[hylafax-users] Re: last ditch effort

["Bernd Proissl" <news@proissl.de>]

> Hello!
> Our hylafax-4.1beta2-5rh6 on RedHat 6.2 & Digi Acceleport RAS 8 boards,
> newest libtiff etc. runs fine, but when we uncomment the config line:
> 
> ModemDialCmd:          ATDT0,%s@
> 
> so our users don't have to dial 0 to get through our PBX, the logs show
if you uncomment "atdt0" then you users do not have to dial 0?

maybe your problem is that your modem does not recognize the dialtone
of your pbx (in contrast to the dialtone of you phone company)
and reports BUSY in this situation.

have a look at your modem manual
try to add X3 to your dial command

Bernd

> "BUSY SIGNAL DETECTED" after ATDT0...  The same problem when we 
> simply leave
> 
> ModemDialCmd:          ATDT%s@
> 
> Trace looks like this.
> [...]
> Jul 14 14:20:02.19: [ 1376]: DIAL 1309
> Jul 14 14:20:02.19: [ 1376]: <-- [10:ATDT1309@\r]
> Jul 14 14:21:12.42: [ 1376]: --> [4:BUSY]
> Jul 14 14:21:12.42: [ 1376]: SEND FAILED: Busy signal detected
> [...]
> 
> It only works when we leave this config line commented out, and then the
> trace looks like:
> 
> [...]
> Jul 14 14:54:56.88: [  861]: DIAL 1309
> Jul 14 14:54:56.88: [  861]: <-- [13:ATDT1309\r]
> Jul 14 14:55:11.44: [  861]: --> [4:+FCO]
> [...]
> 
>  And of course, the fax we're trying to connect is NOT busy.
> 
> Thanks in advance for your help.
> Christian
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org 
> < /dev/null
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null