Re: [hylafax-users] PCTel faxaddmodem

["Dmitri Colebatch" <dim@colebatch.com>]

> Probing for best speed to talk to modem: 38400 19200 9600 4800 2400 1200
> Unable to deduce DTE-DCE speed; check that you are using the
> correct device and/or that your modem is setup properly.  If
> all else fails, try the -s option to lock the speed.
> [root@mail etc]#

are you sure you've selected the correct device?  I got the same thing when I tried to install my modem as COM1 when infact I had plugged it in as COM2

hth
dim


> 
> 
> I'm running Redhat8.0 and installed hylafax via the available rpm from
> the hylafax site
> 
> [root@mail etc]#lspci -v
> 00:0e.0 Modem: PCTel Inc HSP MicroModem 56 (rev 02) (prog-if 04
> [Hayes/16750])
>         Subsystem: PCTel Inc: Unknown device 0001
>         Flags: stepping, medium devsel, IRQ 5
>         I/O ports at d400 [size=64]
>         Capabilities: [40] Power Management version 2
> 
> 
> In minicom the modem works fine, output is:
> 
> AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
> OK
> AT+FCLASS=?
> 0,1
> OK
> ATI0
> 56000
> OK
> ATI3
> PCtel HSP56 MicroModem Linux Driver V4.27.215 (09-14-2001)
> OK
> 
> Since it is a class 1 modem I copied the class1 file and changed it, see
> attached file for it, and copied it to
> /var/spool/hylafax/etc/config.ttyS15
> 
> Restarted hylafax and he hang again with the speed determination
> 
> Hope somone can help me further.
> 
> Regards,
> 
> Jeroen
> 
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*