flexfax: Trouble receiving Faxes with Elsa Microlink 56k Basic Modem

["Karlheinz Blank" <schnuddelhut@web.de>]

Hi,

in near future I'll get trouble - cause I'm sitting every night in front of my computer trying to get that following running :-(

- Suse 6.4
- Hylafax 4.1 beta 2
- Elsa Microlink 56k basic

I'm running faxaddmodem with defining the modem either as Class 1, 2 or 2.0 type.
But if I receive a fax, the modem connects - exchanges the FAX-Device-IDs from and to the sending fax-machine - and nothing happens til the sending fax hangs up with an error.

I increased the logging level, I searched through the hylafax archive, I've been changing the modem - nothing helped.
I was searching the Elsa Homepage but didn't find a config.modem file...

Thanks for any hints.

I've tested the following configs:

CLASS 1:
-----------
May 24 23:22:38.36: [  462]: SESSION BEGIN 00000024 491111111
May 24 23:22:47.28: [  462]: ANSWER: FAX CONNECTION
May 24 23:22:47.28: [  462]: MODEM input buffering enabled
May 24 23:22:47.28: [  462]: RECV FAX: begin
May 24 23:22:51.15: [  462]: REMOTE TSI "+491111111"
May 24 23:22:51.15: [  462]: REMOTE wants 9600 bit/s
May 24 23:22:51.15: [  462]: REMOTE wants page width 1728 pixels in 215 mm
May 24 23:22:51.15: [  462]: REMOTE wants unlimited page length
May 24 23:22:51.15: [  462]: REMOTE wants 3.85 line/mm
May 24 23:22:51.15: [  462]: REMOTE wants 1-D MR
May 24 23:22:53.76: [  462]: RECV: begin page
May 24 23:22:53.76: [  462]: RECV: send trigger 021

**** Process hangs after that - no more entries in log...

*** SNIP ********** 

ModemType:		Class1		# use this to supply a hint
ModemRate:		38400		# rate for DCE-DTE communication
ModemFlowControl:	rtscts		# XON/XOFF flow control assumed
#  ******** tested with XONXOFF as well. 
GettyArgs:		"-h %l dx_%s"	# modem must auto-detect fax/data
Class1Cmd:		AT+FCLASS=1	# command to enter class 1
Class1TCFResponseDelay:	75		# 75ms delay between recv TCF & response
Class1SendPPMDelay:	75		# 75ms delay before sending PPM
Class1SendTCFDelay:	75		# 75ms delay between sending DCS & TCF
Class1TrainingRecovery:	1500		# 1.5sec delay after training failure
Class1RecvAbortOK:	200		# wait 200ms for abort response
Class1FrameOverhead:	4		# 4 byte overhead in recvd HDLC frames
Class1RecvIdentTimer:	40000		# 35+5secs waiting for ident frames
Class1TCFMaxNonZero:	10		# max 10% of data may be non-zero
Class1TCFMinRun:	1000		# min run is 2/3rds of TCF duration



*********+ SNIP 

Class 2.0

May 24 23:30:11.12: [  562]: SESSION BEGIN 00000025 49111111
May 24 23:30:11.12: [  562]: <-- [4:ATA\r]
May 24 23:30:17.22: [  562]: --> [74:+FHT: FF 03 40 20 20 20 48 62 6D 47 20 6B 63 75 72 44 20 6B 69 66 61 72 47]
May 24 23:30:17.22: [  562]: --> [26:+FHT: FF 13 80 00 6E F8 00]
May 24 23:30:19.87: [  562]: --> [5:+FCON]
May 24 23:30:21.38: [  562]: --> [74:+FHR: FF 03 43 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 78 61 46]
May 24 23:30:21.60: [  562]: --> [23:+FHR: FF 13 83 00 62 70]
May 24 23:30:25.03: [  562]: --> [5:+FCFR]
May 24 23:30:25.03: [  562]: --> [28:+FTSI:"Fax                 "]
May 24 23:30:25.04: [  562]: --> [21:+FDCS:1,5,0,0,0,0,0,0]
May 24 23:30:25.04: [  562]: --> [2:OK]
May 24 23:30:25.04: [  562]: <-- [7:AT+FDR\r]
May 24 23:30:25.19: [  562]: --> [14:+FHT: FF 13 84]
May 24 23:30:27.08: [  562]: --> [7:CONNECT]
May 24 23:30:27.08: [  562]: <-- data [1]

*** Nothing happens after that point.



_______________________________________________________________________
1.000.000 DM gewinnen - kostenlos tippen - http://millionenklick.web.de
IhrName@web.de, 8MB Speicher, Verschluesselung - http://freemail.web.de