|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] can't receive faxed
Dear All,
I have server-clients(pc-server) hylafax server running in
Turbolinux. It can send fax using the sendfax client installed in a server
to a certain fax machines. I can also send a fax using client TurboLinux
machine only (pc-client) thru server-clients(pc-server) to a certain
dedicated fax. Here's the flow and work fine as discuss above.
e.g.
pc-server(server-client) ---> fax machine
(sendfax -n -d 1234567 /etc/files)
pc-client -----> pc-server(server-client) ----> Fax machine
(dedicated)
(sendfax -n -h pc-server -d 1234567 /etc/files2)
However, if im in fax machine(dedicated) or using the pc-client
hylafax and try to send to the pc-server(server-client) "I can't receive
fax" services. I got error below in my logs. And also below my config file
for /dev/ttyS0. Can anyone point me where I miss something in my
configurations. Thanks!
----------------snoop for error
log----------------------------------------------
Aug 30 09:42:03.19: [ 6729]: SESSION BEGIN 00000050 6325279524
Aug 30 09:42:03.19: [ 6729]: <-- [4:ATA\r]
Aug 30 09:42:11.72: [ 6729]: --> [5:+FCON]
Aug 30 09:42:11.72: [ 6729]: ANSWER: FAX CONNECTION
Aug 30 09:42:11.72: [ 6729]: STATE CHANGE: ANSWERING -> RECEIVING
Aug 30 09:42:11.72: [ 6729]: MODEM input buffering enabled
Aug 30 09:42:11.72: [ 6729]: RECV FAX: begin
Aug 30 09:42:13.35: [ 6729]: --> [29:+FTSI: " 5256193"]
Aug 30 09:42:13.35: [ 6729]: REMOTE TSI "5256193"
Aug 30 09:42:13.67: [ 6729]: --> [22:+FDCS: 1,5,0,2,0,0,0,3]
Aug 30 09:42:13.67: [ 6729]: REMOTE wants 14400 bit/s
Aug 30 09:42:13.67: [ 6729]: REMOTE wants page width 1728 pixels in 215 mm
Aug 30 09:42:13.67: [ 6729]: REMOTE wants unlimited page length
Aug 30 09:42:13.67: [ 6729]: REMOTE wants 7.7 line/mm
Aug 30 09:42:13.67: [ 6729]: REMOTE wants 1-D MR
Aug 30 09:42:13.79: [ 6729]: --> [2:OK]
Aug 30 09:42:13.79: [ 6729]: REJECT TSI "5256193"
Aug 30 09:42:13.79: [ 6729]: RECV FAX (00000050): recvq/fax00007.tif from
5256193, route to <unspecified>, 0 pa
ges in 0:02
Aug 30 09:42:13.79: [ 6729]: RECV FAX: Permission denied (unacceptable
client TSI)
Aug 30 09:42:13.79: [ 6729]: <-- [6:AT+FK\r]
Aug 30 09:42:15.44: [ 6729]: --> [8:+FHNG: 2]
Aug 30 09:42:15.44: [ 6729]: REMOTE HANGUP: Call aborted, from +FK or <CAN>
(code 2)
Aug 30 09:42:16.87: [ 6729]: --> [2:OK]
Aug 30 09:42:16.87: [ 6729]: RECV FAX: bin/faxrcvd "recvq/fax00007.tif"
"ttyS0" "00000050" ""
Aug 30 09:42:16.94: [ 6729]: RECV FAX: end
Aug 30 09:42:16.94: [ 6729]: SESSION END
-----------------end--------------------------------------------------------
-------------
------------------snoop for
config.ttyS0--------------------------------------------------
# $Id: class2,v 1.23 1996/06/24 02:58:32 sam Rel $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names
of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Generic Class 2 modem configuration.
#
# EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
#
CountryCode: 63
AreaCode: 2
FAXNumber: 5279524
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 0xFFF
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "The Dairy Farm Philippines-OSSC"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%p of %%t"
QualifyTSI: etc/tsi
NoCarrierRetrys: 5
PercentGoodLines: 0
MaxConsecutiveBadLines: 0
MaxRecvPages: 25
MaxDials: 3
MaxTries: 3
UUCPLockTimeout: 15
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use this to supply a hint
ModemRate: 19200
ModemFlowControl: rtscts
ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or
not)
#
# We normally append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer. This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
# put it in the ModemDialCmd; e.g. "DT9%s@".
#
ModemDialCmd: ATDT%s@ # T for tone dialing, @ for silence
#
# Other possible configuration stuff. The default strings are
# shown below. Only those that are different from the defaults
# need to be included in the configuration file.
#
ModemResetCmds: "" # stuff to do when modem is reset
ModemAnswerCmd: ATA # use this to answer phone
ModemNoFlowCmd: AT&K # disable flow control cmd
ModemHardFlowCmd: AT&K3 # hardware flow control cmd
ModemSoftFlowCmd: AT&K4 # software flow control cmd
ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
ModemEchoOffCmd: ATE0 # disable command echo
ModemVerboseResultsCmd: ATV1 # enable verbose command results
ModemResultCodesCmd: ATQ0X3 # enable result codes
ModemOnHookCmd: ATH0 # place phone on hook (hangup)
ModemSoftResetCmd: ATZ # do soft reset of modem
ModemWaitTimeCmd: ATS7=60 # wait 60 seconds for carrier
ModemCommaPauseTimeCmd: ATS8=2 # comma pause time is 2 seconds
ModemRecvFillOrder: LSB2MSB # bit order of received facsimile
ModemSendFillOrder: LSB2MSB # bit order modem expects for
transmit
#
# Configuration parameters for Class 2 modems.
#
Class2Cmd: AT+FCLASS=2 # command to enter class 2
Class2BORCmd: AT+FBOR=0 # bit order for phase B/C/D (direct)
Class2RELCmd: AT+FREL=1 # byte-align EOL codes on recv
Class2CQCmd: "" # commands to enable copy quality
proc.
Class2AbortCmd: AT+FK # abort session command
Class2CQQueryCmd: AT+FCQ=? # query for copy quality
capabilities
Class2DCCQueryCmd: AT+FDCC=? # query for modem capabilities
Class2TBCCmd: AT+FTBC=0 # setup stream mode
Class2CRCmd: AT+FCR=1 # enable capability to receive
Class2PHCTOCmd: AT+FPHCTO=30 # set phase C timeout parameter
Class2BUGCmd: AT+FBUG=0 # enable HDLC frame tracing
Class2LIDCmd: AT+FLID # set local identifier command
Class2DCCCmd: AT+FDCC # set modem capabilities command
Class2DISCmd: AT+FDIS # set session parameters command
Class2DDISCmd: "" # disable pre-dial DIS command hack
Class2CIGCmd: AT+FCIG # set polling identifier command
Class2PTSCmd: AT+FPTS # set post-page status command
Class2SPLCmd: AT+FSPL # set polling indicator command
#
# If Class2RecvDataTrigger is not set, then it is set to DC1
#
Class2RecvDataTrigger: "" # character sent to modem to start
recv
Class2XmitWaitForXON: yes # if true, wait for XON before send
----------------------------------------end---------------------------------
----------
Regards
Jay Ungab
Dairy Farm Off-Shore Support Center
2/F, Bank of Philippine Islands Bldg., Muralla St.
Intramuros, Manila, Philippines
Telephone: +63 (2) 525 6152 Extension 229
Fax: +63 (2) 5279622
Email: jungab@dairy-farm.com.ph
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
