Re: [hylafax-users] Rockwell modem cards in Lucent TNT

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2004.08.24 15:43 Tracy R Reed wrote:

> Aug 24 15:48:15.46: [10945]: SEND training at v.27ter fallback mode
> 2400 bit/s
> Aug 24 15:48:15.46: [10945]: <-- [9:AT+FTH=3\r]
> Aug 24 15:48:15.66: [10945]: --> [7:CONNECT]
> Aug 24 15:48:15.66: [10945]: <-- HDLC<23:FF C0 C2 4C CC EC EC EC 4C EC
> 6C 6C 1C 04 04 04 04 04 04 04 04 04 04>
> Aug 24 15:48:15.66: [10945]: <-- data [23]
> Aug 24 15:48:15.66: [10945]: <-- data [2]
> Aug 24 15:48:17.56: [10945]: --> [7:CONNECT]
> Aug 24 15:48:17.56: [10945]: <-- HDLC<6:FF C8 C1 00 40 10>
> Aug 24 15:48:17.56: [10945]: <-- data [6]
> Aug 24 15:48:17.56: [10945]: <-- data [2]
> Aug 24 15:48:18.06: [10945]: --> [2:OK]
> Aug 24 15:48:18.06: [10945]: DELAY 70 ms
> Aug 24 15:48:18.13: [10945]: MODEM set XON/XOFF/FLUSH: input
> interpreted, output disabled
> Aug 24 15:48:18.13: [10945]: <-- [10:AT+FTM=24\r]
> Aug 24 15:48:18.36: [10945]: --> [7:CONNECT]
> Aug 24 15:48:18.36: [10945]: <-- data [450]
> Aug 24 15:48:18.36: [10945]: <-- data [2]
> Aug 24 15:48:20.66: [10945]: --> [2:OK]
> Aug 24 15:48:20.66: [10945]: MODEM set XON/XOFF/DRAIN: input ignored,
> output disabled
> Aug 24 15:48:20.66: [10945]: <-- [9:AT+FRH=3\r]
> Aug 24 15:48:21.76: [10945]: --> [7:CONNECT]
> Aug 24 15:48:22.76: [10945]: --> HDLC<5:FF C8 22 67 DD>
> Aug 24 15:48:22.76: [10945]: --> [2:OK]
> Aug 24 15:48:22.76: [10945]: TRAINING failed

Basically HylaFAX sends training at all of the various speeds and never 
gets the CFR signal from the receiver.  It's hard to explain why this 
would be the case unless the line connection between endpoints is just 
horribly poor.  Is there anything that the receiver is giving out as 
clues as to what happened?  Does this happen to all destinations?

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*