[hylafax-users] FW: Problems with faxdispatch

["Michael Alexander" <hylafax@xxxxxxxxxxxxxxxxxx>]

Now it doesn't route anywhere... The log shows routed to:<unspecified>

I tried just the last case, and I tried it in both of them, same result.

-Mike

> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx 
> [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Tony S. Sykes
> Sent: Tuesday, January 18, 2005 4:58 AM
> To: Michael Alexander
> Cc: HylaFax (E-mail)
> Subject: Re: [hylafax-users] Problems with faxdispatch
> 
> 
> Remove the sendto master at the top and put it before the 
> last sendto before the esac with an *) to pick up any other entry.
> 
> > FILETYPE=pdf;
> > # MIMENCODE=bin/uuencode_it;
> > #SENDTO=master@xxxxxx;
> > #
> > case "$DEVICE" in
> > ttyS0) SENDTO=faxes@xxxxxx;;
> > ttyS14) SENDTO=me@xxxxxx;;
> > esac
> > #
> > case "$SENDER" in
> > *609*858*6470*)		SENDTO=me@xxxxxx;;
> > *609*858*6418*)		SENDTO=me@xxxxxx;;
> > *609*858*1323*)		SENDTO=me@xxxxxx;;
> > *1798*)	SENDTO=other@xxxxxx;;
> *)	SENDTO=master@xxxxxx;;
> > esac
> 
> > -----Original Message-----
> > From: hylafax-users-bounce@xxxxxxxxxxx
> > [mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Michael 
> > Alexander
> > Sent: Monday, January 17, 2005 10:25 PM
> > To: hylafax-users@xxxxxxxxxxx
> > Subject: [hylafax-users] Problems with faxdispatch
> > 
> > 
> > Hi,
> >   (Hylafax 4.2.1 on suse enterprise server 9)
> >   I have some problems with FaxDispatch changing routings of 
> > incoming faxes.
> > I have the following entries (specific numbers and e-mail 
> > addresses changed)
> > 
> > FILETYPE=pdf;
> > # MIMENCODE=bin/uuencode_it;
> > SENDTO=master@xxxxxx;
> > #
> > case "$DEVICE" in
> > ttyS0) SENDTO=faxes@xxxxxx;;
> > ttyS14) SENDTO=me@xxxxxx;;
> > esac
> > #
> > case "$SENDER" in
> > *609*858*6470*)		SENDTO=me@xxxxxx;;
> > *609*858*6418*)		SENDTO=me@xxxxxx;;
> > *609*858*1323*)		SENDTO=me@xxxxxx;;
> > *1798*)	SENDTO=other@xxxxxx;;
> > esac
> > 
> > 
> > I successfully get a PDFs but they are all delivered to 
> > master@xxxxxxx  Here
> > is the text of the test that came to master:
> >     Sender: 1798
> >      Pages: 1
> >    Quality: Normal
> >       Page: North American Letter
> >   Received: 2005:01:17 16:01:56
> > TimeToRecv: 0:24
> > SignalRate: 14400 bit/s
> > DataFormat: 1-D MH
> > ErrCorrect: No
> > ReceivedOn: ttyS14
> >     CommID: c000000018
> > 
> > From that it should go to other correct? Because the last 
> > case statement
> > says anything from sender= 1798 goes to other@xxxxxxx  That 
> > overrides the
> > ttyS14 going to me@xxxxxx, which would override the master@xxxxxx?
> > 
> > Changing the filetype entry works as well as the first 
> > SENDTO, so I know
> > that faxdispatch is getting processed.  That would point to a 
> > failing in the
> > case statements, how can I see exactly where it is failing and why?
> > 
> > Thanks,
> > Mike


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*