Re: flexfax: no response to mps?

[Dmitry Bely <dbely@mail.ru>]

Jamey Hopkins <jhopkins@direct-alliance.com> writes:

> Is there something I can do on my end to fix this?   What does it mean?
> 
> Thanks,
> JH
> 
> May 17 09:55:10.13: [24089]: <-- [7:AT+FDT\r]
> May 17 09:55:10.40: [24089]: --> [20:+FCS:1,3,0,2,0,0,0,2]
> May 17 09:55:15.90: [24089]: --> [7:CONNECT]
> May 17 09:55:15.90: [24089]: SEND begin page
> May 17 09:55:24.66: [24089]: SENT 15668 bytes of data
> May 17 09:55:24.66: [24089]: SEND 1D RTC
                               ^^^^^^^^^^^
This bug (redundant RTC) could lead to the error in your case. Try to apply 
RTN patch... BTW, if you use USR modem, nothing will possibly help you :-))

> May 17 09:55:24.66: [24089]: SEND end page
> May 17 09:55:24.66: [24089]: SEND send MPS (more pages, same document)
> May 17 09:55:43.29: [24089]: --> [7:+FHS:52]
> May 17 09:55:43.29: [24089]: REMOTE HANGUP: No response to MPS repeated 3
> times (code 52)

Means that the remote fax has not acknowledged the page reception. There
are *many* possible reasons for that (from unexpected line disconnect to
various firmware and software bugs)

> May 17 09:55:43.29: [24089]: <-- [5:ATH0\r]
> May 17 09:55:43.41: [24089]: --> [2:OK]
> May 17 09:55:43.42: [24089]: SESSION END

Hope to hear from you soon,
Dmitry