|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] hylafax use only one of two modems
Hi,
looks like the modem does not talk to you any more after sending one fax.
check the ModemResetCmds parameter in the config-file.
is it still possible to talk to the modem with minicom ?
do you receive "modem wedged" mails ??
HIH
-m
Am Dienstag, 7. Oktober 2003 02:35 schrieb Abacus Computer:
> Hi, thanks for great help.
>
> Now have restarted second modem with faxmodem and I could send a fax thru
> ttyS1 (second Modem).
>
> But it seams the problem is that the modem hangs after sending the fax.
> I got the respond from faxstat -s
> Modem ttyS0 (+1.999.555.1212): Running and idle
> Modem ttyS1 (+1.999.555.1212): Waiting for modem to come ready
> also after 10 minutes.
> What happens with this second modem?
> I have checked the logfile also. But it looks good like all the others.
>
> Also I try faxmodem ttyS1 to restart the modem again. but nothing happens.
> Same message from faxstat -s
> Modem ttyS0 (+1.999.555.1212): Running and idle
> Modem ttyS1 (+1.999.555.1212): Waiting for modem to come ready
>
> I am remote from the modem and server and cannot check it physically.
> I will let it check from a technican. Or can I do anything else?
>
> best regards
> Christian
>
> At 12:32 01.10.03, you wrote:
> >Content-Transfer-Encoding: 8bit
> >Content-Disposition: inline
> >
> >Hi,
> >
> >this is a lot to unprecise to give you any hints.
> >
> >Did you do faxaddmodem to setup the modem ??
> >Did you do faxmodem ttyS??, to restart your modem ??
> >what does faxstat -s show, when you put the fax in the queue
> >with sendfax -n -h yourmodem@yourfaxserver -d PHONENUMBER FILE ??
> >
> >If the fax is in the queue and you still have no success,
> >turn the Session Tracing Parameter for the desired modem in the
> >config-file config.ttyS?? to 0xff.
> >
> >When hylafax atempts to transmit a fax, you can have a look at the
> >comm-log in the log directory there are a lot of files c???????.
> >the latest file should be the one with the debugging information
> >
> >HIH
> >-m
> >
> >Am Dienstag, 30. September 2003 18:51 schrieb Abacus Computer:
> > > Hi,
> > >
> > > I have tried to send a fax with specified modem. But there happens
> > > nothing and I cannot find an error message.
> > >
> > > There a the document in the docq and in sendq also. But I cannot find
> > > any hint why it is not working.
> > >
> > > What can I do?
> > >
> > > best regards
> > > Christian
> > >
> > > At 12:24 26.09.03, you wrote:
> > > >Content-Transfer-Encoding: 8bit
> > > >Content-Disposition: inline
> > > >
> > > >Hi Christian
> > > >
> > > >man sendfax
> > > >
> > > > -h [modem@]host[:port]
> > > > Force the jobs to be processed on a specific
> > > > host and, optionally, using a particular
> > > > modem. The host may be either a symbolic name
> > > > or a network address. If no -h option is sup
> > > > plied, sendfax uses the FAXSERVER environment
> > > > variable to identify the HylaFAX server to
> > > > which the jobs should be directed. If no
> > > > server is specified then sendfax attempts to
> > > > contact a server on the local host. If no
> > > > modem is specified, the job will be submitted
> > > > to any available modem.
> > > >HIH
> > > >
> > > >-m
> > > >
> > > >Am Freitag, 26. September 2003 03:07 schrieb Abacus Computer:
> > > > > Thanks,
> > > > > but I am working with sendfax and I do not find any parameter to
> > > > > specify the modem to fax.
> > > > > Normally hylafax must use the second fax if the first is in use -
> > > > > or not? Or need this a special configuration?
> > > > >
> > > > > How can I test ttyS1 by hylafax?
> > > > >
> > > > > regards
> > > > > Christian
> > > > >
> > > > > At 09:25 25.09.03, you wrote:
> > > > > >Hi Christian,
> > > > > >
> > > > > >try faxmodem ttyS1 and see if the faxes will be sent on ttyS1 too.
> > > > > >
> > > > > >HIH
> > > > > >-m
> > > > > >
> > > > > >Am Donnerstag, 25. September 2003 16:54 schrieb Abacus Computer:
> > > > > > > Hi,
> > > > > > > I have running hylafax 4.1.5 on Redhat-linux 8.0 with two
> > > > > > > modems Practical Peripherals Modem Model # PM144MT II
> > > > > > >
> > > > > > > Both are installed and working on ttyS0 and ttyS1, tested with
> > > > > > > miniserv, and both have the status "Running and idle".
> > > > > > >
> > > > > > > But if I send a lot of faxes (10) in a short time (1 minute)
> > > > > > > all faxes are sent about ttyS0 one after another and nothing
> > > > > > > about ttyS1. I have no idea what there are wrong.
> > > > > > >
> > > > > > > Best regards
> > > > > > > Christian
> > > > > > >
> > > > > > >
> > > > > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > > > > _______________________ To subscribe/unsubscribe, click
> > > > > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To
> > > > > > > learn about commercial HylaFAX(tm) support, mail
> > > > > > > sales@xxxxxxxxxxxx*
> > > > > >
> > > > > >--
> > > > > >HAGOS eG phone: +49 711 7880592
> > > > > >Matthias Reich fax: +49 711 7880535
> > > > > >Industriestr. 62 web: http://www.hagos.de
> > > > > >D-70565 Stuttgart mail: rei@xxxxxxxx
> > > > > >Germany
> > > > > >
> > > > > >____________________ HylaFAX(tm) Users Mailing List
> > > > > > _______________________ To subscribe/unsubscribe, click
> > > > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To
> > > > > > learn about commercial HylaFAX(tm) support, mail
> > > > > > sales@xxxxxxxxxxxx*
> > > > >
> > > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > > _______________________ To subscribe/unsubscribe, click
> > > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn
> > > > > about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> > > >
> > > >--
> > > >HAGOS eG phone: +49 711 7880592
> > > >Matthias Reich fax: +49 711 7880535
> > > >Industriestr. 62 web: http://www.hagos.de
> > > >D-70565 Stuttgart mail: rei@xxxxxxxx
> > > >Germany
> >
> >--
> >HAGOS eG phone: +49 711 7880592
> >Matthias Reich fax: +49 711 7880535
> >Industriestr. 62 web: http://www.hagos.de
> >D-70565 Stuttgart mail: rei@xxxxxxxx
> >Germany
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
--
HAGOS eG phone: +49 711 7880592
Matthias Reich fax: +49 711 7880535
Industriestr. 62 web: http://www.hagos.de
D-70565 Stuttgart mail: rei@xxxxxxxx
Germany
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
