Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] newbie questions



I edited my config.ttyS1 file so that hardware flow control is used.  The
log file now proves it:
Mar 08 14:03:25.32: [ 9161]: <-- [9:AT+FLO=2\r]
Mar 08 14:03:25.56: [ 9161]: --> [2:OK]

However, the bottom half the faxes file are "squished" when it comes out of
the fax machine.  The command "ls -l /etc | sendfax -n -d 2977186" makes the
top half of every page good and the bottom half is squished.  Only pages 2
of 5 made it through and log file shows:

Mar 08 14:56:02.42: [ 9810]: REMOTE HANGUP: Unspecified Transmit Phase D
error,
including +FPHCTO timeout between data and +FET command (code 50)


I'm going to abandon this internal modem and go with an external Multitech
and see if I have these same problems.

=eric wood

FYI, I'd stay away from this modem:

atz
OK
ati3
Texas Instruments RK 56000 Voice Fax Rev. 05.A.30
ati7
Configuration Profile...

Product type           US/Canada Internal
Product ID:            00178500
Options                V32bis,V.34+,x2,V.90
Fax Options            Class 1/Class 2.0
Line Options           Caller ID, Distinctive Ring
Voice Options          Speakerphone, TAD
Clock Freq             92.0Mhz
EPROM                  256k
RAM                    32k

FLASH date             2/9/98
FLASH rev              4.7.29

DSP date               2/9/98
DSP rev                4.7.29




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services