|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Failed to properly detect high-speed data carrier
On 2005.01.12 03:30 Thijs wrote:
Jan 12 10:31:41.14: [ 3215]: RECV: TCF 2935 bytes, 7% non-zero, 1586
zero-run
Jan 12 10:31:41.14: [ 3215]: RECV: reject TCF (zero run too short, min
1800)
Jan 12 10:31:44.93: [ 3215]: RECV training at v.17 12000 bit/s
Jan 12 10:31:44.93: [ 3215]: <-- [11:AT+FRM=121\r]
Jan 12 10:31:46.34: [ 3215]: --> [7:CONNECT]
Jan 12 10:31:47.98: [ 3215]: RECV: TCF 2451 bytes, 7% non-zero, 1545
zero-run
Jan 12 10:31:49.33: [ 3215]: <-- [11:AT+FRM=122\r]
Jan 12 10:31:50.06: [ 3215]: --> [7:CONNECT]
Jan 12 10:31:50.76: [ 3215]: HDLC frame not byte-oriented. Trailing
byte: 0xe0
Jan 12 10:31:51.21: [ 3215]: Bad HDLC terminating flag received.
Jan 12 10:31:53.62: [ 3215]: RECV frame FCS check failed
Jan 12 10:31:53.80: [ 3215]: RECV frame FCS check failed
Well, first of all, it looks like your connection is fairly noisy. So
nothing may have changed to the modem configuration or the modem, but
did something change with the phone line?
Jan 12 10:31:57.72: [ 3215]: RECV send PPR (partial page request)
Jan 12 10:31:57.72: [ 3215]: <-- [11:AT+FRM=122\r]
Jan 12 10:31:57.84: [ 3215]: --> [5:ERROR]
This indicates that the modem was disconnected. Meaning something
happened to make the modem hang up the line.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
