Re: [hylafax-users] Unspecified Phase D error AND Ring detected without successful handshake !?

[Pedro Rocadas <procadas@xxxxxxxxx>]

For the record, this is the modem

http://www.zyxel.com/product/model.php?indexcate=1033374615&indexFlagvalue=1021876983

Right now I can't access the datasheet since I don't
have ftp permissions in our proxy but I'm waiting for
the document from a co-worker who has access.

Pedro

--- Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote:

> On 2004.10.20 07:06 Kónya Balázs wrote:
> 
> > Oct 20 03:56:55.47: [28263]: RECV: 24872 bytes of
> data, 2294 total
> > lines
> > Oct 20 03:56:56.76: [28263]: -->
> [16:+FPS:1,8F4,2,2,0]
> > Oct 20 03:56:56.76: [28263]: --> [6:+FET:0]
> 
> Notice how the modem reports both +FPS and +FET. 
> +FPS is the page 
> status.  It is generally reported by the modem when
> it gets the 
> end-of-page signals from the sender.  +FET is the
> post-page message.  
> It is reported by the modem when it receives it.
> 
> As a side note, notice how the line-count (8F4) is
> reported in 
> hexadecimal.  That's a notorious Zyxel trait.  (Not
> a problem, though.)
> 
> > Oct 20 03:56:56.76: [28263]: RECV recv MPS (more
> pages, same document)
> > Oct 20 03:56:56.76: [28263]: --> [2:OK]
> > Oct 20 03:56:56.76: [28263]: RECV send MCF
> (message confirmation)
> > Oct 20 03:56:56.76: [28263]: RECV FAX (000002178):
> from , page 1 in
> > 0:38,
> > INF, 7.7 line/mm, 2-D MR, 14400 bit/s
> > Oct 20 03:56:56.76: [28263]: <-- [7:AT+FDR\r]
> > Oct 20 03:56:59.02: [28263]: --> [7:CONNECT]
> > Oct 20 03:56:59.02: [28263]: RECV: begin page
> > Oct 20 03:56:59.02: [28263]: RECV: send trigger
> 022
> > Oct 20 03:56:59.02: [28263]: <-- data [1]
> > Oct 20 03:56:59.02: [28263]: Copy quality checking
> performed by modem
> > Oct 20 03:56:59.02: [28263]: RECV: 14 bytes of
> data, 4 total lines
> > Oct 20 03:57:09.62: [28263]: -->
> [14:+FPS:1,2,0,0,0]
> > Oct 20 03:57:09.62: [28263]: --> [7:+FHS:A0]
> > Oct 20 03:57:09.62: [28263]: REMOTE HANGUP:
> Unspecified Phase D error
> > (code
> > A0)
> > Oct 20 03:57:09.62: [28263]: --> [5:ERROR]
> 
> Notice that in this case the modem did not report
> +FET.  Notice also 
> that the line count was 2.  What does this mean? 
> Well, it means that 
> there was some kind of problem receiving the page
> image data.  I could 
> hypothesize as to what the problem is or was, but it
> would not enable 
> us to work around or fix the problem.  It looks to
> me that the problem 
> must come from either a bugfix on the sender or a
> firmware update from 
> Zyxel.
> 
> Does the modem support Class 1?  You'll fare much
> better with Class 1.
> 
> Lee.
> 
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe
> hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support,
> mail sales@xxxxxxxxx*
> 
> 



		
_______________________________
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http://vote.yahoo.com

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*