Re: [hylafax-users] (No subject)Cc: "'hylafax-users@hylafax.org'" <hylafax-users@hylafax.org>

[Lee Howard <faxguy@deanox.com>]

At 01:26 PM 8/2/01 +0800, Jay Ungab wrote:

First off, you *should* be using rockwell-k56 prototype rather than
whatever you did to create your config file.  (See below)

....
>ModemType:              Class2          # use this to supply a hint
>ModemRate:              19200           # max rate for DCE-DTE communication
>ModemFlowControl:       xonxoff         # XON/XOFF flow control assumed
>ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem

I'm not sure, but I think that &D3 is the right value here.

....
>ModemResetCmds:         ""              # stuff to do when modem is reset
>ModemAnswerCmd:         ATA             # use this to answer phone
>ModemNoFlowCmd:         AT&K            # disable flow control cmd
>ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
>ModemSoftFlowCmd:       AT&K4           # software flow control cmd
>ModemNoAutoAnswerCmd:   ATS0=0          # disable auto-answer

I think that S0=0 is default, so no need to have it in your config.

....
>ModemSetVolumeCmd:      "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
>ModemEchoOffCmd:        ATE0            # disable command echo
>ModemVerboseResultsCmd: ATV1            # enable verbose command results
>ModemResultCodesCmd:    ATQ0            # enable result codes
>ModemOnHookCmd:         ATH0            # place phone on hook (hangup)
>ModemSoftResetCmd:      ATZ             # do soft reset of modem
>ModemWaitTimeCmd:       ATS7=60         # wait 60 seconds for carrier
>ModemCommaPauseTimeCmd: ATS8=2          # comma pause time is 2 seconds

Again, I think that all of this is default.

>ModemRecvFillOrder:     LSB2MSB         # bit order of received facsimile

Traditionally, MultiTechs require MSB2LSB.

....
(skip more default config items)
....
>============================================================================
>===============
>	This is the log I got when running probemodem ttyS0.
>
>[root@puppy log]# probemodem ttyS0
>
>Now we are going to probe the tty port.  This takes a few seconds,
>so be patient.  Note that if you do not have the modem cabled to
>the port, or the modem is turned off, this may hang (just go and
>cable up the modem or turn it on, or whatever).
>
>Probing for best speed to talk to modem: 38400 OK.
>[1]+  Terminated              ( trap 0 1 2 15; while true; do
>    sleep 10; echo ""; echo "Hmm, something seems to be hung, check your
>modem eh?";
>done )

This is harmless and has been fixed in CVS.

>ATI0    RESULT = "OK"   RESPONSE = "MT5600ZDX"
>ATI3    RESULT = "OK"   RESPONSE = "V2.300-V90_2M_DLS"
>AT+FMDL?        RESULT = "OK"   RESPONSE = "MultiModemZDX"
>AT+FMFR?        RESULT = "OK"   RESPONSE = "Rockwell"

You probably should be using the rc288dpi-1 config file for Class 1 and the
rockwell-k56 for Class 2.  See the patch below, apply it to your config
directory, and then re-run faxaddmodem.  If this doesn't work, then let me
know.  Please try both fax Classes.

Lee.

diff -Nru hylafax.orig/config/rc288dpi-1 hylafax/config/rc288dpi-1
--- hylafax.orig/config/rc288dpi-1	Fri Jul 20 16:05:41 2001
+++ hylafax/config/rc288dpi-1	Thu Aug  2 13:23:05 2001
@@ -40,6 +40,7 @@
 # CONFIG:CLASS1:28800:.*:.*: Manufacturer=ROCKWELL Model=RC288DPi
 # CONFIG:CLASS1:33600:.*:.*: Manufacturer=Rockwell Model=33600
 # CONFIG:CLASS1:56000:.*:.*: Manufacturer=Rockwell/Conexant Model=AC/K56
+# CONFIG:CLASS1:MT5600ZDX:.*:.*: Manufacturer=MultiTech Model=MT5600ZDX
 #
 # BEGIN-SERVER
 # END-SERVER
diff -Nru hylafax.orig/config/rockwell-k56 hylafax/config/rockwell-k56
--- hylafax.orig/config/rockwell-k56	Fri Jul 20 16:05:41 2001
+++ hylafax/config/rockwell-k56	Thu Aug  2 13:19:06 2001
@@ -41,7 +41,7 @@
 # to force the server to skip intermediate status messages and
 # wait for the "CONNECT" message.
 #
-# CONFIG: CLASS2: Rockwell-MultiModemZDXV-*
+# CONFIG: CLASS2: Rockwell-MultiModemZDX*-*
 # CONFIG: CLASS2: ROCKWELL-AC/K56*-*
 #
 # BEGIN-SERVER




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null