|
Report any problems to
webmaster@hylafax.org
HylaFAX is a trademark of Silicon Graphics Corporation. Internet connectivity for hylafax.org is provided by: VirtuALL Private Host Services |
| Hylafax Mailing List Archives |
|
Hi!
I get this error and black page after some received faxes.
Debian; Hylafax 4.2.0; Class; rtscts; 19200; (libtiff4-3.6.1-1.1)
Maybe is the problem with libtiff ??
The log:
Oct 20 03:56:08.85: [28263]: SESSION BEGIN 000002178 ******** Oct 20 03:56:08.85: [28263]: HylaFAX (tm) Version 4.2.0 Oct 20 03:56:08.85: [28263]: <-- [4:ATA\r] Oct 20 03:56:18.14: [28263]: --> [4:+FCO] Oct 20 03:56:18.14: [28263]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0' Oct 20 03:56:18.14: [28263]: sched policy=1, priority=1 Oct 20 03:56:18.14: [28263]: RECV FAX: begin Oct 20 03:56:18.14: [28263]: --> [20:+FCS:1,5,0,2,1,0,0,1] Oct 20 03:56:18.14: [28263]: REMOTE wants 14400 bit/s Oct 20 03:56:18.14: [28263]: REMOTE wants A4 page width (215 mm) Oct 20 03:56:18.14: [28263]: REMOTE wants unlimited page length Oct 20 03:56:18.14: [28263]: REMOTE wants 7.7 line/mm Oct 20 03:56:18.14: [28263]: REMOTE wants 2-D MR Oct 20 03:56:18.14: [28263]: --> [2:OK] Oct 20 03:56:18.14: [28263]: <-- [7:AT+FDR\r] Oct 20 03:56:23.43: [28263]: --> [20:+FCS:1,5,0,2,1,0,0,1] Oct 20 03:56:23.43: [28263]: REMOTE wants 14400 bit/s Oct 20 03:56:23.43: [28263]: REMOTE wants A4 page width (215 mm) Oct 20 03:56:23.43: [28263]: REMOTE wants unlimited page length Oct 20 03:56:23.43: [28263]: REMOTE wants 7.7 line/mm Oct 20 03:56:23.43: [28263]: REMOTE wants 2-D MR Oct 20 03:56:23.43: [28263]: --> [7:CONNECT] Oct 20 03:56:23.43: [28263]: RECV: begin page Oct 20 03:56:23.43: [28263]: RECV: send trigger 022 Oct 20 03:56:23.43: [28263]: <-- data [1] Oct 20 03:56:23.43: [28263]: Copy quality checking performed by modem Oct 20 03:56:41.60: [28263]: RECV: 32765 bytes of data, 1469 total lines Oct 20 03:56:55.47: [28263]: RECV: 24872 bytes of data, 2294 total lines Oct 20 03:56:56.76: [28263]: --> [16:+FPS:1,8F4,2,2,0] Oct 20 03:56:56.76: [28263]: --> [6:+FET:0] Oct 20 03:56:56.76: [28263]: RECV recv MPS (more pages, same document) Oct 20 03:56:56.76: [28263]: --> [2:OK] Oct 20 03:56:56.76: [28263]: RECV send MCF (message confirmation) Oct 20 03:56:56.76: [28263]: RECV FAX (000002178): from , page 1 in 0:38, INF, 7.7 line/mm, 2-D MR, 14400 bit/s Oct 20 03:56:56.76: [28263]: <-- [7:AT+FDR\r] Oct 20 03:56:59.02: [28263]: --> [7:CONNECT] Oct 20 03:56:59.02: [28263]: RECV: begin page Oct 20 03:56:59.02: [28263]: RECV: send trigger 022 Oct 20 03:56:59.02: [28263]: <-- data [1] Oct 20 03:56:59.02: [28263]: Copy quality checking performed by modem Oct 20 03:56:59.02: [28263]: RECV: 14 bytes of data, 4 total lines Oct 20 03:57:09.62: [28263]: --> [14:+FPS:1,2,0,0,0] Oct 20 03:57:09.62: [28263]: --> [7:+FHS:A0] Oct 20 03:57:09.62: [28263]: REMOTE HANGUP: Unspecified Phase D error (code A0) Oct 20 03:57:09.62: [28263]: --> [5:ERROR] Oct 20 03:57:09.63: [28263]: RECV keeping unconfirmed page Oct 20 03:57:09.63: [28263]: RECV FAX (000002178): from , page 2 in 0:13, INF, 7.7 line/mm, 2-D MR, 14400 bit/s Oct 20 03:57:09.63: [28263]: RECV FAX (000002178): recvq/fax000001516.tif from , route to <unspecified>, 2 pages in 0:51 Oct 20 03:57:09.63: [28263]: RECV FAX: Unspecified Phase D error Oct 20 03:57:09.63: [28263]: RECV FAX (000002178): session with terminated abnormally: Unspecified Phase D error Oct 20 03:57:09.63: [28263]: RECV FAX: bin/faxrcvd "recvq/fax000001516.tif" "ttyS0" "000002178" "Unspecified Phase D error" "" "" Oct 20 03:57:09.63: [28263]: sched policy=0, priority=0 Oct 20 03:57:09.63: [28263]: sched policy=1, priority=1 Oct 20 03:57:09.63: [28263]: RECV FAX: end Oct 20 03:57:09.63: [28263]: SESSION END
It’s were the first page good and the second page black..
And another similar log:
Oct 20 15:45:27.10: [28263]: SESSION BEGIN 000002195 ******** Oct 20 15:45:27.10: [28263]: HylaFAX (tm) Version 4.2.0 Oct 20 15:45:27.10: [28263]: <-- [4:ATA\r] Oct 20 15:45:36.83: [28263]: --> [4:+FCO] Oct 20 15:45:36.83: [28263]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0' … … Oct 20 15:46:22.70: [28263]: RECV FAX (000002195): from ********, page 2 in 0:17, INF, 3.85 line/mm, 2-D MR, 14400 bit/s Oct 20 15:46:22.70: [28263]: <-- [7:AT+FDR\r] Oct 20 15:46:24.81: [28263]: --> [7:CONNECT] Oct 20 15:46:24.81: [28263]: RECV: begin page Oct 20 15:46:24.81: [28263]: RECV: send trigger 022 Oct 20 15:46:24.81: [28263]: <-- data [1] Oct 20 15:46:24.81: [28263]: Copy quality checking performed by modem Oct 20 15:46:24.81: [28263]: RECV: 14 bytes of data, 4 total lines Oct 20 15:46:35.42: [28263]: --> [14:+FPS:1,2,0,0,0] Oct 20 15:46:35.42: [28263]: --> [7:+FHS:A0] Oct 20 15:46:35.42: [28263]: REMOTE HANGUP: Unspecified Phase D error (code A0) Oct 20 15:46:35.42: [28263]: --> [5:ERROR] Oct 20 15:46:35.42: [28263]: RECV keeping unconfirmed page Oct 20 15:46:35.42: [28263]: RECV FAX (000002195): from *******, page 3 in 0:13, INF, 3.85 line/mm, 2-D MR, 14400 bit/s Oct 20 15:46:35.42: [28263]: RECV FAX (000002195): recvq/fax000001525.tif from 4146412, route to <unspecified>, 3 pages in 0:59 Oct 20 15:46:35.42: [28263]: RECV FAX: Unspecified Phase D error Oct 20 15:46:35.42: [28263]: RECV FAX (000002195): session with ******** terminated abnormally: Unspecified Phase D error Oct 20 15:46:35.42: [28263]: RECV FAX: bin/faxrcvd "recvq/fax000001525.tif" "ttyS0" "000002195" "Unspecified Phase D error" "" "" Oct 20 15:46:35.42: [28263]: sched policy=0, priority=0 Oct 20 15:46:35.42: [28263]: sched policy=1, priority=1 Oct 20 15:46:35.42: [28263]: RECV FAX: end Oct 20 15:46:35.42: [28263]: SESSION END
The sender following trial:
Oct 20 15:55:28.18: [28272]: SESSION BEGIN 000002196 3614133461 Oct 20 15:55:28.18: [28272]: HylaFAX (tm) Version 4.2.0 Oct 20 15:55:28.18: [28272]: <-- [4:ATA\r] Oct 20 15:56:28.88: [28272]: --> [10:NO CARRIER] Oct 20 15:56:28.88: [28272]: ANSWER: Ring detected without successful handshake Oct 20 15:56:28.88: [28272]: SESSION END
I get sometimes the „Ring detected without successful handshake” message.. Do you get sometimes this?
Could you help me? Thanks in advance..
Best Regards, -Balázs |
|
|
|