Re: [hylafax-users] Direct Inward Dialing (DID) with EICON cards

[kibeki@xxxxxxx]

Yes, we use a point to point port from the pbx.

You must create a file /var/spool/hylafax/etc/users, which looks like this:

peter.test@xxxxxxx   601
david.test@xxxxxxx   602
.....


Stefan-Michael. Guenther (in-put GbR) wrote:

> Hello Kib,
>
>  
>
> > we are using one Eicon Diva 4Bri with the following config.ttyds01 file:
> >
> > CountryCode:            49
> > AreaCode:               241
> > FAXNumber:              +49
> >
> >    
> and you then use the device ttyds01 in FaxDispatch to route the fax?
> Can you use more than one number on the device ttyds01 and still route the fax 
> according to the number that has been dialed?
>
> Stefan
>  

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*