = "3"
> >AT+FTM=?        RESULT = "OK"   RESPONSE =
> >"24,48,72,73,74,96,97,98,121,122,145, 146"
> >AT+FRM=?        RESULT = "OK"   RESPONSE =
> >"24,48,72,73,74,96,97,98,121,122,145, 146"
> >AT+FTS=?        RESULT = "OK"   RESPONSE = "3"
> >AT+FRS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
> >
> >its ok? thx very much
> >
> >2005/4/14, Giulio Orsero <giulioo@xxxxxxxxx>:
> >
> >
> >>On 4/14/05, -CDRW- <cdrw.fedora@xxxxxxxxx> wrote:
> >>
> >>
> >>>Hi, i hope us can help me...
> >>>Apr 14 11:57:54.28: [ 5403]: <-- [8:ATDT202\r]
> >>>Apr 14 11:57:54.59: [ 5403]: --> [11:BLACKLISTED]
> >>>Apr 14 11:57:54.59: [ 5403]: SEND FAILED: JOB 40 DEST 202 ERR
> >>>
> >>>
> >>Have you tried googling for "modem blacklisted"?
> >>
> >>"blacklist" is when you call too much a number which is not answering
> >>and then the modem refuses to call it again until a certain amount of
> >>time is elapsed.
> >>The modem is required to do it by some state regulations/laws.
> >>Just switch it off and then on.
> >>You can disable this modem "feature", but since every chipset has
> >>different ways to do it, you should post output of
> >>probemodem ttyS0
> >>so we undertand what kind of modem you have.
> >>"bestbuy modem" is not enough.
> >>
> >>--
> >>giulioo@xxxxxxxxx
> >>
> >>____________________ HylaFAX(tm) Users Mailing List _______________________
> >>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> >>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> >>
> >>
> >>
> >>
> >
> >____________________ HylaFAX(tm) Users Mailing List _______________________
> >  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> >  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> >
> >
> >
> 
>

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*