|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] hylafax use only one of two modems
Hi, thanks for great help.
Now have restarted second modem with faxmodem and I could send a fax thru
ttyS1 (second Modem).
But it seams the problem is that the modem hangs after sending the fax.
I got the respond from faxstat -s
Modem ttyS0 (+1.999.555.1212): Running and idle
Modem ttyS1 (+1.999.555.1212): Waiting for modem to come ready
also after 10 minutes.
What happens with this second modem?
I have checked the logfile also. But it looks good like all the others.
Also I try faxmodem ttyS1 to restart the modem again. but nothing happens.
Same message from faxstat -s
Modem ttyS0 (+1.999.555.1212): Running and idle
Modem ttyS1 (+1.999.555.1212): Waiting for modem to come ready
I am remote from the modem and server and cannot check it physically.
I will let it check from a technican. Or can I do anything else?
best regards
Christian
At 12:32 01.10.03, you wrote:
>Content-Transfer-Encoding: 8bit
>Content-Disposition: inline
>
>Hi,
>
>this is a lot to unprecise to give you any hints.
>
>Did you do faxaddmodem to setup the modem ??
>Did you do faxmodem ttyS??, to restart your modem ??
>what does faxstat -s show, when you put the fax in the queue
>with sendfax -n -h yourmodem@yourfaxserver -d PHONENUMBER FILE ??
>
>If the fax is in the queue and you still have no success,
>turn the Session Tracing Parameter for the desired modem in the
>config-file config.ttyS?? to 0xff.
>
>When hylafax atempts to transmit a fax, you can have a look at the
>comm-log in the log directory there are a lot of files c???????.
>the latest file should be the one with the debugging information
>
>HIH
>-m
>
>
>Am Dienstag, 30. September 2003 18:51 schrieb Abacus Computer:
> > Hi,
> >
> > I have tried to send a fax with specified modem. But there happens nothing
> > and I cannot find an error message.
> >
> > There a the document in the docq and in sendq also. But I cannot find any
> > hint why it is not working.
> >
> > What can I do?
> >
> > best regards
> > Christian
> >
> > At 12:24 26.09.03, you wrote:
> > >Content-Transfer-Encoding: 8bit
> > >Content-Disposition: inline
> > >
> > >Hi Christian
> > >
> > >man sendfax
> > >
> > > -h [modem@]host[:port]
> > > Force the jobs to be processed on a specific
> > > host and, optionally, using a particular
> > > modem. The host may be either a symbolic name
> > > or a network address. If no -h option is sup
> > > plied, sendfax uses the FAXSERVER environment
> > > variable to identify the HylaFAX server to
> > > which the jobs should be directed. If no
> > > server is specified then sendfax attempts to
> > > contact a server on the local host. If no
> > > modem is specified, the job will be submitted
> > > to any available modem.
> > >HIH
> > >
> > >-m
> > >
> > >Am Freitag, 26. September 2003 03:07 schrieb Abacus Computer:
> > > > Thanks,
> > > > but I am working with sendfax and I do not find any parameter to
> > > > specify the modem to fax.
> > > > Normally hylafax must use the second fax if the first is in use - or
> > > > not? Or need this a special configuration?
> > > >
> > > > How can I test ttyS1 by hylafax?
> > > >
> > > > regards
> > > > Christian
> > > >
> > > > At 09:25 25.09.03, you wrote:
> > > > >Hi Christian,
> > > > >
> > > > >try faxmodem ttyS1 and see if the faxes will be sent on ttyS1 too.
> > > > >
> > > > >HIH
> > > > >-m
> > > > >
> > > > >Am Donnerstag, 25. September 2003 16:54 schrieb Abacus Computer:
> > > > > > Hi,
> > > > > > I have running hylafax 4.1.5 on Redhat-linux 8.0 with two modems
> > > > > > Practical Peripherals Modem Model # PM144MT II
> > > > > >
> > > > > > Both are installed and working on ttyS0 and ttyS1, tested with
> > > > > > miniserv, and both have the status "Running and idle".
> > > > > >
> > > > > > But if I send a lot of faxes (10) in a short time (1 minute) all
> > > > > > faxes are sent about ttyS0 one after another and nothing about
> > > > > > ttyS1. I have no idea what there are wrong.
> > > > > >
> > > > > > Best regards
> > > > > > Christian
> > > > > >
> > > > > >
> > > > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > > > _______________________ To subscribe/unsubscribe, click
> > > > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn
> > > > > > about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> > > > >
> > > > >--
> > > > >HAGOS eG phone: +49 711 7880592
> > > > >Matthias Reich fax: +49 711 7880535
> > > > >Industriestr. 62 web: http://www.hagos.de
> > > > >D-70565 Stuttgart mail: rei@xxxxxxxx
> > > > >Germany
> > > > >
> > > > >____________________ HylaFAX(tm) Users Mailing List
> > > > > _______________________ To subscribe/unsubscribe, click
> > > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn
> > > > > about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> > > >
> > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > _______________________ To subscribe/unsubscribe, click
> > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > > > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about
> > > > commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> > >
> > >--
> > >HAGOS eG phone: +49 711 7880592
> > >Matthias Reich fax: +49 711 7880535
> > >Industriestr. 62 web: http://www.hagos.de
> > >D-70565 Stuttgart mail: rei@xxxxxxxx
> > >Germany
>
>--
>HAGOS eG phone: +49 711 7880592
>Matthias Reich fax: +49 711 7880535
>Industriestr. 62 web: http://www.hagos.de
>D-70565 Stuttgart mail: rei@xxxxxxxx
>Germany
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
