|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Blank pages recieved from one sender
I had a problem with a particular senders machine, don't remember what the
model was though. I set RecvDataFormat in my config file to adaptive and it
fixed the problem for me.
Josh
----- Original Message -----
From: "Dag Nygren" <dag@newtech.fi>
To: <hylafax-users@hylafax.org>
Cc: <dag@newtech.fi>
Sent: Monday, August 27, 2001 3:44 AM
Subject: [hylafax-users] Blank pages recieved from one sender
>
> Hi,
>
> I have an annoying problem with one particular
> sender and wonder if anyone would have a clue ?
>
> The problem is that the recieved fax is empty, the number
> of pages are OK, but all are empty.
>
> The sending machine is a Panafax UF585.
>
> The log shows that everything is OK, and that the requested document
> was supposed to be 1 line (!!!).
> OK, there is a missing EOL at the end, but that shouldn't matter,
> should it ?
>
> The setup recieves faxes from all other machines perfectly.....
>
> Like this:
>
> Jun 18 17:31:15.55: [ 884]: SESSION BEGIN 00000807 358xxxxxxxxx
> Jun 18 17:31:15.55: [ 884]: <-- [4:ATA\r]
> Jun 18 17:31:24.57: [ 884]: --> [5:+FCON]
> Jun 18 17:31:24.57: [ 884]: ANSWER: FAX CONNECTION
> Jun 18 17:31:24.57: [ 884]: RECV FAX: begin
> Jun 18 17:31:29.78: [ 884]: --> [28:+FTSI:" +xx xxx xxxxxxx"]
> Jun 18 17:31:29.78: [ 884]: REMOTE TSI "+xx xxx xxxxxxx"
> Jun 18 17:31:29.78: [ 884]: --> [21:+FDCS:0,5,0,2,0,0,0,0]
> Jun 18 17:31:29.78: [ 884]: REMOTE wants 14400 bit/s
> Jun 18 17:31:29.78: [ 884]: REMOTE wants page width 1728 pixels in 215 mm
> Jun 18 17:31:29.78: [ 884]: REMOTE wants unlimited page length
> Jun 18 17:31:29.78: [ 884]: REMOTE wants 3.85 line/mm
> Jun 18 17:31:29.78: [ 884]: REMOTE wants 1-D MR
> Jun 18 17:31:29.78: [ 884]: --> [2:OK]
> Jun 18 17:31:29.78: [ 884]: <-- [7:AT+FDR\r]
> Jun 18 17:31:31.21: [ 884]: --> [5:+FCFR]
> Jun 18 17:31:31.21: [ 884]: --> [28:+FTSI:" xx xxx xxxxxxx+"]
> Jun 18 17:31:31.21: [ 884]: REMOTE TSI "+xx xxx xxxxxxx"
> Jun 18 17:31:31.21: [ 884]: --> [21:+FDCS:0,5,0,2,0,0,0,0]
> Jun 18 17:31:31.21: [ 884]: REMOTE wants 14400 bit/s
> Jun 18 17:31:31.21: [ 884]: REMOTE wants page width 1728 pixels in 215 mm
> Jun 18 17:31:31.21: [ 884]: REMOTE wants unlimited page length
> Jun 18 17:31:31.21: [ 884]: REMOTE wants 3.85 line/mm
> Jun 18 17:31:31.21: [ 884]: REMOTE wants 1-D MR
> Jun 18 17:31:32.13: [ 884]: --> [7:CONNECT]
> Jun 18 17:31:32.13: [ 884]: RECV: begin page
> Jun 18 17:31:32.13: [ 884]: RECV: send trigger 022
> Jun 18 17:31:32.13: [ 884]: <-- data [1]
> Jun 18 17:31:45.72: [ 884]: RECV: 25701 bytes of data, 1126 total lines
> Jun 18 17:31:45.72: [ 884]: --> [18:+FPTS:1,1126,0,0,0]
> Jun 18 17:31:47.11: [ 884]: --> [6:+FET:0]
> Jun 18 17:31:47.11: [ 884]: RECV recv MPS (more pages, same document)
> Jun 18 17:31:47.11: [ 884]: --> [2:OK]
> Jun 18 17:31:47.11: [ 884]: RECV send MCF (message confirmation)
> Jun 18 17:31:47.11: [ 884]: RECV FAX (00000807): from +xx xxx xxxxxx,
page 1
> in 0:18, INF, 3.85 line/mm, 1-D MR
> Jun 18 17:31:47.11: [ 884]: <-- [7:AT+FDR\r]
> Jun 18 17:31:49.68: [ 884]: --> [7:CONNECT]
> Jun 18 17:31:49.68: [ 884]: RECV: begin page
> Jun 18 17:31:49.68: [ 884]: RECV: send trigger 022
> Jun 18 17:31:49.68: [ 884]: <-- data [1]
> Jun 18 17:31:57.92: [ 884]: RECV: 5 bytes of data, 1 total lines
> Jun 18 17:31:57.92: [ 884]: --> [15:+FPTS:1,0,0,0,0]
> Jun 18 17:31:59.17: [ 884]: --> [6:+FET:0]
> Jun 18 17:31:59.17: [ 884]: RECV recv MPS (more pages, same document)
> Jun 18 17:31:59.17: [ 884]: --> [2:OK]
> Jun 18 17:31:59.17: [ 884]: RECV send MCF (message confirmation)
> Jun 18 17:31:59.17: [ 884]: RECV FAX (00000807): from +xx xxx xxxxxx,
page 2
> in 0:12, INF, 3.85 line/mm, 1-D MR
> Jun 18 17:31:59.17: [ 884]: <-- [7:AT+FDR\r]
> Jun 18 17:32:01.89: [ 884]: --> [7:CONNECT]
> Jun 18 17:32:01.89: [ 884]: RECV: begin page
> Jun 18 17:32:01.89: [ 884]: RECV: send trigger 022
> Jun 18 17:32:01.89: [ 884]: <-- data [1]
> Jun 18 17:32:10.48: [ 884]: RECV: 5 bytes of data, 1 total lines
> Jun 18 17:32:10.48: [ 884]: --> [15:+FPTS:1,0,0,0,0]
> Jun 18 17:32:11.73: [ 884]: --> [6:+FET:0]
> Jun 18 17:32:11.73: [ 884]: RECV recv MPS (more pages, same document)
> Jun 18 17:32:11.73: [ 884]: --> [2:OK]
> Jun 18 17:32:11.73: [ 884]: RECV send MCF (message confirmation)
> Jun 18 17:32:11.73: [ 884]: RECV FAX (00000807): from +xx xxx xxxxxx,
page 3
> in 0:12, INF, 3.85 line/mm, 1-D MR
> Jun 18 17:32:11.73: [ 884]: <-- [7:AT+FDR\r]
> Jun 18 17:32:14.15: [ 884]: --> [7:CONNECT]
> Jun 18 17:32:14.15: [ 884]: RECV: begin page
> Jun 18 17:32:14.15: [ 884]: RECV: send trigger 022
> Jun 18 17:32:14.15: [ 884]: <-- data [1]
> Jun 18 17:32:27.73: [ 884]: RECV: 19 bytes of data, 1 total lines
> Jun 18 17:32:29.14: [ 884]: --> [8:+FHNG:91]
> Jun 18 17:32:29.14: [ 884]: REMOTE HANGUP: Missing EOL after 5 seconds
> (section 3.2/T.4) (code 91)
> Jun 18 17:32:29.75: [ 884]: --> [2:OK]
> Jun 18 17:32:29.75: [ 884]: RECV FAX (00000807): recvq/fax00480.tif from
+49
> 821 5034119, route to <unspecified>, 3 pages in 1:05
> Jun 18 17:32:29.75: [ 884]: RECV FAX: Missing EOL after 5 seconds
(section
> 3.2/T.4)
> Jun 18 17:32:29.75: [ 884]: RECV FAX (00000807): session with +xx xxx
xxxxxx
> terminated abnormally: Missing EOL after 5 seconds (section 3.2/T.4)
> Jun 18 17:32:29.75: [ 884]: RECV FAX: bin/faxrcvd "recvq/fax00480.tif"
"ttyS1"
> "00000807" "Missing EOL after 5 seconds (section 3.2/T.4)"
> Jun 18 17:32:30.02: [ 884]: RECV FAX: end
> Jun 18 17:32:30.02: [ 884]: SESSION END
>
> BRGDS
>
>
> --
> Dag Nygren email: dag@newtech.fi
> Oy Espoon NewTech Ab phone: +358 9 8024910
> Träsktorpet 3 fax: +358 9 8024916
> 02360 ESBO Mobile: +358 400 426312
> FINLAND
>
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
> To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
