Re: [hylafax-users] Fw: can send but cant receive

["-CDRW-" <cdrw.fedora@xxxxxxxxx>]

Default = 1, ok? but i cant recieve the first, you understand me?

What config file you refered?? and what is the max concurent faxes entry 
parameter?

thx very much

----- Original Message ----- 
From: "Chris Giesel" <cgiesel@xxxxxxxxxx>
To: "-CDRW-" <cdrw.fedora@xxxxxxxxx>; "hylafax" <hylafax-users@xxxxxxxxxxx>
Sent: Thursday, April 14, 2005 3:29 PM
Subject: RE: [hylafax-users] Fw: can send but cant receive


> check the hylafax config file and edit the max concurrent faxes entry. it
> defaults to 1.
>
> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx
> [mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of -CDRW-
> Sent: Thursday, April 14, 2005 9:20 AM
> To: hylafax
> Subject: [hylafax-users] Fw: can send but cant receive
>
>
>
> yes i can send trough cypheus or through sendfax to other faxes but when i
> send a fax to the server the reply is blocked by the concurrent and 3 trys
> later the reply is blacklisted by modem. When i execute faxstat -s i can
> see
> the fax with blacklisted by modem but when i execute faxstat -r is empty.
> some ideas?
>
> Yes i have the faxgetty in inittab levels 2345
>
> thx vitor and sorry my bad english i hope u can understand me.
>
> > ----- Original Message -----
> > From: "Vitor Flausino" <vflausino@xxxxxxxxxxxx>
> > To: "-CDRW-" <cdrw.fedora@xxxxxxxxx>; <hylafax-users@xxxxxxxxxxx>
> > Sent: Thursday, April 14, 2005 12:40 PM
> > Subject: Re: [hylafax-users] can send but cant receive
> >
> >
> > > So you can send but can receive? hummm...
> > > Does your box answer? In your /etc/inittab, is faxgetty enabled?
> > >
> > > -vcf
> > > -CDRW- wrote:
> > >
> > > > Hi, i hope us can help me...
> > > >
> > > > First of all im going to tell my system, im runnig Hylafax 4.2.1 on
> > > > Fedora Core 3 with a BestBuy Modem
> > > >
> > > > My ttyS0 configuration is:
> > > > Generic Class 1 modem configuration
> > > > CountryCode:            34
> > > > AreaCode:               968
> > > > FAXNumber:              201
> > > > LongDistancePrefix:     0
> > > > InternationalPrefix:    00
> > > > DialStringRules:        etc/dialrules.europe
> > > > ServerTracing:          1
> > > > SessionTracing:         0x4f
> > > > RecvFileMode:           0644
> > > > LogFileMode:            0644
> > > > DeviceMode:             0666
> > > > RingsBeforeAnswer:      1
> > > > SpeakerVolume:          off
> > > > GettyArgs:              "-r -b -s %s %1"
> > > > LocalIdentifier:        Empresa
> > > > TagLineFont:            etc/lutRS18.pcf
> > > > TagLineFormat:          "From %%l|%c|Page %%P of %%T"
> > > > QualifyTSI:             etc/tsi
> > > > MaxRecvPages:           25
> > > > # Modem-related stuff: should reflect modem command interface
> > > > # and hardware connection/cabling (e.g. flow control).
> > > > ModemType:              Class1          # use this to supply a hint
> > > > ModemRate:              19200           # rate for DCE-DTE communication
> > > > #ModemFlowControl:      xoff/xon        # XON/XOFF flow control assumed#
> > > > #ModemSetupDTRCmd:      AT&D2           # setup so DTR drop resets modem
> > > > #ModemSetupDCDCmd:      AT&C1           # setup so DCD follows carrier
> > > > #GettyArgs:             "-h %l dx_%s"   # modem must auto-detect 
> > > > fax/data
> > > >
> > > > Class1Cmd:              AT+FCLASS=1     # command to enter class 1
> > > > Class1PPMWaitCmd:       AT+FTS=7        # command to stop and wait 
> > > > before
> > > > PPM
> > > > Class1TCFWaitCmd:       AT+FTS=7        # command to stop and wait 
> > > > before
> > > > TCF
> > > > Class1EOPWaitCmd:       AT+FTS=9        # command to stop and wait 
> > > > before
> > > > EOP
> > > > Class1MsgRecvHackCmd:   ""      # command to avoid +FCERROR before image
> > > > Class1TCFResponseDelay: 75              # 75ms delay between recv TCF &
> > > > response
> > > > Class1SendMsgDelay:     200             # 75ms delay after training
> > > > Class1SwitchingCmd:     AT+FRS=7        # silence between HDLC recv and
> > > > trans
> > > > Class1TrainingRecovery: 1500            # 1.5sec delay after training
> > > > failure
> > > > Class1RecvAbortOK:      200             # wait 200ms for abort response
> > > > Class1FrameOverhead:    4               # 4 byte overhead in recvd HDLC
> > > > frames
> > > > Class1RecvIdentTimer:   40000           # 35+5secs waiting for ident
> > > > frames
> > > > Class1TCFMaxNonZero:    10              # max 10% of data may be 
> > > > non-zero
> > > > Class1TCFMinRun:        1000            # min run is 2/3rds of TCF
> > > > duration
> > > >
> > > > the rest are #
> > > >
> > > > First times i reply it the faxstat reply was Blocked by concurrent
> > > > call, but later of 3 trys the reply was:
> > > >
> > > > [ 5403]: SESSION BEGIN 000000101 34968202
> > > > Apr 14 11:57:53.98: [ 5403]: HylaFAX (tm) Version 4.2.1
> > > > Apr 14 11:57:53.98: [ 5403]: SEND FAX: JOB 40 DEST 202 COMMID
> > > > 000000101 DEVICE '/dev/ttyS0'
> > > > Apr 14 11:57:53.98: [ 5403]: MODEM input buffering enabled
> > > > Apr 14 11:57:53.98: [ 5403]: <-- [12:AT+FCLASS=1\r]
> > > > Apr 14 11:57:54.28: [ 5403]: --> [2:OK]
> > > > Apr 14 11:57:54.28: [ 5403]: MODEM set XON/XOFF/FLUSH: input ignored,
> > > > output disabled
> > > > Apr 14 11:57:54.28: [ 5403]: DIAL 202
> > > > Apr 14 11:57:54.28: [ 5403]: <-- [8:ATDT202\r]
> > > > Apr 14 11:57:54.59: [ 5403]: --> [11:BLACKLISTED]
> > > > Apr 14 11:57:54.59: [ 5403]: SEND FAILED: JOB 40 DEST 202 ERR
> > > > Blacklisted by modem
> > > > Apr 14 11:57:54.59: [ 5403]: <-- [5:ATH0\r]
> > > > Apr 14 11:57:54.88: [ 5403]: --> [2:OK]
> > > > Apr 14 11:57:54.88: [ 5403]: MODEM set DTR OFF
> > > > Apr 14 11:57:54.88: [ 5403]: SESSION END
> > > >
> > > > can anyone help me?
> > > > thx very much and sorry for my bad english :)
> > > >
> > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > _______________________
> > > >  To subscribe/unsubscribe, click
> > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > > > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
> > > > /dev/null
> > > >  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*