|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] High Error Rates revisited.
On 2004.08.02 10:29 Stephen Carville wrote:
I upgraded to 4.2.0rc2 but I am still having problems with errors.
for
example:
Aug 02 09:32:52.41: [ 5799]: RECV: 45 total lines, 32 bad lines, 10
consecutive bad lines
Aug 02 09:32:52.41: [ 5799]: RECV: REJECT page quality, 28% good lines
(95%
required)
Aug 02 09:32:52.41: [ 5799]: RECV: end page
Aug 02 09:32:52.53: [ 5799]: --> [10:NO CARRIER]
Aug 02 09:32:52.53: [ 5799]: <-- [9:AT+FRH=3\r]
Aug 02 09:32:53.49: [ 5799]: --> [7:CONNECT]
Aug 02 09:32:53.62: [ 5799]: --> [2:OK]
Aug 02 09:32:53.62: [ 5799]: RECV recv EOP (no more pages or
documents)
Aug 02 09:32:53.62: [ 5799]: <-- [9:AT+FRS=7\r]
Aug 02 09:32:53.74: [ 5799]: --> [2:OK]
Aug 02 09:32:53.74: [ 5799]: <-- [9:AT+FTH=3\r]
Aug 02 09:32:53.86: [ 5799]: --> [7:CONNECT]
Aug 02 09:32:55.07: [ 5799]: --> [2:OK]
Aug 02 09:32:55.07: [ 5799]: RECV send RTN (retrain negative)
Aug 02 09:32:55.07: [ 5799]: <-- [9:AT+FRH=3\r]
Aug 02 09:32:56.23: [ 5799]: --> [7:CONNECT]
Aug 02 09:32:56.36: [ 5799]: --> [2:OK]
Aug 02 09:32:56.36: [ 5799]: RECV recv DCN
The receiver hung up when HylaFAX told them that the page was not
received properly.
Aug 02 07:04:26.03: [ 5796]: RECV: 51 total lines, 36 bad lines, 11
consecutive bad lines
Aug 02 07:04:26.03: [ 5796]: RECV: REJECT page quality, 29% good lines
(95%
required)
Aug 02 07:04:26.03: [ 5796]: RECV: end page
Aug 02 07:04:26.03: [ 5796]: --> [10:NO CARRIER]
Aug 02 07:04:26.03: [ 5796]: <-- [9:AT+FRH=3\r]
Aug 02 07:04:27.00: [ 5796]: --> [7:CONNECT]
Aug 02 07:04:27.13: [ 5796]: --> [2:OK]
Aug 02 07:04:27.13: [ 5796]: RECV recv EOP (no more pages or
documents)
Aug 02 07:04:27.13: [ 5796]: <-- [9:AT+FRS=7\r]
Aug 02 07:04:27.25: [ 5796]: --> [2:OK]
Aug 02 07:04:27.25: [ 5796]: <-- [9:AT+FTH=3\r]
Aug 02 07:04:27.37: [ 5796]: --> [7:CONNECT]
Aug 02 07:04:28.58: [ 5796]: --> [2:OK]
Aug 02 07:04:28.58: [ 5796]: RECV send RTN (retrain negative)
Aug 02 07:04:28.58: [ 5796]: <-- [9:AT+FRH=3\r]
Aug 02 07:04:29.86: [ 5796]: --> [7:CONNECT]
Aug 02 07:04:30.00: [ 5796]: --> [2:OK]
Aug 02 07:04:30.00: [ 5796]: RECV recv DCN
Again, the receiver hung up when HylaFAX told them that the page was
not received properly.
HylaFAX can only do so much. If there is noise on the line or if the
modulators on the modem generate noise, then HylaFAX cannot resolve
that. Both of these logs indicate that some catastrophic noise event
occurred to interfere with the data it received from the sender.
HylaFAX informed the sender that the data was not acceptable, and the
sender chose to hang up. What more can HylaFAX do?
You could check your lines for noise, and you could try a different
brand and model modem (thus, switching the modulators) to see if a
different one handles the problem a bit better.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
