|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Help??
You declined to state your version of HylaFAX and libtiff. This sounds like
an incompatible libtiff problem.
At 11:51 PM 12/14/2000Odhiambo Washington sez:
>Hi,
>Please allow me to request assistance with HylaFAX. I think there is
>something that is weird/not correctly set in my modem config file.
>I am having some problems with HylaFAX which I am not able to resolve. I
>also don't seem to find them in the archives.
>The modem dials and starts to send but when I tail the log file I see it
>getting stuck at the point when it wants
>to send the end page.
>
>I am attaching TWo files, one sample log (the problem occurs with all
>numbers it dials) and one file from
>../../fax/info/
>I am using USR 56K External modem.
>
>Thank you for all the help.
>
>####
>supportsHighRes:yes
>supports2DEncoding:no
>supportsPostScript:no
>calledBefore:yes
>maxPageWidth:1728
>maxPageLength:-1
>maxSignallingRate:"9600"
>minScanlineTime:"20ms/10ms"
>remoteCSI:"254 02 718418"
>sendFailures:3
>lastSendFailure:"Unspecified Transmit Phase C error; Giving up after 3
>attempts to send same page"
>dialFailures:0
>&pagingProtocol:"ixo"
>###
>
>
>
>And here is the log file...
>
>Dec 15 09:28:35.22: [26794]: SESSION BEGIN 00000044 2542340939
>Dec 15 09:28:35.22: [26794]: SEND FAX: JOB 11 DEST +2542340939 COMMID 00000044
>Dec 15 09:28:35.22: [26794]: DELAY 2600 ms
>Dec 15 09:28:37.83: [26794]: <-- [15:ATE0V1Q0S0=0H0\r]
>Dec 15 09:28:37.97: [26794]: --> [2:OK]
>Dec 15 09:28:37.97: [26794]: <-- [21:ATS8=2S7=60&K3&D2&C1\r]
>Dec 15 09:28:38.11: [26794]: --> [2:OK]
>Dec 15 09:28:38.11: [26794]: <-- [12:AT+FCLASS=1\r]
>Dec 15 09:28:38.25: [26794]: --> [2:OK]
>Dec 15 09:28:38.25: [26794]: <-- [7:ATL0M1\r]
>Dec 15 09:28:38.38: [26794]: --> [2:OK]
>Dec 15 09:28:38.38: [26794]: <-- [12:AT+FCLASS=1\r]
>Dec 15 09:28:38.63: [26794]: --> [2:OK]
>Dec 15 09:28:38.63: [26794]: DIAL 02340939
>Dec 15 09:28:38.63: [26794]: <-- [14:ATDT02340939@\r]
>Dec 15 09:28:58.24: [26794]: --> [7:CONNECT]
>Dec 15 09:29:00.57: [26794]: --> [2:OK]
>Dec 15 09:29:00.57: [26794]: <-- [9:AT+FRH=3\r]
>Dec 15 09:29:00.58: [26794]: --> [7:CONNECT]
>Dec 15 09:29:01.32: [26794]: --> [2:OK]
>Dec 15 09:29:01.32: [26794]: REMOTE CSI "+25402340939"
>Dec 15 09:29:01.32: [26794]: <-- [9:AT+FRH=3\r]
>Dec 15 09:29:01.33: [26794]: --> [7:CONNECT]
>Dec 15 09:29:01.62: [26794]: --> [2:OK]
>Dec 15 09:29:01.62: [26794]: REMOTE best rate 9600 bit/s
>Dec 15 09:29:01.62: [26794]: REMOTE max page width 1728 pixels in 215 mm
>Dec 15 09:29:01.62: [26794]: REMOTE max unlimited page length
>Dec 15 09:29:01.62: [26794]: REMOTE best vres 7.7 line/mm
>Dec 15 09:29:01.62: [26794]: REMOTE best format 2-D MR
>Dec 15 09:29:01.62: [26794]: REMOTE supports T.30 Annex A, ECM
>Dec 15 09:29:01.62: [26794]: REMOTE best 5 ms/scanline
>Dec 15 09:29:01.62: [26794]: USE 9600 bit/s
>Dec 15 09:29:01.62: [26794]: USE 5 ms/scanline
>Dec 15 09:29:01.62: [26794]: SEND file "docq/doc23.ps;31"
>Dec 15 09:29:01.62: [26794]: USE page width 1728 pixels in 215 mm
>Dec 15 09:29:01.62: [26794]: USE unlimited page length
>Dec 15 09:29:01.62: [26794]: USE 7.7 line/mm
>Dec 15 09:29:01.62: [26794]: USE 1-D MR
>Dec 15 09:29:01.62: [26794]: SEND training at v.29 9600 bit/s
>Dec 15 09:29:01.62: [26794]: <-- [9:AT+FTH=3\r]
>Dec 15 09:29:01.80: [26794]: --> [7:CONNECT]
>Dec 15 09:29:01.80: [26794]: <-- data [23]
>Dec 15 09:29:01.80: [26794]: <-- data [2]
>Dec 15 09:29:01.82: [26794]: --> [7:CONNECT]
>Dec 15 09:29:01.82: [26794]: <-- data [6]
>Dec 15 09:29:01.82: [26794]: <-- data [2]
>Dec 15 09:29:03.78: [26794]: --> [2:OK]
>Dec 15 09:29:03.78: [26794]: DELAY 75 ms
>Dec 15 09:29:03.87: [26794]: <-- [10:AT+FTM=96\r]
>Dec 15 09:29:04.18: [26794]: --> [7:CONNECT]
>Dec 15 09:29:04.18: [26794]: <-- data [1024]
>Dec 15 09:29:04.18: [26794]: <-- data [776]
>Dec 15 09:29:04.18: [26794]: <-- data [2]
>Dec 15 09:29:05.71: [26794]: --> [2:OK]
>Dec 15 09:29:05.71: [26794]: <-- [9:AT+FRH=3\r]
>Dec 15 09:29:06.49: [26794]: --> [7:CONNECT]
>Dec 15 09:29:07.54: [26794]: --> [2:OK]
>Dec 15 09:29:07.54: [26794]: TRAINING succeeded
>Dec 15 09:29:07.54: [26794]: <-- [10:AT+FTM=96\r]
>Dec 15 09:29:07.89: [26794]: --> [7:CONNECT]
>Dec 15 09:29:07.89: [26794]: SEND begin page
>Dec 15 09:29:07.89: [26794]: <-- data [1030]
>Dec 15 09:29:07.89: [26794]: <-- data [1025]
>Dec 15 09:29:07.89: [26794]: <-- data [1028]
>Dec 15 09:29:07.89: [26794]: <-- data [1025]
>Dec 15 09:29:07.89: [26794]: <-- data [1032]
>Dec 15 09:29:08.87: [26794]: <-- data [1029]
>Dec 15 09:29:08.87: [26794]: <-- data [1024]
>Dec 15 09:29:08.87: [26794]: <-- data [1029]
>Dec 15 09:29:08.87: [26794]: <-- data [1029]
>Dec 15 09:29:09.93: [26794]: <-- data [1026]
>Dec 15 09:29:09.93: [26794]: <-- data [1030]
>Dec 15 09:29:09.93: [26794]: <-- data [1033]
>Dec 15 09:29:09.93: [26794]: <-- data [652]
>Dec 15 09:29:11.00: [26794]: SENT 12935 bytes of data
>Dec 15 09:29:11.00: [26794]: <-- data [1034]
>Dec 15 09:29:11.00: [26794]: <-- data [1034]
>Dec 15 09:29:11.00: [26794]: <-- data [1026]
>Dec 15 09:29:11.00: [26794]: <-- data [1024]
>Dec 15 09:29:12.06: [26794]: <-- data [1024]
>Dec 15 09:29:12.06: [26794]: <-- data [1026]
>Dec 15 09:29:12.06: [26794]: <-- data [1027]
>Dec 15 09:29:12.06: [26794]: <-- data [1024]
>Dec 15 09:29:13.13: [26794]: <-- data [1028]
>Dec 15 09:29:13.13: [26794]: <-- data [1027]
>Dec 15 09:29:13.13: [26794]: <-- data [1028]
>Dec 15 09:29:13.13: [26794]: <-- data [1026]
>Dec 15 09:29:14.19: [26794]: <-- data [601]
>Dec 15 09:29:14.19: [26794]: SENT 12888 bytes of data
>Dec 15 09:29:14.20: [26794]: <-- data [1028]
>Dec 15 09:29:14.20: [26794]: <-- data [1024]
>Dec 15 09:29:14.20: [26794]: <-- data [1026]
>Dec 15 09:29:15.26: [26794]: <-- data [1029]
>Dec 15 09:29:15.26: [26794]: <-- data [1024]
>Dec 15 09:29:15.26: [26794]: <-- data [1025]
>Dec 15 09:29:15.26: [26794]: <-- data [1029]
>Dec 15 09:29:16.32: [26794]: <-- data [1028]
>Dec 15 09:29:16.32: [26794]: <-- data [1025]
>Dec 15 09:29:16.33: [26794]: <-- data [1028]
>Dec 15 09:29:16.33: [26794]: <-- data [1024]
>Dec 15 09:29:17.39: [26794]: <-- data [661]
>Dec 15 09:29:17.39: [26794]: SENT 11925 bytes of data
>Dec 15 09:29:17.39: [26794]: SEND 1D RTC
>Dec 15 09:29:17.39: [26794]: <-- data [29]
>Dec 15 09:29:17.39: [26794]: <-- data [2]
>Dec 15 09:29:17.39: [26794]: SEND end page
>Dec 15 09:30:37.40: [26794]: <-- [9:AT+FTH=3\r]
>Dec 15 09:30:39.96: [26794]: --> [0:]
>Dec 15 09:30:39.96: [26794]: <-- [5:ATH0\r]
>Dec 15 09:30:44.97: [26794]: MODEM <Timeout>
>Dec 15 09:30:44.97: [26794]: SESSION END
>
>
>
>-Wash
>
>--
>Odhiambo Washington Inter-Connect Ltd.,
>wash@iconnect.co.ke 5th Flr Furaha Plaza
>Tel: 254 11 222604 Nkrumah Rd.,
>Fax: 254 11 222636 PO Box 83613 MOMBASA, KE.
>
>And now for something completely the same.
>
>
>____________________ HylaFAX(tm) Users Mailing List _______________________
> To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
Paul Franz
PAF Consulting Engineers | 427 - 140th Ave NE
(425)641-8202 voice | Bellevue, WA 98005
(801)749-8480 fax | <http://blackdog.bellevue.wa.us/>
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
