[hylafax-users] Help for file corruption

["marco lam" <marco@hintit.com>]

Hi all,

 

I ran into a problem that I always receieved a corrupted file that I can't read the tiff properly.  It can just display less than an inch of the whole tiff.  When I checked the log file, ,it didn't mention any corruption or something.  Could you guys can help for these?  I've been stuck for days to fixing this.  I'm really appreciate if you can help.  Thanks in advance.

 

Very respectfully,

marco.

 

Here're the log:

 

Jun 27 21:17:34.83: [18664]: SESSION BEGIN 00000081 9
Jun 27 21:17:34.83: [18664]: HylaFAX (tm) Version 4.1.2
Jun 27 21:17:34.83: [18664]: <-- [4:ATA\r]
Jun 27 21:17:43.23: [18664]: --> [5:+FCON]
Jun 27 21:17:43.23: [18664]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Jun 27 21:17:43.23: [18664]: RECV FAX: begin
Jun 27 21:17:44.80: [18664]: --> [29:+FTSI: "Fax                 "]
Jun 27 21:17:44.80: [18664]: REMOTE TSI "Fax"
Jun 27 21:17:45.29: [18664]: --> [22:+FDCS: 1,5,0,0,1,0,0,0]
Jun 27 21:17:45.29: [18664]: REMOTE wants 14400 bit/s
Jun 27 21:17:45.29: [18664]: REMOTE wants page width 1728 pixels in 215 mm
Jun 27 21:17:45.29: [18664]: REMOTE wants A4 page length (297 mm)
Jun 27 21:17:45.29: [18664]: REMOTE wants 7.7 line/mm
Jun 27 21:17:45.29: [18664]: REMOTE wants 2-D MR
Jun 27 21:17:45.40: [18664]: --> [2:OK]
Jun 27 21:17:45.40: [18664]: <-- [7:AT+FDR\r]
Jun 27 21:17:48.40: [18664]: --> [5:+FCFR]
Jun 27 21:17:50.51: [18664]: --> [22:+FDCS: 1,5,0,0,1,0,0,0]
Jun 27 21:17:50.51: [18664]: REMOTE wants 14400 bit/s
Jun 27 21:17:50.51: [18664]: REMOTE wants page width 1728 pixels in 215 mm
Jun 27 21:17:50.51: [18664]: REMOTE wants A4 page length (297 mm)
Jun 27 21:17:50.51: [18664]: REMOTE wants 7.7 line/mm
Jun 27 21:17:50.51: [18664]: REMOTE wants 2-D MR
Jun 27 21:17:50.51: [18664]: --> [7:CONNECT]
Jun 27 21:17:50.51: [18664]: RECV: begin page
Jun 27 21:17:50.51: [18664]: RECV: send trigger 021
Jun 27 21:17:50.51: [18664]: <-- data [1]
Jun 27 21:17:56.90: [18664]: RECV: 35 total lines, 0 bad lines, 0 consecutive bad lines
Jun 27 21:17:56.90: [18664]: --> [17:+FPTS: 2,2219,0,0]
Jun 27 21:17:57.41: [18664]: --> [7:+FET: 2]
Jun 27 21:17:57.41: [18664]: RECV recv EOP (no more pages or documents)
Jun 27 21:17:57.52: [18664]: --> [2:OK]
Jun 27 21:17:57.52: [18664]: RECV send MCF (message confirmation)
Jun 27 21:17:57.52: [18664]: RECV FAX (00000081): from Fax, page 1 in 0:12, A4, 7.7 line/mm, 2-D MR, 14400 bit/s
Jun 27 21:17:57.52: [18664]: RECV FAX (00000081): recvq/fax00046.tif from Fax, route to <unspecified>, 1 pages in 0:14
Jun 27 21:17:57.52: [18664]: <-- [7:AT+FDR\r]
Jun 27 21:18:00.57: [18664]: --> [8:+FHNG: 0]
Jun 27 21:18:00.57: [18664]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Jun 27 21:18:00.57: [18664]: RECV FAX: bin/faxrcvd "recvq/fax00046.tif" "ttyS0" "00000081" "" "" ""
Jun 27 21:18:00.78: [18664]: RECV FAX: end
Jun 27 21:18:00.78: [18664]: SESSION END