[hylafax-users] problems with SuSE 9.1 / hylafax 4.1.8 / libtiff 3.6.1 / gcc 3.3.3

[Swantje & Michael Ludwig <listuser@xxxxxxxxxxxxxxxxxxx>]

Hello to all of you,

I am new to this list and relatively new to hylafax at all - so please
don't smack me if I write some sort of scrap here. ;-)
Please forgive me also if my english is way bad, I'm just totally right
out of it. ;-)

First of all - my system config looks like this:
- Linux Distribution SuSE 9.1
  (Linux stargate 2.6.5-7.111.30-default #1 Fri Jan 14 12:58:46
   UTC 2005 i686 i686 i386 GNU/Linux)
- all packages from the SuSE CDs and updates via YOU
- ISDN card AVM Fritz! PCI (v1 I think)
- hylafax version 4.1.8-24.4
- capi4hylafax 4.1.8-24.2
- avmfritzcapi 2.6-26
- libtiff 3.6.1-38.14
- gcc 3.3.3-41


Here we go - my problem: ;-)

I use hylafax since half a year now, let's say all-in-all at a good
level of satisfaction.
Till now I used hylafax with only one MSN, so that there were nearly
no problems while using it.

Now it came to the time that I need one more faxnumber to send and
receive from.
So what I did to get hylafax to know the second MSN is that I added
a new configuration block in the file /var/spool/fax/etc/config.faxCAPI.
I added some new clients in the file hosts.hfaxd and added the
email-address and the MSN in the users-file.

Now when I call faxstat I only get to see the new faxnumber I entered
in the new block of the config file.

===============================================================
stargate:/var/spool/fax/etc #
stargate:/var/spool/fax/etc # faxstat
HylaFAX scheduler on stargate.swami.net: Running
Modem faxCAPI (+49.4xyz.1234567): Running and idle
stargate:/var/spool/fax/etc #
===============================================================


When I manually call c2faxrecv (which already runs called
via inittab) then I can see the two MSNs:
===============================================================
stargate:/var/spool/fax/etc #
stargate:/var/spool/fax/etc # c2faxrecv -v

Device "faxCAPI" uses 2 receive thread(s) with the following config:
Controller=1 : IncomingMSNs=24

Device "faxCAPI2" uses 2 receive thread(s) with the following config:
Controller=1 : IncomingMSNs=22

Started in Hylafax mode and waiting on incoming calls.

stargate:/var/spool/fax/etc #
===============================================================


Now I will explain where I have my difficulties.

First of all, sending a fax with sendfax (on the server console) works
fine, but trying to send a fax with WHFC from a windows client (same
applies for a SuSE client with susefax) results in this log message and
no dialing or accessing the CAPI interface at all:

(avmcapitrace ON)
===============================================================
Jan 31 17:18:36 stargate kernel: kcapi: contr 1 set trace=4
Jan 31 17:44:31 stargate HylaFAX[19451]: Filesystem has SysV-style file 
creation semantics.
Jan 31 17:44:31 stargate FaxQueuer[19319]: SUBMIT JOB 34
Jan 31 17:44:31 stargate FaxQueuer[19319]: NOTIFY: bin/notify 
"doneq/q34" "done" "0:00"
Jan 31 17:44:31 stargate exim[19457]: 2005-01-31 17:44:31 
1Cvef9-00053p-QH <= fax@xxxxxxxxxxxxxxxxxxx U=fax P=local S=832 
T="facsimile job 34 to 11 completed"
Jan 31 17:44:32 stargate exim[19458]: 2005-01-31 17:44:32 
1Cvef9-00053p-QH => michi <michi@xxxxxxxxxxxxxxxxxxx> R=localuser 
T=local_delivery
Jan 31 17:44:32 stargate exim[19458]: 2005-01-31 17:44:32 
1Cvef9-00053p-QH Completed
Jan 31 17:44:55 stargate kernel: kcapi: contr 1 set trace=0
===============================================================

So no dialing at all happens nor does the system at all tries to
activate the capi or whatever should happen at this point. ;-)
So this is my first problem, and is the biggest one.
Please help, I don't get along on my own with this. ;-(


My second problem is hopefully easier to solve, maybe just a
logical error of me... ;-)
--> How can I tell hylafax to use MSN A (24) or MSN B (22)
whilst sending out a fax??
I didn't find any useful informations at all on the net while
searching for keywords regarding hylafax and more than one MSN.

So I would really appreciate it if someone could point me to
a solution here, too. ;-)


Sorry for this long posting, but I just didn't manage to get
it shorter. ;-)

Thanx for reading and any eventual answers! ;-)

Michael




____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*