|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Two Issues
I went back further up the chain to try and sort this out. My faxes were close
to the top of the page before sending so I moved everything down. This was
done in my accounting software. The faxes immediately showed improvement.
Now, after further testing all of the fax is being transmitted. Having the
text to close to the top of the page upset ps2fax ?
I am not sure of the reasons why. If hylafax wanted to move the page down
- and found that blocked by whitespace, or page size or whatever, it did
the next thing - cut off the top of the page.
> you can enter the values for PageChop and PageSize in your
> hyla.conf file
>
> PageChop
> Whether or not to automatically truncate trailing whitespace on pages of
> outbound facsimile (when possible). If page chopping is enabled, then pages
> with at least PageChopThreshold trailing whitespace on a page will be
> transmitted as a ``short page'' if the receiver is capable of accepting
> variable-length pages. The possible values are: ``last'' to enable chopping
> of the last page of each document, ``all'' to enable chopping of all pages,
> or ``none'' to disable page chopping.
Ok
> PageChopThreshold
> The minimum amount of trailing whitespace that must be present on a page
> before page chopping will be attempted; see PageChop. Note that this value is
> specified in inches.
>
> PageSize
>
> sets the default page size, I guess hylafax uses this parameter to convert the
> files to be send in the desired format.
>
> HIH
I am puzzled by the problem of server tracing. What hylafax directory does
your server tracing log show ?
My log directory - this must be the one for server tracing, has a list of
files like this
Sep 18 12:46:16.30: [ 9650]: SESSION BEGIN 00000072 85643390
Sep 18 12:46:16.31: [ 9650]: HylaFAX (tm) Version 4.1.1
Sep 18 12:46:16.31: [ 9650]: SEND FAX: JOB 60 DEST 85643390 COMMID 00000072
DEVICE '/dev/usb/ttyACM0'
Sep 18 12:47:20.13: [ 9650]: SESSION END
That's all
Brian
> -m
>
>
> Am Donnerstag, 18. September 2003 00:50 schrieb Brian Marr:
> > Sorry about the last post, it was not very clear.
> >
> > On Wed, Sep 17, 2003 at 07:41:26AM +0200, Matthias Reich wrote:
> > > Hi Brian,
> > >
> > > there is no entry for the parameters PageChop and PageSize
> > > in your hyla.conf file
> >
> > This version (4.1.1-1)has the file /etc/pagesizes, which seems to cover the
> > information in man pagesize.
> >
> > > man pagesizes
> > > shows you which pageformats hylafax is able to handle.
> >
> > I came across this reference to page chop in one of the logs
> > /var/spool/hylafax/doneq
> >
> > doneop:default
> > commid:00000053
> > status:Ring detect without successful handshake
> > notify:none
> > pagechop:default
> > chopthreshold:3
> > !postscript:0::docq/doc61.ps
> >
> > > Did you manage to get more log-information by setting
> > > the SessionTracing Parameter in your config-File ?
> >
> > Re Session Tracing (class 1)
> >
> > The file /etc/config.ttyACMO (Usb modem)
> > (snip)
> > DialStringRules: etc/dialrules
> > ServerTracing: 11
> > SessionTracing: 0x4f
> > RecvFileMode: 0640
> > LogFileMode: 0640
> > DeviceMode: 0660
> > RingsBeforeAnswer: 2
> > SpeakerVolume: off
> > GettyArgs: "-r -b %l"
> > LocalIdentifier: "NothingSetup"
> > TagLineFormat: "From %%l|%c|Page %%P of %%T"
> > MaxRecvPages: 25
> >
> >
> >
> > ..........but only this in /var/spool/hylafax/log/xxxxx
> > What does this log look like on your system ?
> > Brian
> >
> > Sep 17 12:39:15.53: [ 7523]: SESSION BEGIN 00000053 85643390
> > Sep 17 12:39:15.53: [ 7523]: HylaFAX (tm) Version 4.1.1
> > Sep 17 12:39:15.53: [ 7523]: SEND FAX: JOB 42 DEST 85643390 COMMID 00000053
> > DEVICE '/dev/usb/ttyACM0'
> > Sep 17 12:40:26.78: [ 7523]: SEND FAILED: JOB 42 DEST 85643390 ERR Ring
> > detect without successful handshake
> > Sep 17 12:40:28.23: [ 7523]: SESSION END
> >
> >
> > =========================================================
> >
> > > -m
> > >
> > > Am Mittwoch, 17. September 2003 01:06 schrieb Brian Marr:
> > > > On Tue, Sep 16, 2003 at 08:24:49AM +0200, Matthias Reich wrote:
> > > > > Hi Brian,
> > > > >
> > > > > to get more information in the log file you should change
> > > > > SessionTracing to 0x4f in your config.modem file.
> > > > > Besides that have a look in your hyla.conf file
> > > > > Parameters:
> > > > >
> > > > > PageChop and PageSize
> > > > >
> > > > > HIH
> > > >
> > > > Here is hyla.conf
> > > > Brian
> > > >
> > > > root@Poncho:/var/spool/hylafax/etc# more hyla.conf
> > > > #
> > > > # /etc/hylafax/hyla.conf
> > > > #
> > > > # System-wide client configuration file
> > > >
> > > >
> > > > # System-wide configuration information
> > > > # -------------------------------------
> > > >
> > > > # Host - host to contact for service
> > > > #
> > > > Host: localhost
> > > >
> > > > # Verbose - whether or not to enable protocol tracing
> > > > #
> > > > Verbose: Yes
> > > >
> > > >
> > > > # Faxstat configuration information
> > > > # ---------------------------------
> > > >
> > > > # TimeZone - control whether the times and dates are reported in the
> > > > local # timezone of the server (ocal') or in GMT (MT').
> > > > #
> > > > TimeZone: local
> > > >
> > > >
> > > > # Sendfax configuration information
> > > > # ---------------------------------
> > > >
> > > > # DialRules - file containing dialstring rules
> > > > #
> > > > #DialRules: "/etc/hylafax/dialrules"
> > > > # FontMap/FontPath added by faxsetup (Thu Jun 12 08:16:33 CEST 2003)
> > > > #FontMap:
> > > > /home/skylark/.kde/share/fonts:/usr/local/lib/ghostscript/common:/usr/l
> > > >ocal /lib/ghostscript/7.05:/usr/local/l
> > > > ib/ghostscript/fonts:/usr/local/share/ghostscript/common:/usr/local/sha
> > > >re/g hostscript/7.05:/usr/local/share/ghostscript/f
> > > > onts:/var/lib/defoma/gs.d/dirs/fonts:/usr/share/ghostscript/common:/usr
> > > >/sha re/gs/7.05 #FontPath:
> > > > /home/skylark/.kde/share/fonts:/usr/local/lib/ghostscript/common:/usr/l
> > > >ocal /lib/ghostscript/7.05:/usr/local/l
> > > > ib/ghostscript/fonts:/usr/local/share/ghostscript/common:/usr/local/sha
> > > >re/g hostscript/7.05:/usr/local/share/ghostscript/f
> > > > onts:/var/lib/defoma/gs.d/dirs/fonts:/usr/share/ghostscript/common:/usr
> > > >/sha re/gs/7.05 root@Poncho:/var/spool/hylafax/etc#
> > > >
> > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > _______________________ To subscribe/unsubscribe, click
> > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > > > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about
> > > > commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> > >
> > > --
> > > HAGOS eG phone: +49 711 7880592
> > > Matthias Reich fax: +49 711 7880535
> > > Industriestr. 62 web: http://www.hagos.de
> > > D-70565 Stuttgart mail: rei@xxxxxxxx
> > > Germany
> > >
> > > ____________________ HylaFAX(tm) Users Mailing List
> > > _______________________ To subscribe/unsubscribe, click
> > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial
> > > HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> >
> > ____________________ HylaFAX(tm) Users Mailing List _______________________
> > To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> > *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
>
> --
> HAGOS eG phone: +49 711 7880592
> Matthias Reich fax: +49 711 7880535
> Industriestr. 62 web: http://www.hagos.de
> D-70565 Stuttgart mail: rei@xxxxxxxx
> Germany
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
>
>
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
