|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Fax Receive Problem
I am still stuck on Hylafax 4.1.1 and would like to get my Computer
recieving faxes again. But is has been a while since configuring Hylafax for
this so help would be appreciated. I have studied the FAQ and other docs.
Can someone cast their eye over this to see if there is anything that would
stop faxgetty from answering a call.- any call ?
Sending faxes is working ok except for session tracing which defies my efforts.
For Recieving Faxes/Calls I have tested the set up with Minicom. It reporting RING3 ok.
This is what I want.
When I phone the fax number I can see activity in the LED's on each ring, but faxgetty
is not answering. Should there be additional Fax commands in this file ?
Brian Marr
The config.tty file
Snip!
#
CountryCode:
AreaCode: 08
FAXNumber: xxxxxxxx
LongDistancePrefix:
InternationalPrefix:
DialStringRules: etc/dialrules
ServerTracing: 11
SessionTracing: 0xfff #0x4f
RecvFileMode: 0640
LogFileMode: 0640
DeviceMode: 0660
RingsBeforeAnswer: 3
RingFax: RING3
SpeakerVolume: off
GettyArgs: "-r -b %l"
LocalIdentifier: "Brian Marr"
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use this to supply a hint
#ModemRate: 38400 # rate for DCE-DTE communication
#ModemflowControl: xonxoff # XON/XOFF Flow Control
ModemFlowControl: rtscts # default
#
ModemNoFlowCmd: AT&K0 # setup no flow control
ModemHardFlowCmd: AT&K3 # setup hardware flow control
ModemSoftFlowCmd: AT&K4 # setup software flow control
ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or
not)
#
ModemMfrQueryCmd: !Rockwell
ModemModelQueryCmd: !RC288DPi
ModemRevQueryCmd: ATI3 # product information
#
ModemDialCmd: ATDT%s # T for tone dialing
ModemSetupAACmd: AT+FAA=1 # Adaptive Answer placed by BM
(Snip)
====================================================================
====================================================================
Here is the class1 file
# Generic Class 1 modem configuration.
#
# EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
#
# BEGIN-SERVER
#CountryCode: 1 # USA
#LongDistancePrefix: 1
#InternationalPrefix: 011
#AreaCode: 415
#DialStringRules: etc/dialrules
#FAXNumber: +1.999.555.1212
#LocalIdentifier: "NothingSetup" # default is canonical FAXNumber
#ServerTracing: 1 # log server-related operations
#SessionTracing: 11 # log server-related
operations
#RecvFileMode: 0600 # recvd facsimile are not public
#LogFileMode: 0600 # private log files
#DeviceMode: 0600 # device is accessible only to
uucp/fax
#QualifyTSI: etc/tsi # accept facsimile from anyone
#SpeakerVolume: off # machine's are already too loud
#RingsBeforeAnswer: 1 # answer on first ring
#TagLineFont: etc/lutRS18.pcf # tag line font
#TagLineFormat: "From %%l|%c|Page %%P of %%T"
#MaxBadCalls: 5 # max 5 consecutive bad calls
#PostScriptTimeout: 300 # 5 minute timeout on PostScript
jobs
#MaxSendPages: 25 # max pages in an outbound job
#MaxRecvPages: 25 # max pages in an inbound job
#ContCoverPage: etc/cover.templ # enable continuation cover pages
#DestControls: etc/destcontrols # destination-specific controls
#MaxConcurrentJobs: 1 # serialize jobs to the same dest
#TimeOfDay: "Any" # outbound jobs any day, any time
# END-SERVER
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use this to supply a hint
#ModemRate: 19200 # rate for DCE-DTE communication
#ModemFlowControl: xonxoff # XON/XOFF flow control assumed
#
#ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
#ModemSetupDCDCmd: AT&C1 # setup so DCD follows carrier
GettyArgs: "-h %l dx_%s" # modem must auto-detect fax/data
#
# We normally append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer. This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
# put it in the ModemDialCmd; e.g. "DT9%s@".
#
#ModemDialCmd: ATDT%s@ # T for tone dialing, @ for silence
#
# Other possible configuration stuff. The default strings are
# shown below. Only those that are different from the defaults
# need to be included in the configuration file.
#
#ModemResetCmds: "" # stuff to do when modem is
reset
ModemAnswerCmd: ATA # use this to answer phone
#ModemNoFlowCmd: AT&K # disable flow control cmd
#ModemHardFlowCmd: AT&K3 # hardware flow control cmd
#ModemSoftFlowCmd: AT&K4 # software flow control cmd
#ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
#ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
#ModemEchoOffCmd: ATE0 # disable command echo
#ModemVerboseResultsCmd: ATV1 # enable verbose command
results
#ModemResultCodesCmd: ATQ0 # enable result codes
#ModemOnHookCmd: ATH0 # place phone on hook
(hangup)
#ModemSoftResetCmd: ATZ # do soft reset of modem
#ModemSoftResetCmdDelay: 3000 # pause after soft reset
#ModemWaitTimeCmd: ATS7=60 # wait 60 seconds for carrier
#ModemCommaPauseTimeCmd: ATS8=2 # comma pause time is 2
seconds
#ModemRecvFillOrder: LSB2MSB # bit order of received facsimile
#ModemSendFillOrder: LSB2MSB # bit order modem expects for
transmit
#
Class1Cmd: AT+FCLASS=1 # command to enter class 1
Class1PPMWaitCmd: AT+FTS=7 # command to stop and wait before
PPM
Class1TCFWaitCmd: AT+FTS=7 # command to stop and wait before
TCF
Class1EOPWaitCmd: AT+FTS=9 # command to stop and wait before
EOP
Class1TCFResponseDelay: 75 # 75ms delay between recv TCF &
response
Class1SendMsgDelay: 75 # 75ms delay after training
Class1SwitchingDelay: 75 # 150ms delay in switching
transmission direction
Class1TrainingRecovery: 1500 # 1.5sec delay after training
failure
Class1RecvAbortOK: 200 # wait 200ms for abort response
Class1FrameOverhead: 4 # 4 byte overhead in recvd HDLC
frames
Class1RecvIdentTimer: 40000 # 35+5secs waiting for ident frames
Class1TCFMaxNonZero: 10 # max 10% of data may be non-zero
Class1TCFMinRun: 1000 # min run is 2/3rds of TCF duration
--
Powered by Suse Linux 8.0
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
