|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Fax receive EOP or MPN problem
Hi,
I am using Hylafax 4.1.5 (latest SuSE 8.2 downloaded patch) in a stand
alone PC
with Creatix V90 external modem. Sending works OK. Receiving fails.
External faxes and many internal/local sends from a laptop running a
Windoze
fax tool both give the same log mesage (/var/spool/fax/log/c0000xx) as
the example below:
Jul 17 15:56:23.80: [ 2003]: SESSION BEGIN 00000026 49xxxxxxxxxxx
Jul 17 15:56:23.80: [ 2003]: HylaFAX (tm) Version 4.1.5
Jul 17 15:56:23.80: [ 2003]: MODEM set XON/XOFF/FLUSH: input ignored,
output
disabled
Jul 17 15:56:23.80: [ 2003]: <-- [4:ATA\r]
Jul 17 15:56:26.80: [ 2003]: --> [7:CONNECT]
Jul 17 15:56:26.80: [ 2003]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Jul 17 15:56:26.80: [ 2003]: MODEM input buffering enabled
Jul 17 15:56:26.80: [ 2003]: RECV FAX: begin
Jul 17 15:56:26.80: [ 2003]: RECV FAX: CDPN
Jul 17 15:56:26.80: [ 2003]: MODEM input buffering disabled
Jul 17 15:56:26.80: [ 2003]: <-- data [23]
Jul 17 15:56:26.80: [ 2003]: <-- data [2]
Jul 17 15:56:28.44: [ 2003]: --> [7:CONNECT]
Jul 17 15:56:28.44: [ 2003]: <-- data [10]
Jul 17 15:56:28.44: [ 2003]: <-- data [2]
Jul 17 15:56:28.87: [ 2003]: --> [2:OK]
Jul 17 15:56:28.87: [ 2003]: <-- [9:AT+FRH=3\r]
Jul 17 15:56:28.96: [ 2003]: --> [7:CONNECT]
Jul 17 15:56:31.53: [ 2003]: --> [2:OK]
Jul 17 15:56:31.53: [ 2003]: REMOTE TSI "+49 xxxxxxxxx"
Jul 17 15:56:31.53: [ 2003]: <-- [9:AT+FRH=3\r]
Jul 17 15:56:31.57: [ 2003]: --> [7:CONNECT]
Jul 17 15:56:31.80: [ 2003]: --> [2:OK]
Jul 17 15:56:31.80: [ 2003]: REMOTE wants 14400 bit/s
Jul 17 15:56:31.80: [ 2003]: REMOTE wants page width 1728 pixels in 215 mm
Jul 17 15:56:31.80: [ 2003]: REMOTE wants unlimited page length
Jul 17 15:56:31.80: [ 2003]: REMOTE wants 7.7 line/mm
Jul 17 15:56:31.80: [ 2003]: REMOTE wants 1-D MR
Jul 17 15:56:31.80: [ 2003]: RECV training at v.17 14400 bit/s
Jul 17 15:56:31.80: [ 2003]: MODEM set XON/XOFF/DRAIN: input ignored, output
generated
Jul 17 15:56:31.80: [ 2003]: <-- [11:AT+FRM=145\r]
Jul 17 15:56:33.51: [ 2003]: --> [7:CONNECT]
Jul 17 15:56:35.04: [ 2003]: MODEM set XON/XOFF/DRAIN: input ignored, output
disabled
Jul 17 15:56:35.04: [ 2003]: RECV: TCF 2720 bytes, 0% non-zero, 2703
zero-run
Jul 17 15:56:35.04: [ 2003]: --> [10:NO CARRIER]
Jul 17 15:56:35.04: [ 2003]: DELAY 75 ms
Jul 17 15:56:35.12: [ 2003]: TRAINING succeeded
Jul 17 15:56:35.12: [ 2003]: <-- [9:AT+FTH=3\r]
Jul 17 15:56:35.16: [ 2003]: --> [7:CONNECT]
Jul 17 15:56:35.16: [ 2003]: <-- data [3]
Jul 17 15:56:35.16: [ 2003]: <-- data [2]
Jul 17 15:56:36.37: [ 2003]: --> [2:OK]
Jul 17 15:56:36.37: [ 2003]: MODEM input buffering enabled
Jul 17 15:56:36.37: [ 2003]: MODEM set XON/XOFF/FLUSH: input ignored,
output
generated
Jul 17 15:56:36.37: [ 2003]: <-- [11:AT+FRM=146\r]
Jul 17 15:56:36.91: [ 2003]: --> [7:CONNECT]
Jul 17 15:56:36.91: [ 2003]: RECV: begin page
Jul 17 15:57:04.94: [ 2003]: RECV: 2396 total lines, 0 bad lines, 0
consecutive
bad lines
Jul 17 15:57:04.94: [ 2003]: RECV: end page
Jul 17 15:57:04.94: [ 2003]: --> [10:NO CARRIER]
Jul 17 15:57:04.94: [ 2003]: MODEM set XON/XOFF/DRAIN: input ignored,
output
disabled
Jul 17 15:57:04.94: [ 2003]: MODEM input buffering disabled
Jul 17 15:57:04.94: [ 2003]: <-- [9:AT+FRH=3\r]
Jul 17 15:57:05.01: [ 2003]: --> [7:CONNECT]
Jul 17 15:57:07.00: [ 2003]: --> [2:OK]
Jul 17 15:57:07.00: [ 2003]: RECV recv EOP (no more pages or documents)
Jul 17 15:57:07.00: [ 2003]: <-- [9:AT+FRS=7\r]
Jul 17 15:57:37.00: [ 2003]: MODEM TIMEOUT: reading line from modem
Jul 17 15:57:37.00: [ 2003]: MODEM <Timeout>
Jul 17 15:57:37.00: [ 2003]: RECV FAX (00000026): recvq/fax00021.tif
from +49
xxxxxxxxx, route to <unspecified>, 0 pages in 1:11
Jul 17 15:57:37.00: [ 2003]: RECV FAX: Failure to receive silence.
Jul 17 15:57:37.00: [ 2003]: <-- [9:AT+FTH=3\r]
Jul 17 15:57:37.01: [ 2003]: --> [2:OK]
Jul 17 15:57:37.01: [ 2003]: MODEM input buffering enabled
Jul 17 15:57:37.01: [ 2003]: RECV FAX (00000026): session with +49
xxxxxxxxx
terminated abnormally: Failure to receive silence.
Jul 17 15:57:37.01: [ 2003]: RECV FAX: bin/faxrcvd "recvq/fax00021.tif"
"ttyS0"
"00000026" "Failure to receive silence." "" "" ""
Jul 17 15:57:37.14: [ 2003]: RECV FAX: end
Jul 17 15:57:37.14: [ 2003]: SESSION END
It seems that Hylaxfax has a problem.
Running the PC with W2K and the same fax tool: faxes are received OK at
14400.
With Hylafax it was 12000. After forcing XON/XOFF as with the windoze
fax this
went to 14400.
The "failure to receive silent" message always occurs.
The modem configuration is:
#
ModemType: Class1 # use this to supply a hint
ModemRate: 19200 # rate for DCE-DTE communication
#ModemFlowControl: rtscts # default rtscts
ModemFlowControl: xonxoff # default rtscts
ModemResetCmds: AT&V1
ModemRecvFillOrder: LSB2MSB
ModemSendFillOrder: LSB2MSB
#
#ModemNoFlowCmd: AT&K0 # setup no flow control
#ModemHardFlowCmd: AT&K3 # setup hardware flow control
ModemSoftFlowCmd: AT&K4 # setup software flow control
ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd: !Rockwell
ModemModelQueryCmd: !RC288DPi
ModemRevQueryCmd: ATI3 # product information
#
ModemDialCmd: ATDT0%s # T for tone dialing
Class1Cmd: AT+FCLASS=1
Class1TCFResponseDelay: 75
Class1SendPPMDelay: 75
Class1SendTCFDelay: 75
Class1TrainingRecovery: 1500
Class1RecvAbortOK: 200
Class1FrameOverhead: 4
Class1RecvIdentTimer: 40000
Class1TCFMaxNonZero: 10
Class1TCFMinRun: 1000
Adding the set of Class1....... parameters did not help.
Adding ModemRecvFillOrder did not help.
Note: Before ungrading the PC motherboard etc. I used Hylafax with an
old Creatix LC 288 modem. This unit could not communicate with the
serial port on the new ATX motherboard so I switched to a newer V90 modem.
So I cannot think or find anything else to try. Does anyone have a
suggestion
as to what next to try ?
-- John
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
