|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] How to enable ECM?
On 2003.08.26 14:40 George Bell wrote:
> It appears that the default values for modem parameters are:
>
> AT+FCC=1,5,2,2,3,0,0,0,0
>
> I'd like to enable ECM, by turning the sixth paramter to a "1".
> The modem is working in 2.0 fax mode.
Well, in Class 2.0 the modem's firmware must support ECM. You can find
out with AT+FCC=?.
> I tried writing the default into the modem itself, but this didn't
> work. It appears that hylafax overrides the modem values and
> places its own. I've looked in config.ttySN and the config files
> in /usr/lib/fax but can't see anywhere to change this.
>
> How do I turn on ECM?
It should "turn on" automatically if it is supported by the modem.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
