|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Fw: can send but cant receive
check the hylafax config file and edit the max concurrent faxes entry. it
defaults to 1.
-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of -CDRW-
Sent: Thursday, April 14, 2005 9:20 AM
To: hylafax
Subject: [hylafax-users] Fw: can send but cant receive
yes i can send trough cypheus or through sendfax to other faxes but when i
send a fax to the server the reply is blocked by the concurrent and 3 trys
later the reply is blacklisted by modem. When i execute faxstat -s i can
see
the fax with blacklisted by modem but when i execute faxstat -r is empty.
some ideas?
Yes i have the faxgetty in inittab levels 2345
thx vitor and sorry my bad english i hope u can understand me.
> ----- Original Message -----
> From: "Vitor Flausino" <vflausino@xxxxxxxxxxxx>
> To: "-CDRW-" <cdrw.fedora@xxxxxxxxx>; <hylafax-users@xxxxxxxxxxx>
> Sent: Thursday, April 14, 2005 12:40 PM
> Subject: Re: [hylafax-users] can send but cant receive
>
>
>> So you can send but can receive? hummm...
>> Does your box answer? In your /etc/inittab, is faxgetty enabled?
>>
>> -vcf
>> -CDRW- wrote:
>>
>>>Hi, i hope us can help me...
>>>
>>>First of all im going to tell my system, im runnig Hylafax 4.2.1 on
>>>Fedora Core 3 with a BestBuy Modem
>>>
>>>My ttyS0 configuration is:
>>>Generic Class 1 modem configuration
>>>CountryCode: 34
>>>AreaCode: 968
>>>FAXNumber: 201
>>>LongDistancePrefix: 0
>>>InternationalPrefix: 00
>>>DialStringRules: etc/dialrules.europe
>>>ServerTracing: 1
>>>SessionTracing: 0x4f
>>>RecvFileMode: 0644
>>>LogFileMode: 0644
>>>DeviceMode: 0666
>>>RingsBeforeAnswer: 1
>>>SpeakerVolume: off
>>>GettyArgs: "-r -b -s %s %1"
>>>LocalIdentifier: Empresa
>>>TagLineFont: etc/lutRS18.pcf
>>>TagLineFormat: "From %%l|%c|Page %%P of %%T"
>>>QualifyTSI: etc/tsi
>>>MaxRecvPages: 25
>>># Modem-related stuff: should reflect modem command interface
>>># and hardware connection/cabling (e.g. flow control).
>>>ModemType: Class1 # use this to supply a hint
>>>ModemRate: 19200 # rate for DCE-DTE communication
>>>#ModemFlowControl: xoff/xon # XON/XOFF flow control assumed#
>>>#ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
>>>#ModemSetupDCDCmd: AT&C1 # setup so DCD follows carrier
>>>#GettyArgs: "-h %l dx_%s" # modem must auto-detect fax/data
>>>
>>>Class1Cmd: AT+FCLASS=1 # command to enter class 1
>>>Class1PPMWaitCmd: AT+FTS=7 # command to stop and wait before
>>>PPM
>>>Class1TCFWaitCmd: AT+FTS=7 # command to stop and wait before
>>>TCF
>>>Class1EOPWaitCmd: AT+FTS=9 # command to stop and wait before
>>>EOP
>>>Class1MsgRecvHackCmd: "" # command to avoid +FCERROR before image
>>>Class1TCFResponseDelay: 75 # 75ms delay between recv TCF &
>>>response
>>>Class1SendMsgDelay: 200 # 75ms delay after training
>>>Class1SwitchingCmd: AT+FRS=7 # silence between HDLC recv and
>>>trans
>>>Class1TrainingRecovery: 1500 # 1.5sec delay after training
>>>failure
>>>Class1RecvAbortOK: 200 # wait 200ms for abort response
>>>Class1FrameOverhead: 4 # 4 byte overhead in recvd HDLC
>>>frames
>>>Class1RecvIdentTimer: 40000 # 35+5secs waiting for ident
>>>frames
>>>Class1TCFMaxNonZero: 10 # max 10% of data may be non-zero
>>>Class1TCFMinRun: 1000 # min run is 2/3rds of TCF
>>>duration
>>>
>>>the rest are #
>>>
>>>First times i reply it the faxstat reply was Blocked by concurrent
>>>call, but later of 3 trys the reply was:
>>>
>>>[ 5403]: SESSION BEGIN 000000101 34968202
>>>Apr 14 11:57:53.98: [ 5403]: HylaFAX (tm) Version 4.2.1
>>>Apr 14 11:57:53.98: [ 5403]: SEND FAX: JOB 40 DEST 202 COMMID
>>>000000101 DEVICE '/dev/ttyS0'
>>>Apr 14 11:57:53.98: [ 5403]: MODEM input buffering enabled
>>>Apr 14 11:57:53.98: [ 5403]: <-- [12:AT+FCLASS=1\r]
>>>Apr 14 11:57:54.28: [ 5403]: --> [2:OK]
>>>Apr 14 11:57:54.28: [ 5403]: MODEM set XON/XOFF/FLUSH: input ignored,
>>>output disabled
>>>Apr 14 11:57:54.28: [ 5403]: DIAL 202
>>>Apr 14 11:57:54.28: [ 5403]: <-- [8:ATDT202\r]
>>>Apr 14 11:57:54.59: [ 5403]: --> [11:BLACKLISTED]
>>>Apr 14 11:57:54.59: [ 5403]: SEND FAILED: JOB 40 DEST 202 ERR
>>>Blacklisted by modem
>>>Apr 14 11:57:54.59: [ 5403]: <-- [5:ATH0\r]
>>>Apr 14 11:57:54.88: [ 5403]: --> [2:OK]
>>>Apr 14 11:57:54.88: [ 5403]: MODEM set DTR OFF
>>>Apr 14 11:57:54.88: [ 5403]: SESSION END
>>>
>>>can anyone help me?
>>>thx very much and sorry for my bad english :)
>>>
>>>____________________ HylaFAX(tm) Users Mailing List
>>>_______________________
>>> To subscribe/unsubscribe, click
>>> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>>> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
>>> /dev/null
>>> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>>>
>>>
>>>
>>>
>>
>>
>
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
