[hylafax-users] Help??

To: Hylafax Users <hylafax-users@hylafax.org>
Subject: [hylafax-users] Help??
From: Odhiambo Washington <wash@iconnect.co.ke>
Date: Fri, 15 Dec 2000 10:51:40 +0300

Hi,
Please allow me to request assistance with HylaFAX. I think there is something that is weird/not correctly set in my modem config file.
I am having some problems with HylaFAX which I am not able to resolve. I also don't seem to find them in the archives.
The modem dials and starts to send but when I tail the log file I see it getting stuck at the point when it wants 
to send the end page.

I am attaching TWo files, one sample log (the problem occurs with all numbers it dials) and one file from
../../fax/info/
I am using USR 56K External modem.

Thank you for all the help.

####
supportsHighRes:yes
supports2DEncoding:no
supportsPostScript:no
calledBefore:yes
maxPageWidth:1728
maxPageLength:-1
maxSignallingRate:"9600"
minScanlineTime:"20ms/10ms"
remoteCSI:"254 02 718418"
sendFailures:3
lastSendFailure:"Unspecified Transmit Phase C error; Giving up after 3 attempts to send same page"
dialFailures:0
&pagingProtocol:"ixo"
###



And here is the log file...

Dec 15 09:28:35.22: [26794]: SESSION BEGIN 00000044 2542340939
Dec 15 09:28:35.22: [26794]: SEND FAX: JOB 11 DEST +2542340939 COMMID 00000044
Dec 15 09:28:35.22: [26794]: DELAY 2600 ms
Dec 15 09:28:37.83: [26794]: <-- [15:ATE0V1Q0S0=0H0\r]
Dec 15 09:28:37.97: [26794]: --> [2:OK]
Dec 15 09:28:37.97: [26794]: <-- [21:ATS8=2S7=60&K3&D2&C1\r]
Dec 15 09:28:38.11: [26794]: --> [2:OK]
Dec 15 09:28:38.11: [26794]: <-- [12:AT+FCLASS=1\r]
Dec 15 09:28:38.25: [26794]: --> [2:OK]
Dec 15 09:28:38.25: [26794]: <-- [7:ATL0M1\r]
Dec 15 09:28:38.38: [26794]: --> [2:OK]
Dec 15 09:28:38.38: [26794]: <-- [12:AT+FCLASS=1\r]
Dec 15 09:28:38.63: [26794]: --> [2:OK]
Dec 15 09:28:38.63: [26794]: DIAL 02340939
Dec 15 09:28:38.63: [26794]: <-- [14:ATDT02340939@\r]
Dec 15 09:28:58.24: [26794]: --> [7:CONNECT]
Dec 15 09:29:00.57: [26794]: --> [2:OK]
Dec 15 09:29:00.57: [26794]: <-- [9:AT+FRH=3\r]
Dec 15 09:29:00.58: [26794]: --> [7:CONNECT]
Dec 15 09:29:01.32: [26794]: --> [2:OK]
Dec 15 09:29:01.32: [26794]: REMOTE CSI "+25402340939"
Dec 15 09:29:01.32: [26794]: <-- [9:AT+FRH=3\r]
Dec 15 09:29:01.33: [26794]: --> [7:CONNECT]
Dec 15 09:29:01.62: [26794]: --> [2:OK]
Dec 15 09:29:01.62: [26794]: REMOTE best rate 9600 bit/s
Dec 15 09:29:01.62: [26794]: REMOTE max page width 1728 pixels in 215 mm
Dec 15 09:29:01.62: [26794]: REMOTE max unlimited page length 
Dec 15 09:29:01.62: [26794]: REMOTE best vres 7.7 line/mm
Dec 15 09:29:01.62: [26794]: REMOTE best format 2-D MR
Dec 15 09:29:01.62: [26794]: REMOTE supports T.30 Annex A, ECM
Dec 15 09:29:01.62: [26794]: REMOTE best 5 ms/scanline
Dec 15 09:29:01.62: [26794]: USE 9600 bit/s
Dec 15 09:29:01.62: [26794]: USE 5 ms/scanline
Dec 15 09:29:01.62: [26794]: SEND file "docq/doc23.ps;31"
Dec 15 09:29:01.62: [26794]: USE page width 1728 pixels in 215 mm
Dec 15 09:29:01.62: [26794]: USE unlimited page length 
Dec 15 09:29:01.62: [26794]: USE 7.7 line/mm
Dec 15 09:29:01.62: [26794]: USE 1-D MR
Dec 15 09:29:01.62: [26794]: SEND training at v.29 9600 bit/s
Dec 15 09:29:01.62: [26794]: <-- [9:AT+FTH=3\r]
Dec 15 09:29:01.80: [26794]: --> [7:CONNECT]
Dec 15 09:29:01.80: [26794]: <-- data [23]
Dec 15 09:29:01.80: [26794]: <-- data [2]
Dec 15 09:29:01.82: [26794]: --> [7:CONNECT]
Dec 15 09:29:01.82: [26794]: <-- data [6]
Dec 15 09:29:01.82: [26794]: <-- data [2]
Dec 15 09:29:03.78: [26794]: --> [2:OK]
Dec 15 09:29:03.78: [26794]: DELAY 75 ms
Dec 15 09:29:03.87: [26794]: <-- [10:AT+FTM=96\r]
Dec 15 09:29:04.18: [26794]: --> [7:CONNECT]
Dec 15 09:29:04.18: [26794]: <-- data [1024]
Dec 15 09:29:04.18: [26794]: <-- data [776]
Dec 15 09:29:04.18: [26794]: <-- data [2]
Dec 15 09:29:05.71: [26794]: --> [2:OK]
Dec 15 09:29:05.71: [26794]: <-- [9:AT+FRH=3\r]
Dec 15 09:29:06.49: [26794]: --> [7:CONNECT]
Dec 15 09:29:07.54: [26794]: --> [2:OK]
Dec 15 09:29:07.54: [26794]: TRAINING succeeded
Dec 15 09:29:07.54: [26794]: <-- [10:AT+FTM=96\r]
Dec 15 09:29:07.89: [26794]: --> [7:CONNECT]
Dec 15 09:29:07.89: [26794]: SEND begin page
Dec 15 09:29:07.89: [26794]: <-- data [1030]
Dec 15 09:29:07.89: [26794]: <-- data [1025]
Dec 15 09:29:07.89: [26794]: <-- data [1028]
Dec 15 09:29:07.89: [26794]: <-- data [1025]
Dec 15 09:29:07.89: [26794]: <-- data [1032]
Dec 15 09:29:08.87: [26794]: <-- data [1029]
Dec 15 09:29:08.87: [26794]: <-- data [1024]
Dec 15 09:29:08.87: [26794]: <-- data [1029]
Dec 15 09:29:08.87: [26794]: <-- data [1029]
Dec 15 09:29:09.93: [26794]: <-- data [1026]
Dec 15 09:29:09.93: [26794]: <-- data [1030]
Dec 15 09:29:09.93: [26794]: <-- data [1033]
Dec 15 09:29:09.93: [26794]: <-- data [652]
Dec 15 09:29:11.00: [26794]: SENT 12935 bytes of data
Dec 15 09:29:11.00: [26794]: <-- data [1034]
Dec 15 09:29:11.00: [26794]: <-- data [1034]
Dec 15 09:29:11.00: [26794]: <-- data [1026]
Dec 15 09:29:11.00: [26794]: <-- data [1024]
Dec 15 09:29:12.06: [26794]: <-- data [1024]
Dec 15 09:29:12.06: [26794]: <-- data [1026]
Dec 15 09:29:12.06: [26794]: <-- data [1027]
Dec 15 09:29:12.06: [26794]: <-- data [1024]
Dec 15 09:29:13.13: [26794]: <-- data [1028]
Dec 15 09:29:13.13: [26794]: <-- data [1027]
Dec 15 09:29:13.13: [26794]: <-- data [1028]
Dec 15 09:29:13.13: [26794]: <-- data [1026]
Dec 15 09:29:14.19: [26794]: <-- data [601]
Dec 15 09:29:14.19: [26794]: SENT 12888 bytes of data
Dec 15 09:29:14.20: [26794]: <-- data [1028]
Dec 15 09:29:14.20: [26794]: <-- data [1024]
Dec 15 09:29:14.20: [26794]: <-- data [1026]
Dec 15 09:29:15.26: [26794]: <-- data [1029]
Dec 15 09:29:15.26: [26794]: <-- data [1024]
Dec 15 09:29:15.26: [26794]: <-- data [1025]
Dec 15 09:29:15.26: [26794]: <-- data [1029]
Dec 15 09:29:16.32: [26794]: <-- data [1028]
Dec 15 09:29:16.32: [26794]: <-- data [1025]
Dec 15 09:29:16.33: [26794]: <-- data [1028]
Dec 15 09:29:16.33: [26794]: <-- data [1024]
Dec 15 09:29:17.39: [26794]: <-- data [661]
Dec 15 09:29:17.39: [26794]: SENT 11925 bytes of data
Dec 15 09:29:17.39: [26794]: SEND 1D RTC
Dec 15 09:29:17.39: [26794]: <-- data [29]
Dec 15 09:29:17.39: [26794]: <-- data [2]
Dec 15 09:29:17.39: [26794]: SEND end page
Dec 15 09:30:37.40: [26794]: <-- [9:AT+FTH=3\r]
Dec 15 09:30:39.96: [26794]: --> [0:]
Dec 15 09:30:39.96: [26794]: <-- [5:ATH0\r]
Dec 15 09:30:44.97: [26794]: MODEM <Timeout>
Dec 15 09:30:44.97: [26794]: SESSION END



-Wash

--
Odhiambo Washington  Inter-Connect Ltd.,
wash@iconnect.co.ke  5th Flr Furaha Plaza
Tel: 254 11 222604   Nkrumah Rd.,
Fax: 254 11 222636   PO Box 83613 MOMBASA, KE.

And now for something completely the same. 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

Follow-Ups:
- Re: [hylafax-users] Help??
  - From: "Paul A. Franz, P.E." <paul@eucleides.com>

Prev by Date: Re: [hylafax-users] Unspecified Transmit Phase C error
Next by Date: Re: [hylafax-users] Help??
Prev by thread: [hylafax-users] Sending Attachments through Netscape
Next by thread: Re: [hylafax-users] Help??
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services