Re: [hylafax-users] faxgetty doesn't answer

["Hector S. Mendoza Ortiz" <hector@xxxxxxxxxxxxxxxxxxx>]

Hello, just a report after several days of working with the hylafax server, 
I finally got it working without any interruptions.

I reported errors on Class2RELCmd and Class2APQueryCmd, on the logs from the 
faxes, I followed Lee´s instructions and everything has worked fine since.

Commented out Class2RELCmd  and added Class2APQueryCmd:       none to the 
config file and everything started working fine.

thanks to everybody for all the help!

Héctor



----- Original Message ----- 
From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
To: "Hector S. Mendoza Ortiz" <hector@xxxxxxxxxxxxxxxxxxx>
Cc: <hylafax-users@xxxxxxxxxxx>
Sent: Thursday, March 03, 2005 10:38 AM
Subject: Re: [hylafax-users] faxgetty doesn't answer


> Hector S. Mendoza Ortiz wrote:
>
> > On modem initialization, I see two error messages, could this be causing 
> > the modem to die?
> >
> > Mar  3 09:08:31 fax FaxGetty[7592]: <-- [9:AT+FAP=?\r]
> > Mar  3 09:08:31 fax FaxGetty[7592]: --> [5:ERROR]
> >
> > and
> >
> > Mar  3 09:08:31 fax FaxGetty[7592]: <-- [10:AT+FREL=1\r]
> > Mar  3 09:08:31 fax FaxGetty[7592]: --> [5:ERROR]
> >
> >
> > I found http://www.hylafax.org/FAQ/Q352.html so I assume that the +FAP is 
> > not an issue and on the FREL  I see this on probemodem
> >
> > AT+FREL=?       RESULT = "OK"   RESPONSE = "0"
> > AT+FREL?        RESULT = "OK"   RESPONSE = "0"
>
>
> In your modem config file set:
>
>  Class2APQueryCmd:  none
>
> And delete the Class2RELCmd that you have in your config file.
>
> Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*