Re: [hylafax-users] faxgetty doesn't answer

To: "Hector S. Mendoza Ortiz" <hector@xxxxxxxxxxxxxxxxxxx>, "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
Subject: Re: [hylafax-users] faxgetty doesn't answer
From: "Hector S. Mendoza Ortiz" <hector@xxxxxxxxxxxxxxxxxxx>
Cc: <hylafax-users@xxxxxxxxxxx>
Date: Thu, 3 Mar 2005 09:30:03 -0600

On modem initialization, I see two error messages, could this be causing the modem to die?

Mar  3 09:08:31 fax FaxGetty[7592]: <-- [9:AT+FAP=?\r]
Mar  3 09:08:31 fax FaxGetty[7592]: --> [5:ERROR]

and

Mar  3 09:08:31 fax FaxGetty[7592]: <-- [10:AT+FREL=1\r]
Mar  3 09:08:31 fax FaxGetty[7592]: --> [5:ERROR]

I found http://www.hylafax.org/FAQ/Q352.html so I assume that the +FAP is not an issue and on the FREL I see this on probemodem

AT+FREL=?       RESULT = "OK"   RESPONSE = "0"
AT+FREL?        RESULT = "OK"   RESPONSE = "0"

the complete log for modem initialization follows

Thanks for all the help

Héctor

Mar 3 09:08:21 fax init: Re-reading inittab Mar 3 09:08:21 fax FaxGetty[7592]: OPEN /dev/ttyS3 HylaFAX (tm) Version 4.2.1 Mar 3 09:08:22 fax FaxGetty[7592]: MODEM set DTR OFF Mar 3 09:08:22 fax FaxGetty[7592]: DELAY 75 ms Mar 3 09:08:22 fax FaxGetty[7592]: MODEM set DTR ON Mar 3 09:08:22 fax FaxGetty[7592]: DELAY 2600 ms Mar 3 09:08:26 fax FaxGetty[7592]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF Mar 3 09:08:26 fax FaxGetty[7592]: DELAY 10 ms Mar 3 09:08:26 fax FaxGetty[7592]: MODEM flush i/o Mar 3 09:08:26 fax FaxGetty[7592]: <-- [4:ATZ\r] Mar 3 09:08:26 fax FaxGetty[7592]: --> [3:ATZ] Mar 3 09:08:26 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:26 fax FaxGetty[7592]: DELAY 3000 ms Mar 3 09:08:29 fax FaxGetty[7592]: MODEM flush i/o Mar 3 09:08:29 fax FaxGetty[7592]: <-- [7:ATS0=0\r] Mar 3 09:08:29 fax FaxGetty[7592]: --> [6:ATS0=0] Mar 3 09:08:29 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:29 fax FaxGetty[7592]: <-- [5:ATE0\r] Mar 3 09:08:29 fax FaxGetty[7592]: --> [4:ATE0] Mar 3 09:08:29 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:29 fax FaxGetty[7592]: <-- [5:ATV1\r] Mar 3 09:08:29 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:29 fax FaxGetty[7592]: <-- [5:ATQ0\r] Mar 3 09:08:30 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:30 fax FaxGetty[7592]: <-- [7:ATS8=2\r] Mar 3 09:08:30 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:30 fax FaxGetty[7592]: <-- [8:ATS7=60\r] Mar 3 09:08:30 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:30 fax FaxGetty[7592]: <-- [12:AT+FCLASS=?\r] Mar 3 09:08:30 fax FaxGetty[7592]: --> [5:0,1,2] Mar 3 09:08:30 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports "Data" Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports "Class 1" Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports "Class 2" Mar 3 09:08:30 fax FaxGetty[7592]: <-- [12:AT+FCLASS=2\r] Mar 3 09:08:30 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:30 fax FaxGetty[7592]: <-- [9:AT+FMFR?\r] Mar 3 09:08:30 fax FaxGetty[7592]: --> [15:AEIGFM560LKNF1 ] Mar 3 09:08:30 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:30 fax FaxGetty[7592]: MODEM: Mfr AEIGFM560LKNF1 Mar 3 09:08:30 fax FaxGetty[7592]: <-- [9:AT+FMDL?\r] Mar 3 09:08:30 fax FaxGetty[7592]: --> [15:AEIGFM560LKNF1 ] Mar 3 09:08:30 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:30 fax FaxGetty[7592]: <-- [9:AT+FREV?\r] Mar 3 09:08:30 fax FaxGetty[7592]: --> [8:p052099f] Mar 3 09:08:30 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:30 fax FaxGetty[7592]: MODEM: Model AEIGFM560LKNF1 Mar 3 09:08:30 fax FaxGetty[7592]: MODEM: Revision p052099f Mar 3 09:08:30 fax FaxGetty[7592]: <-- [10:AT+FDCC=?\r] Mar 3 09:08:30 fax FaxGetty[7592]: --> [39:(0,1),(0-5),(0),(0-2),(0),(0),(0),(0-7)] Mar 3 09:08:30 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 3.85 line/mm Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 7.7 line/mm Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 2400 bit/s Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 4800 bit/s Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 7200 bit/s Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 9600 bit/s Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 12000 bit/s Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 14400 bit/s Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports A4 page width (215 mm) Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports A4 page length (297 mm) Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports B4 page length (364 mm) Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports unlimited page length Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 1-D MH Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 0 ms/scanline Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 5 ms/scanline Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 10 ms, 5 ms/scanline Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 10 ms/scanline Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 20 ms, 10 ms/scanline Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 20 ms/scanline Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 40 ms, 20 ms/scanline Mar 3 09:08:30 fax FaxGetty[7592]: MODEM Supports 40 ms/scanline Mar 3 09:08:30 fax FaxGetty[7592]: <-- [9:AT+FCQ=?\r] Mar 3 09:08:31 fax FaxGetty[7592]: --> [3:0-1] Mar 3 09:08:31 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:31 fax FaxGetty[7592]: MODEM Supports 1D copy quality checking (but not enabled) Mar 3 09:08:31 fax FaxGetty[7592]: <-- [9:AT+FAP=?\r] Mar 3 09:08:31 fax FaxGetty[7592]: --> [5:ERROR] Mar 3 09:08:31 fax FaxGetty[7592]: <-- [10:AT+FSPL=?\r] Mar 3 09:08:31 fax FaxGetty[7592]: --> [3:0,1] Mar 3 09:08:31 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:31 fax FaxGetty[7592]: <-- [10:AT+FTBC=0\r] Mar 3 09:08:31 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:31 fax FaxGetty[7592]: <-- [10:AT+FBOR=0\r] Mar 3 09:08:31 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:31 fax FaxGetty[7592]: <-- [13:AT+FPHCTO=30\r] Mar 3 09:08:31 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:31 fax FaxGetty[7592]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r] Mar 3 09:08:31 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:31 fax FaxGetty[7592]: MODEM AEIGFM560LKNF1 AEIGFM560LKNF1/p052099f Mar 3 09:08:31 fax FaxGetty[7592]: <-- [5:ATM0\r] Mar 3 09:08:31 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:31 fax FaxGetty[7592]: <-- [31:AT+FLID="Asesoria Corporativa"\r] Mar 3 09:08:31 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:31 fax FaxGetty[7592]: <-- [10:AT+FREL=1\r] Mar 3 09:08:31 fax FaxGetty[7592]: --> [5:ERROR] Mar 3 09:08:31 fax FaxGetty[7592]: MODEM Command error Mar 3 09:08:31 fax FaxGetty[7592]: <-- [9:AT+FCR=1\r] Mar 3 09:08:32 fax FaxGetty[7592]: --> [2:OK] Mar 3 09:08:32 fax FaxGetty[7592]: STATE CHANGE: BASE -> RUNNING (timeout 30) Mar 3 09:08:32 fax FaxGetty[7592]: MODEM input buffering disabled

----- Original Message ----- From: "Hector S. Mendoza Ortiz" <hector@xxxxxxxxxxxxxxxxxxx> To: "Hector S. Mendoza Ortiz" <hector@xxxxxxxxxxxxxxxxxxx>; "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx> Cc: <hylafax-users@xxxxxxxxxxx> Sent: Thursday, March 03, 2005 9:07 AM Subject: Re: [hylafax-users] faxgetty doesn't answer

Hello all....

After 24 hours of running with out touching it, modem it's still ok, and presents no problems, so I'm assuming that there is no linux issue with it, and the issue is due to faxgetty I will put it to run again faxgetty and keep an eye on it for a while to see what happens

Héctor


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Follow-Ups:
- Re: [hylafax-users] faxgetty doesn't answer
  - From: Lee Howard

References:
- [hylafax-users] faxgetty doesn't answer
  - From: Hector S. Mendoza Ortiz
- Re: [hylafax-users] faxgetty doesn't answer
  - From: Lee Howard
- Re: [hylafax-users] faxgetty doesn't answer
  - From: Hector S. Mendoza Ortiz
- Re: [hylafax-users] faxgetty doesn't answer
  - From: Lee Howard
- Re: [hylafax-users] faxgetty doesn't answer
  - From: Hector S. Mendoza Ortiz
- Re: [hylafax-users] faxgetty doesn't answer
  - From: Hector S. Mendoza Ortiz

Prev by Date: Re: [hylafax-users] faxgetty doesn't answer
Next by Date: [hylafax-users] R: R: delete tiff after received and order by tim est amp.
Previous by thread: Re: [hylafax-users] faxgetty doesn't answer
Next by thread: Re: [hylafax-users] faxgetty doesn't answer
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services