[hylafax-users] send failed, modem timeout?

["L. de Braal" <ldb@xxxxxxxx>]

Got this log:

Your facsimile job to 011xxxxxxx was not sent because:
    Unknown problem (check modem power)

The job will be retried at 11:23.

    ---- Transcript of session follows ----

Dec 06 11:15:33.16: [ 2760]: SESSION BEGIN 00000093 3101150115696410
Dec 06 11:15:33.16: [ 2760]: HylaFAX (tm) Version 4.1.8
Dec 06 11:15:33.16: [ 2760]: SEND FAX: JOB 8 DEST 011xxxxxxx COMMID
00000093 DEVICE
'/dev/ttyS0'
Dec 06 11:15:33.16: [ 2760]: MODEM set DTR OFF
Dec 06 11:15:33.16: [ 2760]: DELAY 75 ms
Dec 06 11:15:33.24: [ 2760]: MODEM set DTR ON
Dec 06 11:15:33.24: [ 2760]: DELAY 2600 ms
Dec 06 11:15:36.84: [ 2760]: MODEM set baud rate: 19200 baud, input flow
XON/XOFF,
output flow XON/XOFF
Dec 06 11:15:36.84: [ 2760]: DELAY 10 ms
Dec 06 11:15:36.85: [ 2760]: MODEM flush i/o
Dec 06 11:15:36.85: [ 2760]: <-- [4:ATZ\r]
Dec 06 11:15:36.94: [ 2760]: --> [2:OK]
Dec 06 11:15:36.94: [ 2760]: DELAY 3000 ms
Dec 06 11:15:39.93: [ 2760]: <-- [5:ATE0\r]
Dec 06 11:15:39.99: [ 2760]: --> [4:ATE0]
Dec 06 11:15:39.99: [ 2760]: --> [2:OK]
Dec 06 11:15:39.99: [ 2760]: <-- [5:ATV1\r]
Dec 06 11:15:40.05: [ 2760]: --> [2:OK]
Dec 06 11:15:40.05: [ 2760]: <-- [5:ATQ0\r]
Dec 06 11:15:40.11: [ 2760]: --> [2:OK]
Dec 06 11:15:40.11: [ 2760]: <-- [7:ATS0=0\r]
Dec 06 11:15:40.17: [ 2760]: --> [2:OK]
Dec 06 11:15:40.17: [ 2760]: <-- [7:ATS8=2\r]
Dec 06 11:15:40.23: [ 2760]: --> [2:OK]
Dec 06 11:15:40.23: [ 2760]: <-- [8:ATS7=60\r]
Dec 06 11:15:40.29: [ 2760]: --> [2:OK]
Dec 06 11:15:40.29: [ 2760]: <-- [12:AT+FCLASS=1\r]
Dec 06 11:15:40.35: [ 2760]: --> [2:OK]
Dec 06 11:15:40.35: [ 2760]: <-- [5:ATM0\r]
Dec 06 11:15:40.41: [ 2760]: --> [2:OK]
Dec 06 11:15:40.41: [ 2760]: STATE CHANGE: RUNNING -> SENDING
Dec 06 11:15:40.41: [ 2760]: MODEM input buffering enabled
Dec 06 11:15:40.41: [ 2760]: Apply DialString rules to "011xxxxxxx"
Dec 06 11:15:40.41: [ 2760]: --> return result "011xxxxxxx"
Dec 06 11:15:40.41: [ 2760]: <-- [12:AT+FCLASS=1\r]
Dec 06 11:15:40.57: [ 2760]: --> [2:OK]
Dec 06 11:15:40.57: [ 2760]: MODEM set XON/XOFF/FLUSH: input ignored,
output disabled
Dec 06 11:15:40.57: [ 2760]: DIAL 011xxxxxxx
Dec 06 11:15:40.57: [ 2760]: <-- [15:ATDT011xxxxxxx\r]
Dec 06 11:18:40.57: [ 2760]: MODEM TIMEOUT: reading line from modem
Dec 06 11:18:40.57: [ 2760]: SEND FAILED: JOB 8 DEST 011xxxxxxx ERR
Unknown problem
(check modem power)
Dec 06 11:18:40.57: [ 2760]: <-- [5:ATH0\r]
Dec 06 11:18:40.71: [ 2760]: --> [10:NO CARRIER]
Dec 06 11:18:40.71: [ 2760]: MODEM No carrier
Dec 06 11:18:40.71: [ 2760]: MODEM set DTR OFF
Dec 06 11:18:40.71: [ 2760]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Dec 06 11:18:40.71: [ 2760]: SESSION END


This is Suse9.1, kernel 2.6.5-7.111.5-default with Suse's hylafax
4.1.8-24.2. Modem is external, standard config.
What causes this error? So far not had any problems with sending faxes.

-- 
L. de Braal
BraHa Systems
NL Terneuzen
T +31 115 649333
F +31 115 649444

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*