Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] MultiTech MT5634ZPX-PCI-V92 and Wedging





On 2005.02.18 12:11 Mike McMullen wrote:

Hi Lee/Bill and all other interested parties,

One of the modems wedged this morning
....
So I had to remove the
phone lines, reboot and everything was back to normal.

Yeah, that's how you have to power-cycle PCI cards. I wonder if simply unloading and then reloading the serial driver (if it's a module) would do the trick. Not like that should matter, though.


An incoming fax attempt failed about 5 times before the modem wedged.

Did it fail in exactly the same way? (+FCERROR after CTR)


After the
last failed attempt it appears the modem wedged. I've attached the com log if that can provide any help.

It looks like the modem was responsive throughout the session, however. So the point when it hung would have been in your syslog if you have ServerTracing set to 0xFFF.


Lee.

Lee/Steve, thank you for your responses. I'll set the ServerTracing to 0xFFF as
you suggested Lee and wait for the next time it happens.

Thanks!

Mike


____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services