|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] fax with errors but no error message in log file...
That is a completely normal fax session. Nothing wrong at all.
If you are missing lines then maybe it was the fax machine at the other
end not scanning them in properly.
You can try to increase the tracing level in config.faxCapi but all that
is going to do is give you more detail. There are no errors here.
With an active card there's not much you can really do but make sure you
have the latest and best firmware as all fax transmission is done in the
firmware.
Stefania Sella wrote:
Hi everyone,
I installed a faxserver HylaFAX with AVM Controller C4.
This is my configuration:
OS Linux SuSE 7.3
HylaFAX: 4.1.2
capi driver: 3.11-04 (49.20)
capi4hylafax: 01.01.02
I update the firmware: 3.17-04 (49.20)
I receive the fax with errors ( some lines are absent) but with fax log
file without error messages.
This is the corresponding log file:
Dec 27 16:31:47.42: [29096]: SESSION BEGIN 00008013 +39050572725
Dec 27 16:31:47.42: [29096]: Incoming fax call from 3486024089 to 50572725.
Dec 27 16:31:57.96: [29096]: Connection established to Receive ID
'3486024089 ' with 9600 bit/s.
Dec 27 16:31:57.96: [29096]: Write fax to file recvq/fax03641.tif.
Dec 27 16:55:43.38: [29096]: Fax received and calling
'/var/spool/fax/bin/faxrcvd "recvq/fax03641.tif" "faxCAPI0" "00008013" ""'.
Dec 27 16:55:44.46: [29096]: Connection is droped with reason 0x3400 (No
additional information).
Dec 27 16:55:44.46: [29096]: SESSION END
No error-msg and the fax call finishes normally.
What is the problem?
Excuse me for the question...
Thank you for your availability.
Regards,
Stefania
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
