Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] newbie questions



At 03:10 PM 11/1/00 -0500, Eric Wood wrote:
>Hello,
>I'm struggling over a couple of things:
>
>1. I sent a test fax using "sendfax -n -d 2977186 /etc/passwd/" and I'm
>using a generic class 2.0 config file, generic modem, RH 7.0:

There is no such thing as "generic" in either case.  You've got to be
specific.
HylaFAX works fine in RH7.0.  The current RPM is a bit naggy on the
install, but all is well regardless.

[snip...]
>Mar 08 12:44:50.14: [ 8445]: <-- [14:AT+FCLASS=2.0\r]
>Mar 08 12:44:50.28: [ 8445]: --> [2:OK]
>Mar 08 12:44:50.28: [ 8445]: <-- [9:AT+FLO=0\r]
>Mar 08 12:44:50.42: [ 8445]: --> [2:OK]

Generally speaking, use Class 1 if you have a USR modem.  And it would be
very rare that FlowControl should be set to None (which you have).

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services