Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] problems with Multitech Modem MT 2834ZDXb



I don't want to get into a flame war about these modems, but many vendors
recommended this modem for many years (the 1932ZDX was a bit better for some
reason -- it had a different data pump) as their top modem. The Hylafax
website recommended it without any reservations on their recommended modems
web page (http://www.hylafax.org/Modems/index.html).

That said, it is not a perfect modem and it is hard to find one of those. It
has particularly had problems with receive that was data pump related (which
is nothing we could fix any how since we got the DSP code from our
supplier -- Lucent at the time).

Steve Tuckner
Multi-Tech Systems

> -----Original Message-----
> From: Karl Denninger [mailto:karl@xxxxxxxxxxxxx]
> Sent: Monday, October 06, 2003 2:15 PM
> To: Steve Tuckner; milend@xxxxxxxxx; hylafax-users@xxxxxxxxxxx
> Subject: Re: [hylafax-users] problems with Multitech Modem MT 2834ZDXb
>
>
> Those modems NEVER worked right in fax mode.
>
> I have a handful which were purchased with the intent of
> using them with
> Hylafax and they were all pieces of crap; essentially
> unusable in Class 2
> mode.  Multitech never helped me even when they were "current
> product", and
> I have as a consequence written them off as a fax modem supplier.
>
> Their "not current product" is a nice line, but the truth is that they
> refused to fix the problems even when they WERE current product!
>
> --
> --
> Karl Denninger (karl@xxxxxxxxxxxxx) Internet Consultant &
> Kids Rights Activist
> http://www.denninger.net	Tired of spam at your company?
> LOOK HERE!
> http://childrens-justice.org	Working for family and children's rights
> http://diversunion.org		LOG IN AND GET YOUR
> TANK STICKERS TODAY!
>
> On Mon, Oct 06, 2003 at 02:01:38PM -0500, Steve Tuckner wrote:
> > Milen,
> >
> > I am sad to inform you that there is no active development
> on this product
> > anymore. You can tinker with the receive sensitivity, and
> see if it makes
> > any difference.
> >
> > S38 controls the receive sensitivity. Its default is 43
> which means -43dbm.
> > You could try going to 44 or 45 and see if that helps at
> all. As you go
> > lower (higher numbers), the modem will have trouble
> distinguishing between
> > noise and signal and may not drop carrier when it should.
> >
> > I would recommend up dating to our MT5634ZBA-V92 if you
> want to use a modem
> > with active fax development on it.
> >
> > Steve Tuckner
> > Multi-Tech Systems
> >
> > > -----Original Message-----
> > > From: hylafax-users-bounce@xxxxxxxxxxx
> > > [mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of
> Milen Dimitrov
> > > Sent: Monday, October 06, 2003 1:40 PM
> > > To: hylafax-users@xxxxxxxxxxx
> > > Subject: [hylafax-users] problems with Multitech Modem MT 2834ZDXb
> > >
> > >
> > > Hi,
> > >
> > > I have problems with a multitech modem MT2834ZDXb  in receive-only
> > > configuration
> > > It fails to receive faxes with the one of the following errors:
> > >
> > > 1. T.30 T2 timeout, expected page not received
> > > 2. COMREC error
> > > 3. Missing EOL after 5 seconds (section 3.2/T.4)
> > >
> > > Is there any known poblems with this type of modems?
> > > Do I need to change any parameters in modem config file?
> > >
> > > Thank you for your time and help!
> > > Best regards:
> > > Milen
> > >
> > > P.S. I've attached 3 sessions transmitions bellow:
> > > ===============================================
> > > Log 1
> > >
> > > The full document was not received because:
> > >
> > >     T.30 T2 timeout, expected page not received
> > >
> > >     ---- Transcript of session follows ----
> > >
> > > Oct 06 08:00:12.97: [ 2492]: SESSION BEGIN 00000277 14506580077
> > > Oct 06 08:00:12.97: [ 2492]: HylaFAX (tm) Version 4.1.7
> > > Oct 06 08:00:12.97: [ 2492]: <-- [4:ATA\r]
> > > Oct 06 08:00:25.98: [ 2492]: --> [5:+FCON]
> > > Oct 06 08:00:25.98: [ 2492]: ANSWER: FAX CONNECTION  DEVICE
> > > '/dev/ttyS1'
> > > Oct 06 08:00:25.98: [ 2492]: RECV FAX: begin
> > > Oct 06 08:00:29.68: [ 2492]: --> [21:+FDCS:0,3,0,2,1,0,0,3]
> > > Oct 06 08:00:29.68: [ 2492]: REMOTE wants 9600 bit/s
> > > Oct 06 08:00:29.68: [ 2492]: REMOTE wants page width 1728
> > > pixels in 215
> > > mm
> > > Oct 06 08:00:29.68: [ 2492]: REMOTE wants unlimited page length
> > > Oct 06 08:00:29.68: [ 2492]: REMOTE wants 3.85 line/mm
> > > Oct 06 08:00:29.68: [ 2492]: REMOTE wants 2-D MR
> > > Oct 06 08:00:29.68: [ 2492]: --> [2:OK]
> > > Oct 06 08:00:29.68: [ 2492]: <-- [7:AT+FDR\r]
> > > Oct 06 08:00:31.14: [ 2492]: --> [5:+FCFR]
> > > Oct 06 08:00:31.14: [ 2492]: --> [21:+FDCS:0,3,0,2,1,0,0,3]
> > > Oct 06 08:00:31.14: [ 2492]: REMOTE wants 9600 bit/s
> > > Oct 06 08:00:31.14: [ 2492]: REMOTE wants page width 1728
> > > pixels in 215
> > > mm
> > > Oct 06 08:00:31.14: [ 2492]: REMOTE wants unlimited page length
> > > Oct 06 08:00:31.14: [ 2492]: REMOTE wants 3.85 line/mm
> > > Oct 06 08:00:31.14: [ 2492]: REMOTE wants 2-D MR
> > > Oct 06 08:00:31.61: [ 2492]: --> [7:CONNECT]
> > > Oct 06 08:00:31.61: [ 2492]: RECV: begin page
> > > Oct 06 08:00:31.61: [ 2492]: RECV: send trigger 022
> > > Oct 06 08:01:21.38: [ 2492]: RECV: 1100 total lines, 0
> bad lines, 1
> > > consecutive bad lines
> > > Oct 06 08:01:21.38: [ 2492]: --> [15:+FPTS:1,0,0,0,0]
> > > Oct 06 08:01:30.35: [ 2492]: --> [8:+FHNG:73]
> > > Oct 06 08:01:30.35: [ 2492]: REMOTE HANGUP: T.30 T2
> timeout, expected
> > > page
> > > not received (code 73)
> > > Oct 06 08:01:31.00: [ 2492]: --> [2:OK]
> > > Oct 06 08:01:31.00: [ 2492]: RECV keeping unconfirmed page
> > > Oct 06 08:01:31.00: [ 2492]: RECV FAX (00000277): from , page
> > > 1 in 1:02,
> > > INF, 3.85 line/mm, 2-D MR, 9600 bit/s
> > > Oct 06 08:01:31.00: [ 2492]: RECV FAX (00000277):
> recvq/fax00127.tif
> > > from ,
> > > route to <unspecified>, 1 pages in 1:06
> > > Oct 06 08:01:31.00: [ 2492]: RECV FAX: T.30 T2 timeout,
> expected page
> > > not
> > > received
> > > Oct 06 08:01:31.00: [ 2492]: RECV FAX (00000277): session with
> > > terminated
> > > abnormally: T.30 T2 timeout, expected page not received
> > > Oct 06 08:01:31.00: [ 2492]: RECV FAX: bin/faxrcvd
> > > "recvq/fax00127.tif"
> > > "ttyS1" "00000277" "T.30 T2 timeout, expected page not
> received" "" ""
> > > ======================================================
> > > Log 2
> > > The full document was not received because:
> > >
> > >     COMREC error
> > >
> > >     ---- Transcript of session follows ----
> > >
> > > Oct 06 08:43:35.17: [ 2492]: SESSION BEGIN 00000289 14506580077
> > > Oct 06 08:43:35.17: [ 2492]: HylaFAX (tm) Version 4.1.7
> > > Oct 06 08:43:35.17: [ 2492]: <-- [4:ATA\r]
> > > Oct 06 08:43:43.00: [ 2492]: --> [5:+FCON]
> > > Oct 06 08:43:43.00: [ 2492]: ANSWER: FAX CONNECTION  DEVICE
> > > '/dev/ttyS1'
> > > Oct 06 08:43:43.00: [ 2492]: RECV FAX: begin
> > > Oct 06 08:43:48.73: [ 2492]: --> [28:+FTSI:"          5146379388"]
> > > Oct 06 08:43:48.73: [ 2492]: REMOTE TSI "5146379388"
> > > Oct 06 08:43:48.73: [ 2492]: --> [21:+FDCS:0,5,0,2,1,0,0,0]
> > > Oct 06 08:43:48.73: [ 2492]: REMOTE wants 14400 bit/s
> > > Oct 06 08:43:48.73: [ 2492]: REMOTE wants page width 1728
> > > pixels in 215
> > > mm
> > > Oct 06 08:43:48.73: [ 2492]: REMOTE wants unlimited page length
> > > Oct 06 08:43:48.73: [ 2492]: REMOTE wants 3.85 line/mm
> > > Oct 06 08:43:48.73: [ 2492]: REMOTE wants 2-D MR
> > > Oct 06 08:43:48.73: [ 2492]: --> [2:OK]
> > > Oct 06 08:43:48.73: [ 2492]: <-- [7:AT+FDR\r]
> > > Oct 06 08:43:50.17: [ 2492]: --> [5:+FCFR]
> > > Oct 06 08:43:50.17: [ 2492]: --> [28:+FTSI:"          5146379388"]
> > > Oct 06 08:43:50.17: [ 2492]: REMOTE TSI "5146379388"
> > > Oct 06 08:43:50.17: [ 2492]: --> [21:+FDCS:0,5,0,2,1,0,0,0]
> > > Oct 06 08:43:50.17: [ 2492]: REMOTE wants 14400 bit/s
> > > Oct 06 08:43:50.17: [ 2492]: REMOTE wants page width 1728
> > > pixels in 215
> > > mm
> > > Oct 06 08:43:50.17: [ 2492]: REMOTE wants unlimited page length
> > > Oct 06 08:43:50.17: [ 2492]: REMOTE wants 3.85 line/mm
> > > Oct 06 08:43:50.17: [ 2492]: REMOTE wants 2-D MR
> > > Oct 06 08:43:50.99: [ 2492]: --> [7:CONNECT]
> > > Oct 06 08:43:50.99: [ 2492]: RECV: begin page
> > > Oct 06 08:43:50.99: [ 2492]: RECV: send trigger 022
> > > Oct 06 08:44:24.51: [ 2492]: RECV: 1126 total lines, 0
> bad lines, 1
> > > consecutive bad lines
> > > Oct 06 08:44:24.51: [ 2492]: --> [15:+FPTS:1,0,0,0,0]
> > > Oct 06 08:44:26.18: [ 2492]: --> [8:+FHNG:72]
> > > Oct 06 08:44:26.18: [ 2492]: REMOTE HANGUP: COMREC error (code 72)
> > > Oct 06 08:44:26.82: [ 2492]: --> [2:OK]
> > > Oct 06 08:44:26.82: [ 2492]: RECV keeping unconfirmed page
> > > Oct 06 08:44:26.82: [ 2492]: RECV FAX (00000289): from
> > > 5146379388, page
> > > 1 in
> > > 0:38, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
> > > Oct 06 08:44:26.82: [ 2492]: RECV FAX (00000289):
> recvq/fax00139.tif
> > > from
> > > 5146379388, route to <unspecified>, 1 pages in 0:43
> > > Oct 06 08:44:26.82: [ 2492]: RECV FAX: COMREC error
> > > Oct 06 08:44:26.82: [ 2492]: RECV FAX (00000289): session with
> > > 5146379388
> > > terminated abnormally: COMREC error
> > > Oct 06 08:44:26.82: [ 2492]: RECV FAX: bin/faxrcvd
> > > "recvq/fax00139.tif"
> > > "ttyS1" "00000289" "COMREC error" "" ""
> > >
> > >
> > > ===============================================
> > > Log 3
> > >
> > > The full document was not received because:
> > >
> > >     Missing EOL after 5 seconds (section 3.2/T.4)
> > >
> > >     ---- Transcript of session follows ----
> > >
> > > Oct 06 08:31:24.65: [ 2492]: SESSION BEGIN 00000285 14506580077
> > > Oct 06 08:31:24.65: [ 2492]: HylaFAX (tm) Version 4.1.7
> > > Oct 06 08:31:24.65: [ 2492]: <-- [4:ATA\r]
> > > Oct 06 08:31:33.15: [ 2492]: --> [5:+FCON]
> > > Oct 06 08:31:33.15: [ 2492]: ANSWER: FAX CONNECTION  DEVICE
> > > '/dev/ttyS1'
> > > Oct 06 08:31:33.15: [ 2492]: RECV FAX: begin
> > > Oct 06 08:31:38.80: [ 2492]: --> [28:+FTSI:"         514 3519806"]
> > > Oct 06 08:31:38.80: [ 2492]: REMOTE TSI "514 3519806"
> > > Oct 06 08:31:38.80: [ 2492]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
> > > Oct 06 08:31:38.80: [ 2492]: REMOTE wants 14400 bit/s
> > > Oct 06 08:31:38.80: [ 2492]: REMOTE wants page width 1728
> > > pixels in 215
> > > mm
> > > Oct 06 08:31:38.80: [ 2492]: REMOTE wants unlimited page length
> > > Oct 06 08:31:38.80: [ 2492]: REMOTE wants 3.85 line/mm
> > > Oct 06 08:31:38.80: [ 2492]: REMOTE wants 2-D MR
> > > Oct 06 08:31:38.80: [ 2492]: --> [2:OK]
> > > Oct 06 08:31:38.80: [ 2492]: <-- [7:AT+FDR\r]
> > > Oct 06 08:31:40.24: [ 2492]: --> [5:+FCFR]
> > > Oct 06 08:31:40.24: [ 2492]: --> [28:+FTSI:"         514 3519806"]
> > > Oct 06 08:31:40.24: [ 2492]: REMOTE TSI "514 3519806"
> > > Oct 06 08:31:40.24: [ 2492]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
> > > Oct 06 08:31:40.24: [ 2492]: REMOTE wants 14400 bit/s
> > > Oct 06 08:31:40.24: [ 2492]: REMOTE wants page width 1728
> > > pixels in 215
> > > mm
> > > Oct 06 08:31:40.24: [ 2492]: REMOTE wants unlimited page length
> > > Oct 06 08:31:40.24: [ 2492]: REMOTE wants 3.85 line/mm
> > > Oct 06 08:31:40.24: [ 2492]: REMOTE wants 2-D MR
> > > Oct 06 08:31:40.76: [ 2492]: --> [7:CONNECT]
> > > Oct 06 08:31:40.76: [ 2492]: RECV: begin page
> > > Oct 06 08:31:40.76: [ 2492]: RECV: send trigger 022
> > > Oct 06 08:32:14.48: [ 2492]: RECV: 1080 total lines, 0
> bad lines, 1
> > > consecutive bad lines
> > > Oct 06 08:32:15.88: [ 2492]: --> [8:+FHNG:91]
> > > Oct 06 08:32:15.88: [ 2492]: REMOTE HANGUP: Missing EOL after
> > > 5 seconds
> > > (section 3.2/T.4) (code 91)
> > > Oct 06 08:32:16.53: [ 2492]: --> [2:OK]
> > > Oct 06 08:32:16.53: [ 2492]: RECV keeping unconfirmed page
> > > Oct 06 08:32:16.53: [ 2492]: RECV FAX (00000285): from 514
> > > 3519806, page
> > > 1
> > > in 0:38, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
> > > Oct 06 08:32:16.53: [ 2492]: RECV FAX (00000285):
> recvq/fax00135.tif
> > > from
> > > 514 3519806, route to <unspecified>, 1 pages in 0:43
> > > Oct 06 08:32:16.53: [ 2492]: RECV FAX: Missing EOL after 5 seconds
> > > (section
> > > 3.2/T.4)
> > > Oct 06 08:32:16.53: [ 2492]: RECV FAX (00000285): session with 514
> > > 3519806
> > > terminated abnormally: Missing EOL after 5 seconds
> (section 3.2/T.4)
> > > Oct 06 08:32:16.53: [ 2492]: RECV FAX: bin/faxrcvd
> > > "recvq/fax00135.tif"
> > > "ttyS1" "00000285" "Missing EOL after 5 seconds (section
> > > 3.2/T.4)" "" ""
> > >
> > >
> > >
> > >
> > > ____________________ HylaFAX(tm) Users Mailing List
> > > _______________________
> > >   To subscribe/unsubscribe, click
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe
> hylafax-users-request@xxxxxxxxxxx < /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail
> sales@xxxxxxxxxxxx*
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> >   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe
> hylafax-users-request@xxxxxxxxxxx < /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail
> sales@xxxxxxxxxxxx*
> >
> >
> >
> > %SPAMBLOCK-SYS: Matched [@hylafax.org], message ok

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services