[hylafax-users] FW: Fax missed lines

[hylafax-users-bounce@hylafax.org]

Hi Carlo, 
	I haven't seen your trace, but this is almost always a flow control problem on the modem.  I had exactly the same problem.  You will want to add one or more of the following entries to your config.ttyS{x} file: "ModemFlowControl", "ModemHardFlowCmd", "ModemSoftFlowCmd".  If you are using Class 1, you are encouraged to use software flow control since Class 1 does not officially support hardware flow control.  

See http://www.hylafax.org/setup.html#FlowControl for more info...

-----Original Message-----
From: libero [mailto:carlo_lombardi@libero.it]
Sent: Monday, August 25, 2003 10:02 AM
To: HylaFax-users
Subject: [hylafax-users] Fax missed lines


When I send faxes some line are missed or partailly overlapped.
I use Hylafax on Suse 8.0
Find attached the bad fax I receive.
As you can see lines 11 26 and 41 are omitted.
Besides page 2 is added containing the last line repeated.
What's wrong ?

This is the report I receve from the server

Your facsimile job to 1786050582  was completed successfully.

         Pages: 1
       Quality: Fine
    Page Width: 209 (mm)
   Page Length: 296 (mm)
   Signal Rate: 14400 bit/s
   Data Format: 1-D MR
       Dialogs: 2 (exchanges with remote device)
         Calls: 2 (total phone calls placed)
Submitted From: 10.0.100.100
         JobID: 101
       GroupID: 101
        CommID: c00000810

Processing time was 1:07.


Thank you
Carlo 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*