Re: [hylafax-users] COMREC Recieved DCN

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2004.12.20 11:52 hylafax-users@xxxxxxxxxxx wrote:
> Here is an example of the other problem I have with hylafax an
> Multitiech
> cards.
>
> I have a Multitech ISI5634PCI/8 card and Hylafax 4.2.0

> Dec 20 10:41:05.76: [26863]: <-- [9:AT+FRH=3\r]
> Dec 20 10:41:06.28: [26863]: --> [7:CONNECT]
> Dec 20 10:41:11.28: [26863]: MODEM TIMEOUT: receiving HDLC frame data
> Dec 20 10:41:11.33: [26863]: --> [2:]
> Dec 20 10:41:11.33: [26863]: --> [2:OK]
> Dec 20 10:41:11.33: [26863]: RECV keeping unconfirmed page

Firstly, the log that you sent indicates a large amount of data 
corruption is occuring somewhere between the sender's DTE and HylaFAX.  
Meaning that the real culprit is probably the connection.  There must 
be some kind of interference.

Secondly, the reason that the session failed is because the modem did 
not detect a message from the sender as expected.  There may be 
possible workarounds, or improvements that could be made, but after 5 
seconds of waiting, we're going to be out-of-sync with the sender, and 
generally speaking we'd be lucky to recover.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*