|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Hylafax Problems while sending facsimiles with a US-Robotics Courier (receiving works fine)
Hi,
I
hope somebody can help me with my Problem or give me a hint.
The
configuration of the usr-courier was made via faxaddmodem, it was
recognised
and I modified the config.ttyS0 to dial over a PBX with modifying
the
FaxClass Command to: atx3+fclass=2.0.
When a fax is coming in the modem
listens and receives the fax.
But when I send a fax I have a strange
problem:
The USR starts dialing, connects with the other machine, they
talk to each
and handle out the specifications but after that goes no data
but comes a
hang up and the fax hasn't been sent.
Then, when the line is
down, faxgetty sends a mail via bin/notify, that the
fax has been
delivered!!
Can anybody help me?
Axel
Here comes the logfile during the connection:
Aug 15
13:40:07.65: [ 5255]: SESSION BEGIN 00000016 49975354155
Aug 15 13:40:07.65:
[ 5255]: SEND FAX: JOB 2 DEST 0975354155 COMMID 00000016
Aug 15 13:40:07.65:
[ 5255]: DELAY 2600 ms
Aug 15 13:40:10.24: [ 5255]: <--
[21:AT&Fx3E0V1Q0X4S0=0H0\r]
Aug 15 13:40:10.43: [ 5255]: -->
[20:AT&Fx3E0V1Q0X4S0=0H0]
Aug 15 13:40:10.43: [ 5255]: -->
[2:OK]
Aug 15 13:40:10.43: [ 5255]: <--
[29:ATS8=2S7=60&H1&R2S13=1&D2&C1\r]
Aug 15 13:40:10.61: [
5255]: --> [2:OK]
Aug 15 13:40:10.61: [ 5255]: <--
[16:atx3+fclass=2.0\r]
Aug 15 13:40:10.66: [ 5255]: --> [2:OK]
Aug 15
13:40:10.66: [ 5255]: <-- [9:AT+FLO=2\r]
Aug 15 13:40:10.71: [ 5255]:
--> [2:OK]
Aug 15 13:40:10.71: [ 5255]: <-- [9:AT+FPP=0\r]
Aug 15
13:40:10.76: [ 5255]: --> [2:OK]
Aug 15 13:40:10.76: [ 5255]: <--
[9:AT+FBO=0\r]
Aug 15 13:40:10.81: [ 5255]: --> [2:OK]
Aug 15
13:40:10.81: [ 5255]: <-- [10:AT+FCT=30\r]
Aug 15 13:40:10.86: [ 5255]:
--> [2:OK]
Aug 15 13:40:10.86: [ 5255]: <--
[15:AT+FNR=1,1,1,0\r]
Aug 15 13:40:10.91: [ 5255]: --> [2:OK]
Aug 15
13:40:10.91: [ 5255]: <-- [9:AT+FIE=0\r]
Aug 15 13:40:10.96: [ 5255]:
--> [2:OK]
Aug 15 13:40:10.96: [ 5255]: <--
[23:AT+FCC=1,5,2,2,0,0,0,0\r]
Aug 15 13:40:11.02: [ 5255]: -->
[2:OK]
Aug 15 13:40:11.02: [ 5255]: <-- [5:ATM1\r]
Aug 15 13:40:11.19:
[ 5255]: --> [2:OK]
Aug 15 13:40:11.19: [ 5255]: <--
[16:atx3+fclass=2.0\r]
Aug 15 13:40:11.34: [ 5255]: --> [2:OK]
Aug 15
13:40:11.34: [ 5255]: <-- [9:AT+FLO=2\r]
Aug 15 13:40:11.49: [ 5255]:
--> [2:OK]
Aug 15 13:40:11.49: [ 5255]: <-- [9:AT+FPP=0\r]
Aug 15
13:40:11.64: [ 5255]: --> [2:OK]
Aug 15 13:40:11.64: [ 5255]: <--
[9:AT+FBO=0\r]
Aug 15 13:40:11.79: [ 5255]: --> [2:OK]
Aug 15
13:40:11.79: [ 5255]: <-- [10:AT+FCT=30\r]
Aug 15 13:40:11.94: [ 5255]:
--> [2:OK]
Aug 15 13:40:11.94: [ 5255]: <--
[15:AT+FNR=1,1,1,0\r]
Aug 15 13:40:12.09: [ 5255]: --> [2:OK]
Aug 15
13:40:12.09: [ 5255]: <-- [9:AT+FIE=0\r]
Aug 15 13:40:12.24: [ 5255]:
--> [2:OK]
Aug 15 13:40:12.24: [ 5255]: <--
[23:AT+FCC=1,5,2,2,0,0,0,0\r]
Aug 15 13:40:12.40: [ 5255]: -->
[2:OK]
Aug 15 13:40:12.40: [ 5255]: <-- [24:AT+FLI="Test"\r]
Aug 15
13:40:12.56: [ 5255]: --> [2:OK]
Aug 15 13:40:12.57: [ 5255]: DIAL
0975354155
Aug 15 13:40:12.57: [ 5255]: <-- [15:ATDT0975354155\r]
Aug
15 13:40:31.51: [ 5255]: --> [4:+FCO]
Aug 15 13:40:34.28: [ 5255]: -->
[27:+FCI:" +49 231 97535455"]
Aug 15 13:40:34.28: [ 5255]: REMOTE CSI "+49
231 97535455"
Aug 15 13:40:34.58: [ 5255]: -->
[20:+FIS:1,3,0,2,1,0,0,5]
Aug 15 13:40:34.58: [ 5255]: --> [2:OK]
Aug
15 13:40:34.58: [ 5255]: REMOTE best rate 9600 bit/s
Aug 15 13:40:34.58: [
5255]: REMOTE max page width 1728 pixels in 215 mm
Aug 15 13:40:34.58: [
5255]: REMOTE max unlimited page length
Aug 15 13:40:34.58: [ 5255]: REMOTE
best vres 7.7 line/mm
Aug 15 13:40:34.58: [ 5255]: REMOTE best format 2-D
MR
Aug 15 13:40:34.58: [ 5255]: REMOTE best 20 ms/scanline
Aug 15
13:40:34.58: [ 5255]: USE 9600 bit/s
Aug 15 13:40:34.58: [ 5255]: USE 20
ms/scanline
Aug 15 13:40:34.58: [ 5255]: <-- [5:ATH0\r]
Aug 15
13:40:34.98: [ 5255]: --> [2:OK]
Aug 15 13:40:34.98: [ 5255]: SESSION
END
#######################
The Modem
Type:
#######################
ati7
USRobotics Courier V.Everything
Configuration Profile...
Product
type Germany
External
Options
HST,V32bis,Terbo,VFC,V34+,x2
Fax
Options Class
1,Class 2.0
Clock
Freq
20.16Mhz
Flash
ROM
512k
Ram
64k
Supervisor date
04/23/97
DSP
date
04/21/97
Supervisor rev
049-7.1.8
DSP
rev
2.2.5
Serial Number
21LRD1H8EESO
########################
The
config.ttyS0:
########################
# $Id: usr-2.0,v 1.2 1999/01/04
10:19:07 robert Exp $
#
# HylaFAX Facsimile Software
#
# Copyright
(c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics,
Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission
to use, copy, modify, distribute, and sell this software and
# its
documentation for any purpose is hereby granted without fee, provided
# that
(i) the above copyright notices and this permission notice appear in
# all
copies of the software and related documentation, and (ii) the names
of
#
Sam Leffler and Silicon Graphics may not be used in any advertising or
#
publicity relating to the software without the specific, prior written
#
permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS
PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR
OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR
SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR
CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF
DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
# Configuration for
using the Class 2.0 command interface
# with a USR v.34 Courier or Sporster
modem.
#
# RTS/CTS flow control is used
default.
#
#
CountryCode:
49
AreaCode:
231
FAXNumber:
+49.231.975324.55
LongDistancePrefix:
0
InternationalPrefix:
00
DialStringRules:
etc/dialrules
ServerTracing:
1
SessionTracing:
11
RecvFileMode:
0666
LogFileMode:
0666
DeviceMode:
0600
RingsBeforeAnswer:
1
SpeakerVolume:
high
GettyArgs:
"-h %l dx_%s"
LocalIdentifier:
"Test"
TagLineFont:
etc/lutRS18.pcf
TagLineFormat:
"From %%l|%c|Page %%p of
%%t"
MaxRecvPages:
25
#
ModemType:
Class2.0 # use class 2.0
interface
ModemRate:
19200 # DCE-DTE
communication rate
ModemFlowControl:
rtscts # Hardware Flow
Control
ModemHardFlowCmd:
AT&H1&R2 # setup modem for hardware flow
control
#ModemSoftFlowCmd:
AT&H2&I2 # setup modem for software
flow
control
ModemSetupDTRCmd:
ATS13=1&D2 # setup so DTR drop resets
modem
ModemSetupDCDCmd:
AT&C1 # setup so
DCD reflects carrier (or
not)
ModemResultCodesCmd:
ATQ0X4 # enable extended
result codes
ModemResetCmds:
AT&Fx3 # stuff to do
when modem is
reset
Class2Cmd:
atx3+fclass=2.0
#
ModemDialCmd:
ATDT%s #T for tone dialing, @ for
silence
ModemSetupAACmd:
AT+FAA=1
ModemSetVolumeCmd: "ATM0 ATM1 ATM1
ATM1
ATM1"
Class2BUGCmd:
AT+FBU=0
Class2CQQueryCmd:
!(0),(0) # override modem
response
Class2NRCmd:
AT+FNR=1,1,1,0
