Re: [hylafax-users] Connecting External USR v.90 modem

[Lee Howard <faxguy@deanox.com>]

Sep 27 19:15:13.94: [ 1437]: <-- [14:AT+FCLASS=2.0\r]
Sep 27 19:15:14.08: [
1437]: --> [2:OK]

There's a growing consensus on this list that USR modems should be used
(and most modems generally) in Class 1.  You'll have less trouble,
generally speaking.  (Yes, we know that the default in faxaddmodem is for
it to use 2.0.)

Sep 27 19:15:17.43: [ 1437]: DIAL 2444754
Sep 27 19:15:17.43: [ 1437]: <--
[12:ATDT2444754\r]
Sep 27 19:15:35.21: [ 1437]: --> [4:+FCO]
Sep 27
19:15:37.83: [ 1437]: --> [12:+FNF:­6@€D
ð]
Sep 27 19:15:37.84: [ 1437]:
REMOTE NSF "­6@€D
ð"
Sep 27 19:15:37.84: [ 1437]: NSF remote fax equipment:
unknown 

What is that supposed to mean? (I don't expect you to answer.)

Sep 27 19:15:48.11: [ 1437]: <-- data [9]
Sep 27 19:15:48.11: [ 1437]: SEND
end page
Sep 27 19:15:48.11: [ 1437]: SEND send EOP (no more pages or
documents)
Sep 27 19:15:48.11: [ 1437]: <-- data [2]
Sep 27 19:18:48.10: [
1437]: REMOTE HANGUP: Unspecified Transmit Phase D error, including +FPHCTO
timeout between data and +FET command (code 50)
Sep 27 19:18:48.11: [
1437]: <-- [7:AT+FKS\r]

We can't see the error in the logs because the logging sensitivity isn't
high enough.  In your config file change SessionTracing to 0xFFF and then
send the log again.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null