Re: [hylafax-users] Distinctive ring & cid looging

["Network" <network@network.shacknet.nu>]

Is anyone using HylaFAX to totally ignore incoming voice calls on the primary
number -and- answer (accept) incoming fax calls on the secondary/distinctive
ring number?  If so, is the cid-data from the incoming calls on the
secondary/distinctive ring number getting logged (via syslogd) to the servers
log file?

ServerTracing:          1
SessionTracing:         0xfff
RingsBeforeAnswer:      4               <-- I have tried 2 - 4 with no luck
LogFacility:            daemon
RingFax:                RING1            <-- have tried RING0-4 with no luck
CIDNumber:              "NMBR = "
CIDName:                "NAME = "

> > > > Our set-up is ....
> > > > One phone line with primary and secondary numbers (one pair of wires)
> > > > hylafax is configured to only answer/pick-up on the secondary line via,
> > > > RingFax:                RING1
> > > > However. hylafax will and faithfully does log cnid data from the primary
> > > > number/ring -and- will *not* see/log any cnid data from the secondary
> number
> > > > which hylafax answers in order to receive a fax.  We also use hylafax to
> > send
> > > > faxes :))  That's all we use hylafax for.  Nothing else.
> > >
> > > Ok.  I suspect, but cannot prove without checking, that FaxGetty
> > > wouldn't log the CNID for any call it wasn't going to answer.
> >
> MR. JRA., Dear sir;  :)
> What you stated above is in fact being done and working.  Hylafax and/ or
> faxgetty is logging the cnid data on the voice line= primary number.
> hylafax/faxgetty is *not* seeing/logging any cid-data from incoming calls on
the
> secondary/distictive ring number which it answers and receives faxes on.  :o)
>
> > >
> > > Try *changing* RingFax to RING2, restarting everything, and seeing if
> > > you now get CNID logged only on *that* ring's calls.
>
> I'm sorry sir, this too doesn't solve the current problem.  BTW, do you
remember
> me stating; I had juggled or tried various ring_strings in the past for
RingFax?
> In any case it didn't work then.  I have switched it again (as-per your
> suggestion)= not working now.
> -
>  This is a healthy discussion on this issue however, I'm getting the consensus
>  that this hasn't been tested with distinctive ring (cid-data logging).
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null