Re: [hylafax-users] zyxel u-1496e config

["Dan" <dwright@spca.org>]

Aug 29 11:20:21.21: [ 1897]: DELAY 75 ms
Aug 29 11:20:21.29: [ 1897]: <-- [11:AT+FTM=145\r]
Aug 29 11:20:21.75: [ 1897]: --> [10:NO CARRIER]
Aug 29 11:20:21.75: [ 1897]: MODEM No carrier
Aug 29 11:20:21.75: [ 1897]: Problem sending TCF data
Aug 29 11:20:21.75: [ 1897]: <-- [9:AT+FRH=3\r]
Aug 29 11:20:21.76: [ 1897]: --> [5:ERROR]
Aug 29 11:20:21.76: [ 1897]: MODEM Command error

/*
 * Send data using the specified signalling rate.
 */
bool
Class1Modem::transmitData(int br, u_char* data, u_int cc,
    const u_char* bitrev, bool eod)
{
    if (flowControl == FLOW_XONXOFF)
        setXONXOFF(FLOW_XONXOFF, FLOW_NONE, ACT_FLUSH);
    fxStr tmCmd(br, tmCmdFmt);
    bool ok = (atCmd(tmCmd, AT_CONNECT) &&
        sendClass1Data(data, cc, bitrev, eod) &&
        (eod ? waitFor(AT_OK) : true));
    if (flowControl == FLOW_XONXOFF)
        setXONXOFF(FLOW_NONE, FLOW_NONE, ACT_DRAIN);
    return (ok);
}

If any of this makes sense to you, it is very obvious that HylaFAX is only
expecting AT_CONNECT after tmCmd (+FTM), and it looks very much
intentionally programmed this way.

Which leads me to believe that your modem is behaving improperly.  We can
probably hack HylaFAX to accept AT_NOCARRIER, though...

Lee.



modemflowControl on last logs I sent you are:  rtscts  not xonxoff
and sorry I don't understand this stuff at all.
this Zyxel is an older modem that I replaced the firmware in
had to get chips from zyxel themselves.  the firmware is the
latest and probly last for this modem model.

I have the time and would be more than willing to try patches.  rpm would be
easer
but if you give me good instructions or point me to docs ill try.  i have
ben
wanting to lern how to make rpm's anyway.

I have a suggestion I have been watching this list for almost a year and a
half,
you have stated if I remember correctly that you would like to mess with one
of this modems, would you like to trade.  I just want a modem that works
better
than my old hays compatible that takes forever to send faxes.  I posted
about this
in the past finally got all the parts together to upgrade the hole mess.

Dan





____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null