[hylafax-users] at command

["madhu K.S." <madhu_ksblr@xxxxxxxxxxx>]

Sir,

Below information is taken from modem manual.


****Returning to the Command State After Dialing*****

            Occasionally you may want the modem to
dial a number and then to return to Command State to
send additional commands before establishing a data
connection. You will find this feature useful when
dialing an electronic service such as telephone
banking. You can dial the number of the bank, then
after the call is answered, you can enter your access
code.
To cause the modem to return to Command State after
dialing, include a ; (semicolon) at the end of the
command line.

For example, to dial a bank for electronic banking,
you might type the following command:

                  ATDT 876-5555; <Enter> 

Here, the modem tone dials the number. If the remote
modem answers, you see the OK Result Code, and can
enter addition commands. For example, to instruct the
modem to dial your access code or account number, you
could enter the second command line as follows:

                  ATDT 12345678 <Enter> 

If the connection is successful, you will see the
CONNECT Result Code on your screen.

*****************************************************
My question is ,
where to find the received 12345678 data for further
processing ?.

Thanks.

________________________________________________________________________
Yahoo! India Matrimony: Find your partner online. http://yahoo.shaadi.com/india-matrimony/

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*